• The Korean Journal of Pharmacology
• /
• v.30 no.3
• /
• pp.321-330
• /
• 1994

The protective effect of 'ischemic preconditioning (PC)' on ischemia-reperfusion injury of heart has been reported in various animal species, but without known mechanisms in detail. In an attempt to investigate the cardioprotective mechanism of PC, we examined the effects of PC on the myocardial oxidative injuries and the oxygen free radical production in the ischemia-reperfusion model of isolated Langendorff preparations of rat hearts. PC was performed with three episodes of 5 min ischemia and 5 min reperfusion before the induction of prolonged ischemia (30 min)-reperfusion(20 min). PC prevented the depression of cardiac function (left ventricular pressure x heart rate) observed in the ischemic-reperfused heart, and reduced the release of lactate dehydrogenase during the reperfusion period. On electron microscopic pictures, myocardial ultrastructures were relatively well preserved in PC hearts as compared with non-PC ischemic-reperfused hearts. In PC hearts, lipid peroxidation of myocardial tissue as estimated from malondialdehyde production was markedly reduced. PC did not affect the activity of xanthine oxidase which is a major source of oxygen radicals in the ischemic rat hearts, but the myocardial content of hypoxanthine (a substrate for xanthine oxidase) was much lower in PC hearts. It is suggested from these results that PC brings about significant myocardial protection in ischemic-reperfused heart and this effect may be related to the suppression of oxygen free radical reactions.

• The Korean Journal of Pharmacology
• /
• v.24 no.2
• /
• pp.221-232
• /
• 1988

Studies were conducted to determine whether reduced renal blood flow (RBF) exhibited by rats with uncontrolled, streptozotocin (STZ)-induced diabetes is attributable to diabetes-associated, enhanced renal vasoconstrictor influence of endogenous thromboxane $(TX)A_2$. Rats which were injected with STZ after pretreatment with 3-O-methyl glucose (3OMG), an agent which prevents STZ-induced hyperglycemia, were also studied. Basal values of total RBF (RBF; ml $min^{-1}$ $gKw^{-1}$; electromagnetic flow probe), systemic arterial pressure (BP; mm Hg) and renal vascular resistance (RVR;BP $RBF^{-1})$in pentobarbital-anesthetized rats during a control period were $5.9{\pm}0.3$(P<0.1_{VS}. CR), $115{\pm}3$ and $20.3{\pm}1.0$(P<0.1_{VS}. CR) for STZR (n=15), and $8.4{\pm}0.4$, $123{\pm}3$ and $15.1{\pm}0.8$ for age-matched control rats (CR; n= 15), respectively. Basal values of RBF, BP and RVR in 3OMG pretreated STZR were identical to CR. In preparations shown capable of renal vasodilatation, OKY 1581 (1 mg/kg, i.v. followed by 0.4 mg/kg min infusion) abolished arachidonate-induced $(TX)A_2$ synthesis, but did not alter basal BP, RBF or RVR in either STZR or CR (n=4/group). Similarly, i.r.a. infusion of SQ29548 (100 ng/ml RBF) abolished renal vasoconstriction induced by a TX/prostaglandin endoperoxide mimic, U46619, but had no discern able affect on RVR in either STZR (n=8) or CR (n=8). The data indicates that $TXA_2$ does not participate in the elevated basal RVR of STZR which are associated with the diabetic state.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.147-153
• /
• 2005

Purpose : We should use a computed tomography-simulator for the body measure and compensator manufacture process was practiced with TBI's positioning in process and to estimate the availability.,Materials and Methods : Patient took position that lied down. and got picture through computed tomography-simulator. This picture transmitted to Somavision and measured about body measure point on the picture. Measurement was done with skin, and used the image to use measure the image about lungs. We decided thickness of compensator through value that was measured by the image. Also, We decided and confirmed position of compensator through image. Finally, We measured dosage with TLD in the treatment department.,Results : About thickness at body measure point. we could find difference of $1{\sim}2$ cm relationship general measure and image measure. General measure and image measure of body length was seen difference of $3{\sim}4$ cm. Also, we could paint first drawing of compensator through the image. The value of dose measurement used TLD on head, neck, axilla, chest(lungs inclusion), knee region were measured by $92{\sim}98%$ and abdomen, pelvis, inquinal region, feet region were measured by $102{\sim}109%$.,Conclusion : It was useful for TBI's positioning to use an image of computed tomography-simulator in the process. There was not that is difference of body thickness measure point, but measure about length was achieved definitely. Like this, manufacture of various compensator that consider body density if use image is available. Positioning of compensator could be done exactly. and produce easily without shape of compensator is courted Positioning in the treatment department could shortened overall $15\{sim}20$ minute time. and reduce compensator manufacture time about 15 minutes.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.53-60
• /
• 2015

Purpose : The purpose of this study is to evaluate the usefulness of a 3D printed phantom for in-vivo dosimetry of a prostate cancer patient. Materials and Methods : The phantom is produced to equally describe prostate and rectum based on a 3D volume contour of an actual prostate cancer patient who is treated in Asan Medical Center by using a 3D printer (3D EDISON+, Lokit, Korea). CT(Computed tomography) images of phantom are aquired by computed tomography (Lightspeed CT, GE, USA). By using treatment planning system (Eclipse version 10.0, Varian, USA), treatment planning is established after volume of a prostate cancer patient is compared with volume of the phantom. MOSFET(Metal OXIDE Silicon Field Effect Transistor) is estimated to identify precision and is located in 4 measuring points (bladder, prostate, rectal anterior wall and rectal posterior wall) to analyzed treatment planning and measured value. Results : Prostate volume and rectum volume of prostate cancer patient represent 30.61 cc and 51.19 cc respectively. In case of a phantom, prostate volume and rectum volume represent 31.12 cc and 53.52 cc respectively. A variation of volume between a prostate cancer patient and a phantom is less than 3%. Precision of MOSFET represents less than 3%. It indicates linearity and correlation coefficient indicates from 0.99 ~ 1.00 depending on dose variation. Each accuracy of bladder, prostate, rectal anterior wall and rectal posterior wall represent 1.4%, 2.6%, 3.7% and 1.5% respectively. In- vivo dosimetry represents entirely less than 5% considering precision of MOSFET. Conclusion : By using a 3D printer, possibility of phantom production based on prostate is verified precision within 3%. effectiveness of In-vivo dosimetry is confirmed from a phantom which is produced by a 3D printer. In-vivo dosimetry is evaluated entirely less than 5% considering precision of MOSFET. Therefore, This study is confirmed the usefulness of a 3D printed phantom for in-vivo dosimetry of a prostate cancer patient. It is necessary to additional phantom production by a 3D printer and In-vivo dosimetry for other organs of patient.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.31-43
• /
• 2015

Purpose : Stereotactic body radiation therapy (SBRT) has proved its efficacy in several patient populations with primary and metastatic limited tumors. Because SBRT prescription is high dose level than Conventional radiation therapy. SBRT plan is necessary for effective Organ at risk (OAR) protection and sufficient Planning target volume (PTV) dose coverage. In particular, multi-target cases may result excessive doses to OAR and hot spot due to dose overlap. This study evaluate usefulness of Volumetric modulated arc therapy (VMAT) in dosimetric and technical considerations using Flattening filter free (FFF) beam. Materials and Methods : The treatment plans for five patients, being treated on TrueBeam STx(Varian$^{TM}$, USA) with VMAT using 10MV FFF beam and Standard conformal radiotherapy (CRT) using 15MV Flattening filter (FF) beam. PTV, liver, duodenum, bowel, spinal cord, esophagus, stomach dose were evaluated using the dose volume histogram(DVH). Conformity index(CI), homogeneity index(HI), Paddick's index(PCI) for the PTV was assessed. Total Monitor unit (MU) and beam on time was assessed. Results : Average value of CI, HI and PCI for PTV was $1.381{\pm}0.028$, $1.096{\pm}0.016$, $0.944{\pm}0.473$ in VMAT and $1.381{\pm}0.042$, $1.136{\pm}0.042$, $1.534{\pm}0.465$ in CRT respectively. OAR dose in CRT plans evaluated 1.8 times higher than VMAT. Total MU in VMAT evaluated 1.3 times increase than CRT. Average beam on time was 6.8 minute in VMAT and 21.3 minute in CRT. Conclusion : VMAT for SBRT in multi-target liver cancer using FFF beam is effective treatment techniqe in dosimetric and technical considerations. VMAT decrease intra-fraction error due to treatment time shortening using high dose rate of FFF beam.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.2
• /
• pp.25-31
• /
• 2019

Purpose: Metals induce metal artifact during CT-image for therapy planning, and it occurs images distortion, which affects the volumetric measurement and radiation calculation. In the case of using megavoltage computed tomography(MVCT), the volume of metals can be measured as similar to true volume due to minimal metal artifact outcome. In this study, radiation assessment was conducted by comparing teeth volume from images of kVCT and MVCT of head and neck cancer patients, then assigning to kVCT image to calculate radiation after obtaining the similar volume of true teeth volume from MVCT. Also, formal IR image was able to verify the accuracy of radiation calculation. Material and method: 5 head and neck cancer patients who had intensity-modulated radiation therapy from Radixact^® Series were of the subject in this study. Calculations of radiation when constraining true teeth volume out of kVCT image(A-CT) and when designated specific HU after teeth assigned using MVCT image were compared with formal IR image. Treatment planning was devised at the same constraints and mean dose was measured at the radiation assess points. The points were anterior of the teeth, between PTV and the teeth, the interior of PTV near the teeth, and the teeth where 5cm distance from PTV. Result: A difference of metals volume from kVCT and MVCT image was mean 3.49±2.61cc, maximum 7.43cc. PTV was limited to where the internal teeth were fully contained. The results of PTV dose evaluation showed that the average CI value of the kVCT treatment planning without the artifact correction was 0.86, and the average CI value of the kVCT with the artifact correction using MVCT image was 0.9. Conclusion: When the Treatment Planning was made without correction of metal artifacts, the dose of PTV was underestimated, indicating that dose uncertainty occurred. When the computerized treatment plan was made without correction of metal artifacts, the dose of PTV was underestimated, indicating that dose uncertainty occurred.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.2
• /
• pp.65-74
• /
• 2019

Purpose: Recently, A Catcher was added to prevent sagging in Radixact^® X9. In this study, We quantitatively compared general couch of Tomo-HDA^® with catcher couch of Radixact^® X9 using the human phantom and evaluated usefulness of catcher. Materials and methods: We used rando phantom for phantom study and set the each iso-center of head and neck region and Pelvis region for region parameter. Furthermore, We used hand made low melting point alloys for weight parameter. MVCT(Mega Voltage Computed Tomography) images were acquired for vertical error and rotation(pitch) error measurement increasing weight(A: 15kg, A+B: 30kg, A+B+C: 45kg). We selected 120 patients who has been treated using Tomotherpy machine for patient study. 60 patients has been treated in Tomo-HDA^® and the other 60 patients treated in Radixact^® X9. In the patient study methods, vertical error and rotation(pitch) error was measured for mean value calculation using MVCT images acquired on first day of radiation therapy. Result: Result of phantom study, Vertical error and rotation(pitch) error was increased proportionally increased as the weight increases in general couch of Tomo-HDA^®. each maximum value was 7.52mm, 0.38° in head and neck region and 11.94mm, 0.92° in pelvis region. However, We could confirm that there was stable error range(0.02~0.1mm, 0~0.04°) in Catcher couch of Radixact^®. Result of patient study, The head and neck region was measured 4.79mm 0.33° lower, and the pelvis region was measured 7.66mm, 0.22° lower in Catcher couch of Radixact^® X9. Conclusion: In this study, Vertical error and rotation(pitch) error was proportionally increased as the weight increases in general couch of Tomo-HDA^®. Especially, The pelvis region error was more increased than the head and neck region error. However, Vertical error and rotation(pitch) error was regularly generated regardless of weight or regions in Catcher^TM couch of Radixact^® X9 that this study's purpose. In conclusion, Catcher^TM couch of Radixact^® X9 can minimize mechanical error that couch sagging. Furthermore, The pelvis region is more efficiency than head and neck region. In radiation therapy using Tomotherapy machine, it is regarded that may contribute to minimizing unadjusted pitch error due to characters of Tomotherapy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.186-196
• /
• 2018

Junior colleges are higher education institutions that have played a major role in the economic development of Korea by providing the necessary human resources for its industrial development. Recently, however, they have experienced difficulties due to the reduction in the number of students. Therefore, it is time for junior colleges as a representative higher vocational education institution to change their role in this rapidly changing environment, and adopt a survival strategy through mutual cooperation and competition. The purpose of this study was to analyze the current state of the national health universities, to investigate the policy changes adopted by colleges and universities, and to utilize the results as data. This study analyzed the current status of health science colleges nationwide and investigated the policy changes as well as the directions presented to the colleges, in order to use the results as the basic data to promote the diversification of the class periods and degree programs. This study surveyed 636 professors from health sciences departments and industry workers from May 1 to May 30, 2017. 70.7% of the respondents supported the transition of the existing three-year systems of the health science departments to four-year systems. The reason for this is that it is possible to strengthen the field practice and personality education of the students by having a sufficient number of class periods, and to provide them with an equal educational background. The most anticipated effect of the transition to a four-year system is to improve the social status of medical personnel and to improve the educational environment of the colleges/universities. Moreover, the universities, associations of medical personnel and Ministry of Education are expected to play a leading role in the transition to the four-year system. Based on the results of this study, it was concluded that a more systematic and advanced vocational education system for the training of professional healthcare workers is needed in the upcoming fourth Industrial Revolution era. Also, this transition is expected to actively foster the education of advanced health care workers thanks to the diversification of the degree programs through the adjustment of the class periods which can be completed by general university (4-year) graduates.

• Journal of Sasang Constitutional Medicine
• /
• v.11 no.1
• /
• pp.241-252
• /
• 1999

1. Purpose and Method : We have many difficulty of using the existing medical Hurbs based on the theory of Em-Yang and the five elements, this is why we still do not explain the Sasang Constitutional medical Hurb Classification and do not have the Sasang Constitutional Pharmacology exactly, so we easily enter into a dispute and confusion. So through literary consideration about Acorus gramineus Soland. I try to objectify Sasang Constitutional Classification of Acorus gramineus Soland and the spirit of using Acorus gramineus Soland and common property of Sasang Constitutional Medical Hurb and try to find out a clue that search the effect of other Sasang Constitutional Medical Hurb. 2. Result : Qi(氣) and mi(味) of Acorus gramineus Soland have aroma and hot taste and have won Qi(溫氣), the using portion of Acorus gramineus Soland is root as medical Hurb. So Acorus gramineus Soland rise from Goonghacho(中下焦) to Sangcho(上焦) and divied impurity and purity and able to remove the turbidity Qi(氣)Ack(液) Acorus gramineus Soland have the effect of progressing the involution of Paeqi(肺氣) and divided impurity and purity of Qi(氣) and ack(液) and improve the fuction and structure of Tae-Em-ln. I think that the method of literay consideration on objectification of Sasang Constitution Pharmacology is of great value.

• The Korean Journal of Mycology
• /
• v.25 no.4 s.83
• /
• pp.311-319
• /
• 1997

These studies were carried out to develop an artificial cultivation method. The diameter and thickness of pileus ranged $1.5{\sim}7.0\;cm$ and $0.8{\sim}3.0\;cm$, respectively. The diameters of stipe were $1.2{\sim}2.5\;cm$ and the lengthes were $4.5{\sim}9.0\;cm$. The spore fingerprint was white. The sizes were spore $10.8{\sim}12.2{\times}4.35{\sim}5.65\;{\mu}m$, basidia $50.0{\sim}59.2{\times}7.4{\sim}7.8\;{\mu}m$, nalsistidia $21.75{\sim}28.7{\times}4.8{\sim}6.1\;{\mu}m$, pileus hymenium cell $50.6{\sim}66.0{\times}4.4{\sim}6.7\;{\mu}m$, and stipe hymenium cell $28.6{\sim}33.0{\times}5.5{\sim}6.6\;{\mu}m$. The thirty percent mixture of rice and wheat bran into sawdust gives the high density of mycelia and the good development of fruiting structure. The optimum water contents of sawdust substrates were $60{\sim}65%$ in which condition the mycelium grows well and gives high density. In PP bottle cultivation, the first fruiting period was $6{\sim}8$ days earlier in nonscratching samples than scratching ones, but the quantity of fruiting body was higher in scratching samples than nonscratching ones. In the case of PP bag cultivation, the first fruiting was 10 days faster, and the quantity of fruiting bodies was 30% higher in samples with 30% wheat bran than those with rice bran. The fleshiness of stipe was $2{\sim}3$ times harder than that of pileus.