• Journal of Hospice and Palliative Care
• /
• v.8 no.2
• /
• pp.152-155
• /
• 2005

Purpose: The lower extremity edema (LEE) is a common distressful symptom in advanced cancer patients and is hard to manage. We analyze the characteristics of LEE in patients with advanced cancer to provide the basic information of causes and adequate management. Methods: Physical examination, assessment of the location and severity of edema, blood chemistry (albumin, creatinine), Doppler Sono for patients with suspecting deep vein thrombosis (DVT), and abdomen CT scan for patient with suspecting lymph edema were performed. Severity of edema was classified according to NCI lymph edema scaling and improvement was defined as lowering at least 1 grade of edema after management. Results: Among 154 patient who had been admitted to Hospice Ward from Mar 2003 to Jan 2004, 33 had LEE, and 6 had both upper extremity edema and LEE except generalized edema. Their underlying cancers were stomach (7), lung (6), biliary tract (5), liver (5), colorectal (5), pancreas (2), and others (9). There were 12 patient with grade I, 20 patients with grade II, and 7 patients with grade III edema. The causes were hypoalbuminemia (11), lymph edema (10), DVT (7), obstruction of inferior vena cava (IVC) or portal vein (6), and dependent edema (5). The common managements were including leg elevation and diuretics. Elastic stocking was applied for patients with DVT and leg massage and pneumatic compression was used for lymph edema. The 2/3 patients were improved after management. Conclusion: The incidence of LEE in terminal cancer pts was high (25.3%) and their causes were variable including lymph edema, DVT, hypoalbuminemia and dependent edema. Active noninvasive management according to causes could result in good palliation.

• Applied Microscopy
• /
• v.38 no.3
• /
• pp.175-183
• /
• 2008

Liver regeneration is a result of highly coordinated proliferation of hepatocytes and non-parenchymal liver cells. At this process, induction of metallothionein (MT), which is low molecular and cysteine rich, has been reported. The present study was carried to find the ultrastructure of hepatocytes and determine the expression of MT in regenerating rat liver after partial hepatectomy. As a result, the remnant liver after PH grew fast from 1 day until 7 days. Various changes were morphologically observed. Disintegration of cell plates and liver lobule appeared shortly after PH. And hepatocytes showed the rapid proliferation, characterized by high nuclear cytoplasmic ratio, weak intercellular junctional complexes, chromatin condensation, increase of ribosomes and mitochondria, and temporary increase of lipid droplets. Finally, remodeling of the liver lobule was completed through the rearrangement of blood vessels and cell plates by 7 days after PH. On histochemistry, immunoreactivity indicating the presence of MT appeared moderately throughout the cytoplasm of control rat hepatocyte. After PH, positive reactions for MT increased at the cytoplasm and the nucleus. These results suggest that the remnant liver cells immediately entered cell proliferation and increase of MT expression after PH. It is thought that MT protein might be associated with transfer of some factors needed to cell division from the cytoplasm to the nucleus for regeneration of the liver after PH.

• Clinics in Shoulder and Elbow
• /
• v.15 no.1
• /
• pp.16-24
• /
• 2012

Purpose: This study was designed to investigate the rate of incidence, location and the clinical value of the rotator cuff retear by analyzing MRI scans, which was taken after an arthroscopic rotator cuff repair. Materials and Methods: This study included a total of 109 patients, who underwent a shoulder MRI scan after an average of 10.6 months later from the arthroscopic rotator cuff repair. We only defined the 'retear' when the Sugaya type IV and V was observed in the sagittal section of the MRI. The location of the retear was divided into the medial and lateral areas by the site, which was 1 cm medial to the anchor insertion. We investigated the incidence rate and the location of the retear, in terms of the age, sex, initial tear size and the suture method. Also, we compared the functional score of the retear group and the non-retear group, after an average of 13.9 months follow-up. Results: There were 38 of the 109 patients that showed the rotator cuff retear. Of these patients, 25 were male patients, and 13 were female patients. Of the 38 patients with the rotator cuff retear, 21 patients were included in the <3 cm retear group, and 17 were included in the ${\geqq}3$ cm retear group. At the end of the follow up period, all 109 patients showed a statistical significant improvement in the shoulder functional score. Conclusion: According to the follow up of the MRI scan, which was taken after the rotator cuff repair, the retear rate reached 34.9 %, and there were no significant differences on the age and the suture method. More rotator cuff retear occurred in male patients, and the initial tear size was positively correlated with the incidence rate of the rotator cuff retear. Also, the retear was more frequently observed at the medial side. That is because when the suture was performed, excessive tension was loaded on the medial side of the suture site.

• Korean Journal of Poultry Science
• /
• v.41 no.2
• /
• pp.77-85
• /
• 2014

This study was conducted to investigate the effect of duck and pork meat mixing ratio on quality characteristics of emulsion type sausage at $4^{\circ}C$ during 5 weeks. Treatments on the basis of the meat content were subjected to 100% duck meat (T1), 100% pork meat (T2), 50% duck meat + 50% pork meat (T3), 40% duck meat + 60% pork meat (T4), and 30% duck meat + 70% pork meat (T5). The moisture content was significantly (p<0.05) higher in TI sample but significantly (p<0.05) lower in T2 sample than those in comparison to the other treatments. Crude protein and fat content were significantly (p<0.05) higher in T2 sample compared to the other treatments. CIE $L^*$value was significantly (p<0.05) lower in T1 sample than those of other treatments until 5 weeks of cold storage. CIE $a^*$value was significantly (p<0.05) higher in T1 sample but significantly (p<0.05) lower in T2 sample than those in comparison to the other treatments until 5 weeks of cold storage. Hardness was significantly (p<0.05) higher in T4 sample compared to the other treatments during all cold storage. Cohesiveness was significantly (p<0.05) higher in T5 sample compared to the other treatments until 2 weeks of cold storage. The results of sensory evaluation showed that the meat flavor, taste and texture were significantly (p<0.05) lower in T5 sample compared to the other treatments whereas no difference among treatments except T5 sample. Overall acceptability was significantly (p<0.05) lower in T5 sample compared to the other treatments. Therefore, these results suggested that the ratio of 40% duck meat and 60% pork meat is appropriate levels for hardness and palatability when manufacturing emulsion type sausage with duck meat.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.201-210
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mats. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributons. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks dial not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the $K_{I}$ vague increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.s.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.447-456
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mass. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributions. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks did not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the K$_1$ value increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.18-23
• /
• 2010

Purpose: PET/CT combines functional and morphologic data and increases diagnostic accuracy in a variety of malignancies. Especially reconstructed Fusion PET/CT images or MIP (Maximum Intensity Projection) images from a 2-dimensional image to a 3-dimensional one are useful in visualization of the lesion. But in Fusion & MIP 3D reconstruction image, due to hot uptake by urine or urostomy bag, lesion is overlapped so it is difficult that we can distinguish the lesion with the naked eye. This research tries to improve a distinction by removing parts of hot uptake. Materials and Methods: This research has been conducted the object of patients who have went to our hospital from September 2008 to March 2009 and have a lot of urine of remaining volume as disease of uterus, bladder, rectum in the result of PET/CT examination. We used GE Company's Advantage Workstation AW4.3 05 Version Volume Viewer program. As an analysis method, set up ROI in region of removal in axial volume image, select Cut Outside and apply same method in coronal volume image. Next, adjust minimum value in Threshold of 3D Tools, select subtraction in Advanced Processing. It makes Fusion & MIP images and compares them with the image no using Region Cut Definition. Results: In Fusion & MIP 3D reconstruction image, it makes Fusion & MIP images and compares them by using Advantage Workstation AW4.3 05's Region Cut Subtraction, parts of hot uptake according to patient's urine can be removed. Distinction of lesion was clearly reconstructed in image using Region Cut Definition. Conclusion: After examining the patients showing hot uptake on account of volume of urine intake in bladder, in process of reconstruction image, if parts of hot uptake would be removed, it could contribute to offering much better diagnostic information than image subtraction of conventional method. Especially in case of disease of uterus, bladder and rectum, it will be helpful for qualitative improvement of image.

• 한국해양학회지
• /
• v.30 no.3
• /
• pp.184-196
• /
• 1995

The line-SW is located in the mouth of Gomso Bay (20 Km long and 5-8 Km wide),west coast of Korea. This area is composed of sand flat, mud flat, sand shoal and chenier, The difference of physical, geological and geomorphic conditions in subenvironments of the bay may control and produce distingtive foraminiferal populations and assemblages. This study investigates whether five a priori subenvironments (five local zonations) in Gomso-Bay tidal flat can be distinguished from each other on the basis of total (living plus dead) foraminiferal assemblages. Seventy-four species (67 benthic; 7 planktonic) were recorded in total assemblages of surface sediments from 10 stations. Ammonia beccarii tepida, Discorbis candeiana, Elphidium etigoense and Eponides nipponicus were most dominant species in living and total assemblages. The relative abundance (%) of living population was high at upper flat and decreased from upper to lower flat. The low percentages of living populations in middle to lower flat are probably influenced by the decreasing reproduction of foraminifera caused by high energy condition and addition of dead species from offshore. The occurence of planktonic foraminifera in middle to lower flat (5.3∼6.6%) indicates introduction of planktonic foraminifera from offshore by storm and/or tidal current. The relatively high numbers of species in lower middle to lower flat are probably caused by a mixing of faunas from these areas and offshore. The high numbers of total individuals per 50 ml of sediment in upper flat indicate that this area is a relatively stable environment where waves and currents are protected by the chenier. Five biofacies of the total foraminiferal assemblages were established on the basis of dominant species (those representing more than 20% of the total assemblages in any station) in the five a priori subenvironments recognized along the Line-SW transect in Gomso-Bay tidal flat. Five biofacies are potentially useful in paleoenvironmental interpretation in late Quaternary Gomso-Bay tidal deposits.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.3
• /
• pp.124-141
• /
• 1998

The objectives of this study are to investigate the trace (minor) elemental and isotopic compositions of calcitic skeletons, such as barnacle, echinoid, branching and encrusting calcareous algae and oyster, from the eastern coast of Korean peninsula and Cheju Island, and to compare their variations with latitude, that is, the temperature of ambient seawater at which the skeletons grew. Articulated and encrusting red algae are composed of high-Mg calcite (7-21 mol% $MgCO_3$). Echinoids are also composed of high-Mg calcite (7-15 mol% $MgCO_3$). Whereas barnacles are composed of low-Mg calcite (1-5 mol% $MgCO_3$). The Mg compositions of articulated red algae, barnacle and oyster tend to increase with increasing water temperature, whereas those of encrusting red algae and echinoid do not show any trend. Sr compositions of articulated red algae, echinoid and barnacle tend to decrease with increasing water temperature, whereas those of encrusting red algae and oyster do not show any trend. Mn compositions of articulated red algae and encrusting red algae decrease with an increase of water temperature, whereas those of echinoid and barnacle do not show any trend. Fe compositions of articulated red algae tend to decrease with increasing water temperature, whereas those of encrusting red algae and oyster increase. Fe compositions of echinoid and barnacle do not show any trend with water temperature variations. Ba compositions of echinoid and low-magnesium calcitic skeletons do not show any trend with water temperature variations. Ba compositions of articulated red algae tend to decrease with increasing water temperature, whereas those of encrusting red algae increase. Cd and Pb compositions of all the skeletons tend to increase with increasing water temperature. Cu compositions of encrusting red algae increase with increasing water temperature, whereas articulated red algae, echinoid, barnacle and oyster do not show any trend. Zn compositions of high-magnesium calcitic skeletons and low-magnesium calcitic skeletons do not show any trend. Estimated water temperatures from oxygen isotopic data of all the skeletons except for the barnacle arc higher than the range of temperature of the shallow seawater of the East Sea and around Cheju Island. The oxygen isotopic compositions of oyster and echinoid are well clustered, and they do not show any trend with increasing water temperature. Therefore, this could reflect that the organisms have not secreted their shells in oxygen isotopic equilibrium with ambient seawater due to vital effect. Thus, the oxygen isotopic composition of barnacle can potentially be utilized for paleotemperature estimate whereas those of other organisms in this study may not be useful.

• Journal of the Korean Society of Radiology
• /
• v.14 no.6
• /
• pp.841-848
• /
• 2020

In the field of radiation therapy using photon beams and electron beams, since each patient has a different sensitivity to radiation, skin side effects may occur even at the same dose. Therefore, if there is a risk of excessive dose to the skin, a dosimeter is attached to verify whether the correct dose is being investigated. However, since the skin dosimeter checks the attachment site visually by measuring a point dose, it is difficult to confirm an accurate dose distribution. As a result, the measurement and simulation errors of the material HgI₂ in the 6 MV photon beam were 3.73% and 5.24%, respectively, at the minimum thickness of 25 ㎛, and the material PbI₂ was 4.73% and 5.65%, respectively. On the other hand, as a result of the 6 MeV electron beam, the measurement and simulation errors of the material HgI₂ were 1.35% and 1.12%, respectively, at a minimum thickness of 25 ㎛, and the material PbI₂ showed relatively low attenuation error, 1.67% and 1.20%, respectively. Therefore, it was evaluated that the thickness of the photon beam within 25 ㎛ and the electron beam within 100 ㎛ is suitable to have a reduction rate error within 5%. This study presents a new research direction for a flexible dosimeter attached to the human body that is required in clinical practice and the construction conditions of a future skin dosimeter.