• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.2
• /
• pp.99-105
• /
• 1976

After investigation of soil characteristics the properties of a reclaimed marine soil (Gupo series) distributed along the southern coastal areas of Korea are summarized as follows: 1. Gupo soils distributed in the southern Ria coastal area are derived from rolling to hilly materials and are poorly sorted with less influences of river fluvial action. These soils have high content of sand compared with the broad fluvio-marine soils in the western coastal areas. 2. The morphological features of the poorly drained Gupo soils are greyish brown sandy loam with a few yellowish mottles in the surface horizon and are grey sandy loam with a few gravel in the sub-strata. The ground water table remains around 10-30cm below the surface. These soils, recently reclaimed younger deposits, do not show any evidence of illuviation. 3. The "n" value (about 0.8) of the Gupo soils indicates physically unripened soils. 4. pH value of these soils shows more than 8.0 throughout the profile. Organic matter contents are extremely low (around 0.5%) except 1.2 percent in the surface horizon. C.E.C. ranges from 7 to 9m.e/100g which is lower than average in the country. The ratios of extractable cations such as Ca, Mg, Na and K of the surface horizon are 20:7:4:1. Base saturation is more than 60%. Available phosphate content is very low that is less than 25 ppm. Electric conductivity of the soils at $25^{\circ}C$ ranges 7 to 12 mmhos/cm and increased with depth. 5. According to classification of soil based on physical ripening, the Gupo soils can be classified into "Unripe soils with half-ripe sub-soils". The soils could be classified into "Hydric Haplaquents" in the original of the 7th Approximation (1960), but into "Typic Haplaqents in the supplement of 7th approximation which the physical ripening condition is not clearly expressed. Soil Taxonomy, apparently the final version of the 7th approximation, defines the soils as "Haplic Hydraquents" that clearly show the condition of physical ripening as well as other properties. Other several classification systems applied do not describe physical ripening condition of the soils.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.47-55
• /
• 2015

Recently, the environment of a hospital information system is a trend to combine various SMART technologies. Accordingly, various smart devices, such as a smart phone, Tablet PC is utilized in the medical information system. Also, these environments consist of various applications executing on heterogeneous sensors, devices, systems and networks. In these hospital information system environment, applying a security service by traditional access control method cause a problems. Most of the existing security system uses the access control list structure. It is only permitted access defined by an access control matrix such as client name, service object method name. The major problem with the static approach cannot quickly adapt to changed situations. Hence, we needs to new security mechanisms which provides more flexible and can be easily adapted to various environments with very different security requirements. In addition, for addressing the changing of service medical treatment of the patient, the researching is needed. In this paper, we suggest a dynamic approach to medical information systems in smart mobile environments. We focus on how to access medical information systems according to dynamic access control methods based on the existence of the hospital's information system environments. The physical environments consist of a mobile x-ray imaging devices, dedicated mobile/general smart devices, PACS, EMR server and authorization server. The software environment was developed based on the .Net Framework for synchronization and monitoring services based on mobile X-ray imaging equipment Windows7 OS. And dedicated a smart device application, we implemented a dynamic access services through JSP and Java SDK is based on the Android OS. PACS and mobile X-ray image devices in hospital, medical information between the dedicated smart devices are based on the DICOM medical image standard information. In addition, EMR information is based on H7. In order to providing dynamic access control service, we classify the context of the patients according to conditions of bio-information such as oxygen saturation, heart rate, BP and body temperature etc. It shows event trace diagrams which divided into two parts like general situation, emergency situation. And, we designed the dynamic approach of the medical care information by authentication method. The authentication Information are contained ID/PWD, the roles, position and working hours, emergency certification codes for emergency patients. General situations of dynamic access control method may have access to medical information by the value of the authentication information. In the case of an emergency, was to have access to medical information by an emergency code, without the authentication information. And, we constructed the medical information integration database scheme that is consist medical information, patient, medical staff and medical image information according to medical information standards.y Finally, we show the usefulness of the dynamic access application service based on the smart devices for execution results of the proposed system according to patient contexts such as general and emergency situation. Especially, the proposed systems are providing effective medical information services with smart devices in emergency situation by dynamic access control methods. As results, we expect the proposed systems to be useful for u-hospital information systems and services.

• Journal of The Korean Association of Information Education
• /
• v.11 no.1
• /
• pp.21-28
• /
• 2007

Along with the development of telecommunication technology, educational role has been considerably changed and NEIS is introduced and operated for the digital educational administration. However, the function of NEIS is so limited when operated in each school. As a result, Korean government prepares the plan to install and operate a new School Affairs System by separating 3 areas from 27 areas of NEIS. School Affairs System has been used in schools since March, 2006. In this regard, this study attempts to analyze the current status and tasks of using the system in elementary schools. The result of the study shows that about 67% teachers use the system once or twice a day. Most of teachers answer that they get help from other teachers if they have any problem in operating the system. Many teachers affirmatively answer to the design and function of the system, and they are satisfied with the convenience and efficiency of the system. However, they feel difficulty to be familiar with the system sue to the frequent change. The importance of electronic certificate and personal information is well recognized and managed in terms of the security of the system. Facilities need to be well equipped, and information exchange system need to be developed to accept each school's request to improve the function of the system. In addition, applicable laws need to be arranged, clear guideline of educational administration agency and principal's strong intention are required to relieve teachers' work load.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.30-39
• /
• 2013

In recent years, with the development of devices to collect multimedia data such as small CMOS camera sensor and micro phone, studies on wireless multimedia sensor network technologies and their applications that extend the existing wireless sensor network technologies have been actively done. In such applications, various basic schemes such as the processing, storage, and transmission of multimedia data are required. Especially, a security for real world environments is essential. In this paper, in order to defend the sniffing attack in various hacking techniques, we propose a multipath routing scheme for physically avoiding the data transmission path from the risk factors. Our proposed scheme establishes the DEFCON of the sensor nodes that are geographically close to risk factors and the priorities according to the importance of the data. Our proposed scheme performs risk factor detour multipath routing through a safe path considering the DEFCON and data priority. Our experimental results show that although our proposed scheme takes the transmission delay time by about 5% over the existing scheme, it reduces the eavesdropping rate that can attack and intercept data by the risk factor by about 18%.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.361-370
• /
• 2004

All active nudes which have no physically direct connection with each other in If network must be able to compose and manage network topology Informations. Besides one active program can be performed by the active nodes when every active packet for this program is transmitted without any loss of packets. Also the active packets should be transmitted effectively to minimize the transmission delay and securely from threatens. In this thesis, the discovery scheme of active nodes is adapted for active nodes in IP networks to compose and manage the topology information. The scheme for the efficient, reliable and secure transmission of active packets is also proposed. The sequence number is assigned to every active packet. If a receiver detects the loss of active packet checking the sequence number, the receiver requests the retransmission of the lost packet to the previous active node. kiter receiving an active packet and adapting security and reliability schemes, intermediate active nodes not only copy and send the Packet Instantly but also apply some suity mechanisms to it. And the active packet transmission engine is proposed to provide these transmission schemes The simulation of the adapted active node discovery scheme and the proposed active packet transmission engine is performed. The simulation results show that the adapted active node discovery scheme is efficient and the proposed active engine has the low latency and the high performance.

• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.1-14
• /
• 2010

IEEE 802.15.4[1] has been standardized for the physical layer and MAC layer of LR-PANs(Low Rate-Wireless Personal Area Networks) as a technology for operations with low power on sensor networks. The standardization is applied to the variety of applications in the shortrange wireless communication with limited output and performance, for example wireless sensor or virtual wire, but it includes vulnerabilities for various attacks because of the lack of security researches. In this paper, we analyze the vulnerabilities against the denial of sleep attacks on the MAC layer of IEEE 802.15.4, and propose a detection mechanism against it. In results, we analyzed the possibilities of denial of sleep attacks by the modification of superframe, the modification of CW(Contention Window), the process of channel scan or PAN association, and so on. Moreover, we comprehended that some of these attacks can mount even though the standardized security services such as encryption or authentication are performed. In addition to, we model for denial of sleep attacks by Beacon/Association Request messages, and propose a detection mechanism against them. This detection mechanism utilizes the management table consisting of the interval and node ID of request messages, and signal strength. In simulation results, we can show the effect of attacks, the detection possibility and performance superiorities of proposed mechanism.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.9
• /
• pp.603-614
• /
• 2013

The popularity of mobile devices provides their users with a circumstance that services and information can be accessed wherever and whenever users need. Accordingly, various studies have been proposed personalized methods to improve accessibility of mobile users to information. However, since these personalized methods require users' private information, they gives rise to problems on security. An efficient way to resolve security problems is to estimate user information by using their online and offline behavior. In this paper, for this purpose, it is proposed a novel user information identification system that identifies users' personal and social information by using both his/her behavior on social network services and proximity patterns obtained from GPS data. In the proposed system, personal information of a user like age, gender, and so on is estimated by analyzing SNS texts and POI (Point of Interest) patterns, while social information between a pair of users like family and friend is predicted with proximity patterns between the users. Each identification module is efficiently designed to handle the characteristics of user data like much noise in SNS texts and missing signals in GPS data. In experiments to evaluate the proposed system, our system shows its superiority against ordinary identification methods. This result means that the proposed system can efficiently reflect the characteristics of user data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.185-191
• /
• 2015

This paper suggest the safety class communication board in order to design the safety network of the nuclear safety class controller. The reactor protection system use the digitized networks because from analog system to digital system. The communication board shall be provided to pass the required performance and test of the safety class in the digital network used in the nuclear safety class. Communication protocol is composed of physical layer(PHY), data link layer(MAC: Medium Access Control), the application layer in the OSI 7 layer only. The data link layer data package for the cyber security has changed. CRC32 were used for data quality and the using one way communication, not requests and not responses for receiving data, does not affect the nuclear safety system. It has been designed in accordance with requirements, design, verification and procedure for the approving the nuclear safety class. For hardware verification such as electromagnetic test, aging test, inspection, burn-in test, seismic test and environmental test in was performed. FPGA firmware to verify compliance with the life-cycle of IEEE 1074 was performed by the component testing and integration testing.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.3
• /
• pp.491-501
• /
• 2019

In side-channel analysis, which exploit physical leakage from a cryptographic device, deep learning based attack has been significantly interested in recent years. However, most of the state-of-the-art methods have been focused on classifying side-channel information in a profiled scenario where attackers can obtain label of training data. In this paper, we propose a new method based on deep learning to improve non-profiling side-channel attack such as Differential Power Analysis and Correlation Power Analysis. The proposed method is a signal preprocessing technique that reduces the noise in a trace by modifying Auto-Encoder framework to the context of side-channel analysis. Previous work on Denoising Auto-Encoder was trained through randomly added noise by an attacker. In this paper, the proposed model trains Auto-Encoder through the noise from real data using the noise-reduced-label. Also, the proposed method permits to perform non-profiled attack by training only a single neural network. We validate the performance of the noise reduction of the proposed method on real traces collected from ChipWhisperer board. We demonstrate that the proposed method outperforms classic preprocessing methods such as Principal Component Analysis and Linear Discriminant Analysis.

• The Korean Journal of Archival Studies
• /
• no.38
• /
• pp.3-35
• /
• 2013

The physical access or control of records with material entities is relatively easy. However, in the case of electronic records, due to its heightened applicative aspect that allows anyone with the authority to have access over the data, it requires an appropriate standard and stability to ensure the authenticity and integrity of electronic records. This study performed functional evaluation by extracting the minimum critical items from the national functional requirements documents and standards to explore the access control function that play an important role for the standard records management system to maintain quality requirements of electronic records. Based on this checklist, it evaluates whether the standard records management system properly carries out the access control function and investigates the current condition of application to practical records management work. Records managers generally do not use access control function, which may be because they do not feel the necessity, since the application of records management system is not yet actively promoted. In order for the standard records management system to be developed to become a more active system, it requires system improvement as well as considerations for below factors: First, although the necessity of establishing access control conditions is already recognized, it requires a clear stipulation of the regulation. Second, measures must be taken to implement access control in the records management system through document security solution. Third, it requires self-reflection of records manager, who utilizes the records management system. Instead of placing all responsibility on the National Archives, which established the system, professionals must further develop the system through continuous evaluation and improvement. Finally, a general discussion is required to publicize the issue of functional improvement of records management system. Although there is a bulletin board already created for this purpose, its users are extremely limited and it only deals with current problems. A space in online as well as in offline is required to solve the fundamental problems and exchange opinions.