• Journal of Gastric Cancer
• /
• v.9 no.4
• /
• pp.215-222
• /
• 2009

Purpose: Billroth II gastroenterostomy is a typical reconstruction method after distal gastrectomy for gastric carcinoma, but it has problems, especially frequent reflux esophagitis. Various methods have been tried to address this problem. Among them are Braun enteroenterostomy and Roux-en-Y gastroenterostomy, which are performed separately according to the size of the gastric remnant. The aim of our study was to determine whether these applications are compatible. Materials and Methods: Between September 2003 and April 2007, we performed Roux-en-Y gastroenterostomy operations (14 patients) when the size of the gastric remnant was <10%, Braun enteroenterostomy (17 patients) when the size was between 10 and 20%, and Billroth II gastroenterostomy (14 patients) when the size was between 20 and 40% after subtotal gastrectomy for gastric cancer by a single surgeon at our hospital. We analyzed the results of each treatment. We evaluated the symptoms and endoscopic findings using questionnaires and hospital records. To evaluate nutritional states, we reviewed albumin and hemoglobin levels and body weight changes. Results: All operations were performed safely mortality was 0% and postoperative complications were 8.9%. On endoscopy, reflux gastritis was observed to occur in 7.63%, 18.65% and 40.0%, respectively, of patients who had undergone Roux-en-Y, Braun and Billroth II operations (P=0.13). Reflux esophagitis was observed in 1 patient in the Roux-en-Y group and 1 patient in the Braun group. Endoscopic gastrostasis was observed in 2 patients in the Roux-en-Y group, one of which was thought to cause reflux esophagitis. Patients in the Roux-en-Y group and Braun groups ingested a lower volume of food than did those in the Billroth II group (respectively, 7.1%, 0.0% and 28.7%) and complained less of postprandial discomforts (respectively, 14.3%, 23.5% and 57.1%) and reflux symptoms (respectively 0.0%, 11.8% and 42.9%). Conclusion: The application of Braun enteroenterostomy and Roux-en-Y gastroenterostomy to the small gastric remnant may be effective for reducing reflux symptoms and abdominal discomfort after distal gastric resection. We recommend Roux-en-Y gastroenterostomy when the size of the gastric remnant is <10%, and Braun anastomosis in the others. It will need to be determined which reconstructive procedure is better for many different conditions.

• Journal of Gastric Cancer
• /
• v.8 no.1
• /
• pp.9-19
• /
• 2008

Purpose: Gastric cancer is the most common malignant tumor in Korea. We reviewed the cases at our institution to identify the survival rates and clarify the prognostic factors of patients with gastric cancer. Materials and Methods: We conducted a retrospective study of 6,918 patients who had received a diagnosis of gastric cancer, and they underwent surgery at Korea Cancer Center Hospital during a 15-year period from 1991 to 2005. Results: The overall 5-year survival rate was 66.8%. The univariate analysis revealed that age, location of tumor, gross type of tumor, the histology according to the WHO classification, the Lauren classification, depth of invasion (T stage), lymph node metastasis (N stage), distant metastasis (M stage), the type of surgery, the UICC TNM stage, postoperative complications, adjuvant chemotherapy, lymphatic invasion, venous invasion and perineural invasion were the significantly different factors of the survival rates. The multivariate analysis revealed that age, Borrmann type 4, the histology according to the WHO classification, depth of invasion (T stage), lymph node metastasis (N stage), distant metastasis (M stage), the type of surgery, UICC TNM stage, postoperative complications, adjuvant chemotherapy and lymphatic invasion were the independent prognostic factors. Conclusion: We have shown a statistically significant association between the survival rates after operation for gastric cancer and the clinicopathologic factors. Early diagnosis of gastric cancer, appropriate surgeryand adjuvant therapy might improve the quality of life and the survival rates of gastric cancer patients.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.487-494
• /
• 2005

Nowadays a large amount of wastewater containing metal working fluids and cleaning agents is generated during the cleaning process of parts working in various industries of automobile, machine and metal, and electronics etc. In this study, aqueous or semi-aqueous cleaning wastewater contaminated with soluble or nonsoluble oils was treated using ultrafiltration system. And the membrane permeability flux and performance of oil-water separation (or COD removal efficiency) of the ultrafiltration system employing PAN as its membrane material were measured at various operating conditions with change of membrane pore sizes and soil concentrations of wastewater and examined their suitability for wastewater treatment contaminated with soluble or insoluble oil. As a result, in case of wastewater contaminated with soluble oil and aqueous or semi-aqueous cleaning agent, the membrane permeability increased rapidly even though COD removal efficiency was almost constant as 90 or 95％ as the membrane pore size increased from 10 kDa to 100 kDa. However, in case of the wastewater contaminated with nonsoluble oil and aqueous or semi-aqueous cleaning agent, as the membrane pore size increased from 10 kDa to 100 kDa and the soil concentration of wastewater increased, the membrane permeability was reduced rapidly while COD removal efficiency was almost constant. These phenomena explain that since the membrane material is hydrophilic PAN material, it blocks nonsoluble oil and reduces membrane permeability. Thus, it can be concluded that the aqueous or semi-aqueous cleaning solution contaminated with soluble oil can be treated by ultrafiltration system with the membrane of PAN material and its pore size of 100 kDa. Based on these basic experimental results, a pilot plant facility of ultrafiltration system with PAN material and 100 kDa pore size was designed, installed and operated in order to treat and recycle alkaline cleaning solution contaminated with deep drawing oil. As a result of its field application, the ultrafiltration system was able to separate aqueous cleaning solution and soluble oil effectively, and recycle them. Further more, it can increase life span of aqueous cleaning solution 12 times compared with the previous process.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.15-24
• /
• 2018

Despite the recognition of the need for productivity information and its importance, the feedback of productivity information is not well-established in the construction industry. Effective use of productivity information is required to improve the reliability of construction planning. However, in many cases, on-site productivity information is hardly management effectively, but rather it relies on the experience and/or intuition of project participants. Based on the literature review and expert interviews, the authors recognized that one of the possible solutions is to develop a systematic approach in dealing with productivity information of the construction job-sites. It is required that the new system should not be burdensome to users, purpose-oriented information management, easy-to follow information structure, real-time information feedback, and productivity-related factor recognition. Based on the preliminary investigations, this study proposed a framework for a novel system that facilitate the effective management of construction productivity information. This system has utilized Sketchup software which has good user accessibility by minimizing additional data input and related workload. The proposed system has been designed to input, process, and output the pertinent information through a four-stage process: preparation, input, processing, and output. The inputted construction information is classified into Task Breakdown Structure (TBS) and Material Breakdown Structure (MBS), which are constructed by referring to the contents of the standard specification of building construction, and converted into productivity information. In addition, the converted information is also graphically visualized on the screen, allowing the users to use the productivity information from the job-site. The productivity information management system proposed in this study has been pilot-tested in terms of practical applicability and information availability in the real construction project. Very positive results have been obtained from the usability and the applicability of the system and benefits are expected from the validity test of the system. If the proposed system is used in the planning stage in the construction, the productivity information and the continuous information is accumulated, the expected effectiveness of this study would be conceivably further enhanced.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.3
• /
• pp.172-180
• /
• 2012

The $LiMn_2O_4$ cathodes for lithium ion battery were synthesized from various precursors of manganese oxides and manganese hydroxides. As the first step, nanosized precursors such as ${\alpha}-MnO_2$ (nano-sticks), ${\beta}-MnO_2$ (nano-rods), $Mn_3O_4$ (nano-octahedra), amorphous $MnO_2$(nano-spheres), and $Mn(OH)_2$ (nano-plates) were prepared by a hydrothermal or a precipitation method. Spinel $LiMn_2O_4$ with various sizes and shapes were finally synthesized by a solid-state reaction method from the manganese precursors and LiOH. Nano-sized (500 nm) octahedron $LiMn_2O_4$ showed high capacities of 107 mAh $g^{-1}$ and 99 mAh $g^{-1}$ at 1 C- and 50 C-rate, respectively. Three dimensional octahedral crystallites exhibit superior electrochemical characteristics to the other one-dimensional and two-dimensional shaped $LiMn_2O_4$ nanoparticles. After 500 consecutive charge discharge battery cycles at 10 C-rate with the nano-octahedron $LiMn_2O_4$ cathode, the capacity retention of 95% was observed, which is far better than any other morphologies studied in this work.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.122-126
• /
• 2003

In this study, $Zn_{0.86}Mn_{0.14}$Te epilayer of 0.7 $\mu\textrm{m}$-thickness was grown on GaAs(100) substrate by using hot wallepitaxy. GaAs(100) substrate was removed from $Zn_{0.86}Mn_{0.14}$Teepilayer by the selective etching solution. The crystal structure and the lattice constant of only Z $n_{0.86}$ M $n_{0.14}$Te epilayer were investigated to be zincblende and 6.140 $\AA$ from X-ray diffraction pattern, respectively. Mn composition x of $Zn_{1-x}Mn_x$Te epilayer was found to be 0.14 using this lattice constant and Vegard's law. The crystal quality of the epilayer was confirmed to be very good due to 256 arcsec-full-width at half-maximum of the double crystal rocking curve. The absorption spectra from the transmission ones were obtained to measure the band gap energy of $Zn_{0.86}Mn_{0.14}$Te epilayer from 300 K to 10 K. With the decreasing temperature,. strong absorption regions in the absorption spectra were shifted to higher energy side and the absorption peak meaning the free exciton formation appeared near the absorption edge. The band gap energy values of $Zn_{0.86}Mn_{0.14}$Te epilayer at 0 K and 300 K were found to be almost 2.4947 eV and 2.330 eV from the temperature dependence of the free exciton peak position energy of $Zn_{0.86}Mn_{0.14}$Te epilayer, respectively. The free exciton peak position energy of $Zn_{0.86}Mn_{0.14}$Te epilayer without GaAs substrate was larger 15.4 meV than photoluminescence peak position energy at 10 K. This energy difference between two peaks was analysed to be Stokes shift.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2012

In general, the fabrications of the LEDs with mesa structure are performed grown by MOCVD method. In order to etch and separate each chips, the LEDs are passed the RIE and scribing processes. The RIE process using plasma dry etching occur some problems such as defects, dislocations and the formation of dangling bond in surface result in decline of device characteristic. The SAG method has attracted considerable interest for the growth of high quality GaN epi layer on the sapphire substrate. In this paper, the SAG method was introduced for simplification and fabrication of the high quality epi layer. And we report that the size of selective area do not affect the characteristics of original LED. The diameter of SAG circle patterns were choose as 2500, 1000, 350, and 200 ${\mu}m$. The SAG-LEDs were measured to obtain the device characteristics using by SEM, EL and I-V. The main emission peaks of 2500, 1000, 350, and 200 ${\mu}m$ were 485, 480, 450, and 445 nm respectively. The chips of 350, 200 ${\mu}m$ diameter were observed non-uniform surface and resistance was higher than original LED, however, the chips of 2500, 1000 ${\mu}m$ diameter had uniform surface and current-voltage characteristics were better than small sizes. Therefore, we suggest that the suitable diameter which do not affect the characteristic of original LED is more than 1000 ${\mu}m$.

• Journal of the Korean earth science society
• /
• v.21 no.2
• /
• pp.103-115
• /
• 2000

The ability-grouping is the essence of the seventh educational curriculum, applied to school from year 2000, and its enriched-supplementary type will be carried out for science course. This study examines the effect of the enriched-supplementary ability-grouping within class to student's academic achievement and the attitude, related to science. Thus we developed teaching and learning methods with intellectual level about the subject of 'Water Circulation and Weather Change' in Middle-School Science 2. Then we tested 152 eighth graders who were divided into the experimental and control groups. The experimental one was taught through the ability-grouping for about six weeks, while the control through conventional lecture. The improvement of the experimental group in academic achievement was more effective than that of the control, and particularly to below-average students who ranked in lower thirty percent. The experimental one got more negative change in domain 'Science as a Subject, and in subdomain 'Anxiety in Science Lesson'. While outstanding students who ranked in upper thirty percent showed a significant positive change in subdomain 'Satisfaction in Teaching Method, the below-average were negatively changed in subdomain 'Anxiety in Science Lesson'. The current ability-grouping was suitable for the improvement of academic achievement, but not for the general attitude related to science. In order to enhance the ability-grouping effect in science education, we need to additionally consider student's interest and concern in grouping, and develop various teaching and learning methods together with proper textbook contents.

• Journal of the Korean earth science society
• /
• v.21 no.2
• /
• pp.137-158
• /
• 2000

The correlation and Empirical Orthogonal Function (EOF) analyses over the globe have been applied to intercompare lower-stratospheric (${\sim}$70hPa) temperature obtained from satellite data and two model reanalyses. The data is the19 years (1980-98) Microwave Sounding Unit (MSU) channel 4 (Ch4) brightness temperature, and the reanalyses are GCM (NCEP, 1980-97; GEOS, 1981-94) outputs. In MSU monthly climatological anomaly, the temperature substantially decreases by ${\sim}$21k in winter over southern polar regions, and its annual cycle over tropics is weak. In October the temperature and total ozone over the area south of Australia remarkably increase together. High correlations (r${\ge}$0.95) between MSU and reanalyses occur in most global areas, but they are lower (r${\sim}$O.75) over the 20-3ON latitudes, northern America and southern Andes mountains. The first mode of MSU and reanalyses for monthly-mean Ch4 temperature shows annual cycle, and the lower-stratospheric warming due to volcanic eruptions. The analyses near the Korean peninsula show that lower-stratospheric temperature, out of phase with that for troposphere, increases in winter and decreases in summer. In the first mode for anomaly over the tropical Pacific, MSU and reanalyses indicate lower-stratospheric warming due to volcanic eruptions. In the second mode MSU and GEOS present Quasi-Biennial Oscillation (QBO) while NCEP, El Ni${\tilde{n}}$o. Volcanic eruption and QBO have more impact on lower-stratospheric thermal state than El Ni${\tilde{n}}$o. The EOF over the tropical Atlantic is similar to that over the Pacific, except a negligible effect of El Ni${\tilde{n}}$o. This study suggests that intercomparison of satellite data with model reanalyses may estimate relative accuracy of both data.

• Journal of Radiation Protection and Research
• /
• v.40 no.3
• /
• pp.174-180
• /
• 2015

There are currently many research papers on the knowledge, perceptions and actions of radiation-related staff, but hardly any papers on radiation major students in college who are to be staff members of radiation related jobs in the future. It is of course important to understand the perceptions of staff working on the lines and change their knowledge and perceptions, but in the long term it seems more efficient to understand those who are in the stage of being educated to be staff members-their knowledge and perception of radiation so that ultimately they can attain the right kind of understanding. Therefore the aim of this study is to grasp the pre-radiation staff's basic concept of radiation and space dose, their understanding of radiation safety based on this, and whether there is a change in their perception before and after the space dose measurement experiment; in the end this is to see if the space dose measurement experiment is effective in changing perception on radiation safety. This study took as its subject 64 students majoring radiation in college, I.e. pre-radiation staff members, and gauged their basic conceptualization of radiation, understanding of space dose, and understanding of radiation safety; in the X-ray room within the department the students were asked to measure space dose for themselves, so as to see whether there was a change in their understanding of radiation safety before and after the experiment, according to their understanding of the basic concept of radiation and of space dose. As a result of the space dose measurement experiment, students' increased basic knowledge of concept of radiation and understanding of the dangers of space dose were noteworthy, and accordingly their understanding of radiation safety became stricter and more conservative. In spite of this, their work ethic stayed in the lead of their understanding of radiation safety; this implies the need of a more departmentalized safety education program. Therefore instead of safety education that simply uses visual-audial material in a kind of lecture, I suggest here that there be a more experiential safety education program that enables learners to try out space dose measurement experiments for themselves, a work ethic education that aims for a conventional point of view towards radiation safety as well as a stern attitude.