• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1155-1160
• /
• 1999

The screening methodology modeling, dispersion modeling procedures for continuous and instantaneous releases of the gas phase flow from the storage tank and pressure relief valve were considered. This study was performed to develop the screening methodology for prediction and control of hazardous/toxic gas releases by estimating the 1-hr average maximum ground-level concentration of $Cl_2$ gas vs. downwind distance by incorporating source term model including the general/physical properties of released material and release mode of the $Cl_2$ storage tank of the chemical plant facilities, dispersion model, and meteorological/topographical data into the TSCREEN model. As the results of the study, it was found that dispersion modes of the dense gas were affected by the state of the released material, the released conditions, physical-chemical properties of released material, and the released modes (continuous and instantaneous releases), and especially largely affected by initial (depressurized) density of the released material and release emission rate as well as the wind velocity. Especially, this study was considered to release hazardous material as meteorological data. It was thought that this screening methodology can be useful as a preliminary guideline for application of the refined analysis model by developing the generic sliding scale methodology for various senarios selected.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.71-76
• /
• 2012

Biofouling by marine organisms such as algae and barnacles causes lots of significant problems in marine systems such as a rise of the maintenance-repair cost for the ship and the marine structures. In this work, a fluoropolymer, perfluoropolyether (PFPE), was applied as an anti-biofouling coating material that prevents the adhesion of marine organisms and facilitates the removal of them. Water contact angles of various surfaces were tested to examine the hydrophobicity of the PFPE-modified surface. The PFPE-modified surface showed the water contact angle of $64.5^{\circ}$ which is a remarkable rise from $46.7^{\circ}$ of amine-treated surface. When the substrate was treated with PFPE, the adhesion on the of the barnacle and other marine organisms were repressed around 15% by the enhanced hydrophobicity. In addition, the removal the of the adhered marine organisms were better comparing to that of the surface prepared by PDMS. Surfaces of the substrate treated by PFPE were characterized through physical and chemical methods to analyze the biofouling results. Degree of biomolecular adhesion to the substrate was quantified by the measurement the fluorescence intensity of marine organisms dyed with green fluorescence. PFPE is expected to be applicable not only to anti-biofouling systems but also to medical devices where the prevention of protein adhesion is required.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.415-420
• /
• 1985

In this study, changes in physical and chemical properties of glutinous rice during various soaking periods (0, 0.08, 1, 3, 5, 7, 10 days) were investigated in order to clarify the relations ship between soaking period and expansion volume in the preparation of Gang Jung. The longer the soaking period was, the greater the expansion volume of Gang Jung was. Higher maximum viscosity and breakdown in amylogram of glutinous rice flour were observed as the soaking period was increased, As the length of soaking period increased, hardness of glutinous rice and size of flour particle significantly decreased, while sweeling power and solubility of glutinous rice flour showed no significant difference. Increased length of soaking period was associated with higher fatty acidity, higher acidity of water extract and lower pH of glutinous rice flour. Control of flour particle size distribution resulted in significantly larger expansion volume of Gang Jung. Brabender's amylogram showed that the increase of expansion volume of Gang Jung associated with the increase of soaking period was related to the change of rheological properties of glutinous rice. It seemed that changes in viscometric properties of glutinous rice was attributed to the different flour particle size distribution resulted from changes in hardness of rice during soaking.

• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.117-121
• /
• 2009

Soybean curd (SC) is prepared through the elimination of water-insoluble components and molding by pressing. However, whole soybean curd (WSC) is made without the elimination of water-insoluble components and pressing. Therefore, it was considered that the components contained in WSC might be different from those in SC and we compared their contents of various components, hardness, and morphological features for this study. Ash, dietary fiber, and niacin contents were significantly higher in WSC than in SC. In addition, the carbohydrate and vitamin $K_1$ contents of WSC tended to be higher than those in SC, whereas the hardness of WSC was lower than that of SC. Moreover, electron microscopic analysis showed that the morphological characteristic of WSC consisted of considerably more fine retiform tissues in comparison to SC. Based on their compared nutrition, functional, and quality characteristics, it was suggested that WSC might be superior to SC.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.434-440
• /
• 2013

Functional properties of Cheonnyuncho fruit paste (CFP) were enhanced by fermentation, using Leuconostoc mesenteroides SM. The stability of CFP pigment was maintained and microorganisms in crude CFP were sterilized by heating at $80^{\circ}C$ for 30 min. The production of dextran in CFP was increased by increasing the fermentation time and sugar content, resulting in an increase of consistency. The CFP fermented with 20% sucrose contained 4.8% mucilage after fermentation for 2 days. In particular, the production of mucilage was greatly enhanced by fortification with 3% sodium citrate in CFP, resulting in mucilage production of 7%. In addition, the viscous modulus of fermented CFP showed a greater increase than that of the elastic modulus. Thus, it was concluded that CFP fermented by L. mesenteroides SM can be fortified with functional ingredients, such as mucilage and probiotics, with enhanced rheological properties. Therefore fermented CFP can be utilized as the functional ingredients for functional foods.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10c
• /
• pp.253-257
• /
• 2007

최근 웹 상에 정보가 폭발적으로 증가함에 따라, 사용자의 취향에 맞는 정보를 선별하여 제공하는 추천 시스템에 대한 연구가 활발히 진행되고 있다. 추천시스템은 사용자의 관심정보를 기술한 사용자 프로파일을 기반으로 동작하기 때문에 정확한 사용자 프로파일의 생성은 매우 중요하다. 사용자의 암시적인 행동정보를 기반으로 취향을 분석하는 대표적인 연구로 사용자가 이용한 웹 문서를 분석하는 방법이 있다. 이는 사용자가 이용하는 웹 문서에 빈번하게 등장하는 단어를 기반으로 사용자의 프로파일을 생성하는 것이다. 그러나 최근 웹 문서는 사용자 취향과 관련 없는 많은 구성요소들(로고, 저작권정보 등)을 포함하고 있다. 따라서 이러한 내용들을 모두 포함하여 웹 문서를 분석한다면 생성되는 프로파일의 정확도는 낮아질 것이다. 따라서 본 논문에서는 사용자 기기에서 사용자의 웹 문서 이용내역을 분석하고, 동일한 사이트로부터 얻어진 문서들에서 반복적으로 등장하는 블록을 제거한 후, 정보블럭을 식별하여 사용자의 관심단어를 추출하는 새로운 프로파일 생성방법을 제안한다. 이를 통해 보다 정확하고 빠른 프로파일 생성이 가능해진다. 본 논문에서는 제안방법의 평가를 위해, 최근 구매활동이 있었던 사용자들이 이용한 웹 문서 데이터를 수집하였으며, TF-IDF 방법과 제안방법을 이용하여 사용자 프로파일을 각각 추출하였다. 그리고 생성된 사용자 프로파일과 구매데이터와의 연관성을 비교하였으며, 보다 정확한 프로파일이 추출되는 결과와 프로파일 분석시간이 단축되는 결과를 통해 제안방법의 유효성을 입증하였다.)으로 높은 점수를 보였으며 내장첨가량에 따른 관능특성에서는 온쌀죽은 내장 $2{\sim}5%$ 첨가, 반쌀죽은 내장 $3{\sim}5%$ 첨가구에서 유의적(p<0.05)으로 높은 점수를 보였으나 쌀가루죽은 내장 $1{\sim}2%$ 첨가구에서 유의적(p<0.05)으로 낮은 점수를 보였다. 이상의 연구 결과를 통해 온쌀은 2%, 반쌀은 3%, 쌀가루는 4%의 내장을 첨가하여 제조한 전복죽이 이화학적, 물성적 및 관능적으로 우수한 것으로 나타났다.n)방법의 결과와 비교하였다.다. 유비스크립트에서는 모바일 코드의 개념을 통해서 앞서 언급한 유비쿼터스 컴퓨팅 환경에서의 문제점을 해결하고자 하였다. 모바일 코드에서는 프로그램 코드가 네트워크를 통해서 컴퓨터를 이동하면서 수행되는 개념인데, 이는 물리적으로 떨어져있으면서 네트워크로 연결되어 있는 다양한 컴퓨팅 장치가 서로 연동하기 위한 모델에 가장 적합하다. 이는 기본적으로 배포(deploy)라는 단계가 필요 없게 되고, 새로운 버전의 프로그램이 작성될지라도 런타임에 코드가 직접 이동하게 되므로 버전 관리의 문제도 해결된다. 게다가 원격 함수를 매번 호출하지 않고 한번 이동된 코드가 원격지에서 모두 수행을 하게 되므로 성능향상에도 도움이 된다. 장소 객체(Place Object)와 원격 스코프(Remote Scope)는 앞서 설명한 특징을 직접적으로 지원하는 언어 요소이다. 장소 객체는 모바일 코드가 이동해서 수행될 계산 환경(computational environment

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.199-206
• /
• 2013

The Daehyun gold-silver deposit consists of two hydrothermal quartz veins that fill NE-trending fractures in the Cambro-Ordovician calcitic marble. I have sampled wallrock, hydrothermaly-altered rock and gold-silver ore vein to study the element dispersion and element gain/loss during wallrock alteration. The hydrothermal alteration doesn't remarkably recognized at this deposit and consists of mainly calcite, dolomite, quartz and minor epidote. The ore minerals composed of arsenopyrite, pyrrhotite, pyrite, sphalerite, stannite, chalcopyrite, galena, electrum, native bismuth and silver-bearing mineral. Based on analyzed data, the chemical composition of wallrock consists of mainly $SiO_2$, CaO, $CO_2$ with amounts of $Al_2O_3$, $Fe_2O_3(T)$ and MgO. The contents of $SiO_2$, $Fe_2O_3(T)$, MgO, CaO and $CO_2$ vary significantly with distance from ore vein. The element dispersion doesn't remarkably recognized during wallrock alteration and only occurs near the ore vein margin because of physical and chemical properties of wallrock. Remarkable gain elements during wallrock alteration are $Fe_2O_3(T)$, total S, Ag, As, Bi, Cd, Cu, Ni, Pb, Sb, Sn, W and Zn. Remarkable loss elements are $SiO_2$, MnO, MgO, CaO. $CO_2$ and Sr. Therefore, Our result may be used when geochemical exploration carry out at deposits hosted calcitic marble in the Hwanggangri metallogenic district.

• The Journal of Engineering Geology
• /
• v.4 no.2
• /
• pp.153-168
• /
• 1994

The status of groundwater development in Chungnam was studied with geological characteristics according to the measured data of Korean Rural Development Corporation. The data of 212 survey wells were used for the relation between catchment area and water discharge, and the data of 344 development wells for the relationships between well depth and discharge, between casing depth and discharge, between rock type and discharge, and the relation with lineaments density. The relationship between the catchment area and discharge does not show any special trend, and it is understood that groundwater of hard rock mass is not so much influenced by the surface catchment area. The relationship between well depth and discharge shows two different trends; discharge increasing with depth for alluvial groundwater, but no certain trend between depth and discharge for groundwater of hard rock zone. Discharge increases linearly with the casing depth, and it is reliable because the casing was installed in the weathered zone against well destruction. Generally the rock type does not show any difference of discharge, but the crystalline rocks such as granite and gneiss yield a little more discharge than the more porous rocks such as sedimentary rock or schist. It suggests that the effect of fracture zone is a major governing factor. In Hongsong and Puyo, there are similar in rock type and casing depth, but the big difference in average discharge. The big discharge of Hongsong is concordant with the higher intersection density and longer length of lineament in Hongsong than those of Puyo. Therefore the groundwater development strategy should be focused on the micro topography analysis and geophysical survey for the understanding of the fracture zone rather than catchment area or rock type.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.22-32
• /
• 2014

Durability is one of the most important and attractive subjects in concrete research field because not only durability of concrete is reduced by various degradation factors but also its reduction adversely influences the structural performance and service life of concrete structure. For this reason, a considerable amount of papers associated with concrete durability have been published and those researches were mainly focused on the changes of intrinsic properties of concrete due to chemicophysical degradations. However, the relationship between durability of concrete and structural behavior of concrete member has not been well established yet. In this study, calcium leaching degradation, a cause of concrete strength reduction, was dealt with. The experiments of compressive and flexural behavior of degraded concrete member were performed to evaluate the characteristics of structural behavior according to degradation level. Finally, the results from the experiments were compared with those obtained from nonlinear FEM analysis. The results from this study clearly showed that leaching degradation leads to decrease in compressive strength and compressive behavior evolves from brittle to ductile failure pattern during the degradation process. Load capacity and flexible rigidity of the degraded RC member decreased when the degradation level increased, in compressive zone. Additionally, it was found that the values from nonlinear FEM analysis, CDP model in ABAQUS, coincided well with the experimental results.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.135-141
• /
• 2020

Although the graphene is regarded as a promising material for the electrode of the supercapacitor, its electrochemical performance is still less enough to satisfy the current demand raised in real applications. Here, using a home laser engraver, firstly we performed the prompt and selective reduction of the graphene oxide to produce multilayered and highly porous graphene maintaining high electrical conductivity. Subsequently, the resulting graphene was conformally deposited with pseudocapacitive thin VO_x using atomic layer deposition in order to enhance specific capacitance of graphene. We observed that various forms of VO_x exist in the VO_x/graphene hybrid through XPS analysis. The hybrid showed highly improved specific capacitance (~189 F/g) as compared to the graphene without VO_x. We expect that our approach is accepted as one of the alternatives to produce the graphene-based electrode for various energy storage devices.