• Journal of the Korean Electrochemical Society
• /
• v.9 no.3
• /
• pp.107-112
• /
• 2006

Si-C composites were prepared by the carbonization of silicon powder covered by polyaniline(PAn). Physical and electrochemical properties of the Si-C composites were characterized by the particle size analysis, X-ray diffraction technique, scanning electron microscope, and electrochemical test of battery. The average particle size of the Si was increased by the coating of PAn and somewhat reduced by the carbonization to give silicone-carbon composites. XRD analysis' results were confirmed co-existence of crystalline silicon and amorphous-like carbon. SEM photos showed that the silicon particle were well covered with carbonacious materials depend on the PAn content. Si-C|Li cells were fabricated using the Si-C composites and were tested using the galvanostatic charge-discharge test. Si-C|Li cells gave better electrochemical properties than that of Si|Li cell. Si-C|Li cell using the Si-C from HCl undoped PAn Precursor showed better electrochemical properties than that from HCl doped PAn Precursor. Using the electrolyte containing FEC as an additive, the initial discharge capacity was increased. After that the galvanostatic charge-discharge test with the GISOC(gradual increasing of the state of charge) condition was carried out. Si-C(Si:PAn:50:50 wt. ratio)|Li cell showed 414 mAh/g of the reversible specific capacity, 75.7% of IIE(initial intercalation efficiency), 35.4 mAh/g of IICs(surface irreversible specific capacity).

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.88-93
• /
• 2005

Anode-supported solid oxide fuel cell (SOFC) was investigated to increase the cell power density at intermediate temperature through control of the cathode structure. The anode-supported SOFC cell were fabricated by wet process, in which the electrolyte of $8mol\%\;Y_2O_3-stabilized\;ZrO_2 (YSZ)$ was coated on the surface of anode support of Ni/YSA and then the cathode was coated. The cathode has two- or three- layered structure composed of $(La_{0.85}Sr_{0.15})_{0.9}MnO_{3-x}(LSM),\;LSM/YS$ composite (LY), and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3{LSCF)$ with different thickness. Their single cells with different cathode structures were characterized by measuring the cell performance and ac impedance in the temperature range of 600 to $800^{\circ}C$ in humidified hydrogen with $3\%$ water and air. The cell with $LY\;9{\mu}m/LSM\;9{\mu}m/LSCF\;17{\mu}m$ showed best performance of $590mW/cm^2$, which was attributed to low polarization resistance due to LY and to low interfacial resistance due to LSCF.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.7
• /
• pp.1075-1081
• /
• 2013

Twitter, Facebook, and KakaoStory are the major SNS in Korea. Social knowledge production is being produced by those services from numerous collaboration and co-participation in those SNS. Wikipedia or Naver JishikIN service was regarded as the representative product of collective knowledge production during the wired internet era. However now at the wireless internet era centered with smart phones, various forms of collective knowledge production would be achieved by connecting to SNS in real-time. In this thesis, the survey data of collective knowledge production for users of three SNS have been compared and analyzed. The difference of the collective knowledge production mechanism among Twitter, Facebook and KakaoStory has been studied and compared through three variables: the motivation of collective knowledge production, the preference of collective knowledge production model, and collective knowledge production cultural perception. As a result of the analysis of the discriminant factors for three SNS user groups, it turns out that the diversity-toward usage motivation, personal contribution motivation, and collective knowledge production tendency perception are the most influential variables. This thesis is of significance in that it unites the value of social science such as social capital and collective knowledge production from the viewpoint of computer science and opens the new chapter of collective knowledge production with the real-time SNS of wireless internet from the wired internet.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1439-1445
• /
• 2010

In this study, we investigated the inhibition of phyto-extract mixture (PEM) in several digestive enzymes ($\alpha$-amylase, $\alpha$-glucosidase and lipase) for anti-obesity. The current study also examined the effects of PEM on adiposity and serum lipid levels in obese mice fed with high fat diet. ICR male mice weighing $33{\pm}1.1\;g$ were randomly divided into three groups, one normal diet group (control, ND group) and two high fat diet groups with or without PEM supplement (HFD group and PEM group). The mice were fed the PEM experimental for 6 weeks and then they were sacrificed. The results showed that the final weight, weight gain, food efficiency ratio and body fat were decreased by the addition of PEM compared to those of HFD group. White adipose tissue weights of epididymal, mesenteric and retroperitoneal areas in the PEM group were reduced to 31.2%, 8.8%, and 37.8%, respectively, compared to the HFD group. The levels of serum triglyceride, total cholesterol, LDL-cholesterol in the PEM group were significantly lower than those of HFD group. The body weight gain and food efficiency ratio of PEM group were significantly lower compared with those of HFD group. From the above results, the PEM may be effective material for anti-obesity through reducing serum triglyceride and body fats as well as decreasing body weight.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.447-453
• /
• 2004

In the case of a capsule that can acquire and transmit images from the intestines, the size of the module and the battery capacity in the capsule are subject to restriction. The capsule must be swallowable and the battery must maintain the stable power during the capsule travels in the gastrointestinal tract. Therefore, it is important to control the endoscope using bi-directional wireless communication. In this study, encoder and decoder CPLD modules for bi-directional capsule endoscopes were designed and implemented. The designed controller for capsule endoscope can transmit the images of GI-track from inside to outside of the body and the capsules can be controlled by external controller simultaneously. The designed and implemented controller was verified by an in-vivo animal experiments. From these experiments, it was verified that the CPLD module for bi-directional capsule endoscope satisfied the design specifications.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.471-478
• /
• 2004

Electromyogram (EMC) signal generated by voluntary contraction of muscles is often used in a rehabilitation devices such as an upper limb prosthesis because of its distinct output characteristics compared to other bio-signals. This paper proposes an EMG-based human-computer interface (HCI) for the control of the above-elbow prosthesis or the wheelchair. To control such rehabilitation devices, user generates four commands by combining voluntary contraction of two different muscles such as levator scapulae muscles and flexor-extensor carpi ulnaris muscles. The muscle contraction is detected by comparing the mean absolute value of the EMG signal with a preset threshold value. However. since the time difference in muscle firing can occur when the patient tries simultaneous co-contraction of two muscles, it is difficult to determine whether the patient's intention is co-contraction. Hence, the use of the comparison method using a single threshold value is not feasible for recognizing such co-contraction motion. Here, we propose a novel method using double threshold values composed of a primary threshold and an auxiliary threshold. Using the double threshold method, the co-contraction state is easily detected, and diverse interface commands can be used for the EMG-based HCI. The experimental results with real-time EMG processing showed that the double threshold method is feasible for the EMG-based HCI to control the myoelectric prosthetic hand and the powered wheelchair.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.379-384
• /
• 2012

Bitter gourd (Momordica charantia L.) has long been used for food and medicinal plant in Korea, China and Japan. This study aimed at evaluating productivity, and vitamin-C and charantin contents in bitter gourd (Momordica charantia L.) accessions. The contents of charantin of these two accessions were analyzed using HPLC with the UV-diode array detection. The highest fruit yield was observed in accessions, 'BG1' and 'BG7.' The vitamin-C contents of fruits in these two high-yield bitter gourd accessions, 'BG1' and 'BG7,' depended on days after fruit set and were highest in 24 days and 17 days after fruit set, respectively. The charantin contents of the two accessions were different according to the number of days after fruit set. The charantin content of 'BG1' was highest in fruits harvested at 24 days and followed by 15 days after fruit set. The charantin content of 'BG7' was highest in fruits harvested at 13 days and followed by 16 and 19 days after fruit set. The charantin contents of 13 M. charantia accessions with relatively high yield potential were analyzed and three accessions, 104615, K169995 and NS454, were selected based on their relatively high yield and charantin content. These accessions will be used for breeding program and processed foods.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.927-935
• /
• 2019

Screw-failure accidents in small ships frequently occur in coastal waters. In particular, vessels' propulsion systems are frequently coiled due to objects such as fish-nets and ropes that float on the sea. The failure of the ship's propulsion system can cause primary accidents such as ship operation delays and drifting due to loss of power; furthermore, the possibility of secondary accidents such as those involving operators in the underwater removal of rope stuck in a propeller. Ships that do not have the proper tools to solve these problems must be either lifted onto land to be repaired or divers must dive directly under the ship to solve the problem. Accordingly, some small vessels have been equipped with rope-cutter devices on the propeller shaft to prevent ship propeller system accidents in recent years; however, they are not being applied efficiently due to the cost and time of installation. To solve these problems, this study develops an underwater rope-cutter device and controller for the removal of propeller and shaft foreign material in small vessels. This device has simple structures that use the principle of a saw. Meteor gears and crank pins were used for the straight-line rotation of saw blades of the underwater rope-cutters to allow for long strokes. Furthermore, the underwater rope-cutting machines can be operated by being connected to the ship battery. The user, a non-professional, can ensure convenience and stability by applying reverse current prevention and a speed control circuit so that it can be used more conveniently and safely.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.827-833
• /
• 2019

There are several factors to consider for a ship to enter or depart a port safely. It is particularly important to identify the tides in the port to reduce the risk of stranding the ship. Most previous studies have focused on finding and analyzing harmonic constants. However, the research on the analysis and accuracy of harmonic constants in other hydrographic agencies is lacking. In this study, six Korean ports (Incheon, Gunsan, Yeosu, Busan, Ulsan, and Sokcho) were compared to the British and Korean tide tables based on actual information. To find the cause of tidal difference, the tide height, tide time, and form factor were calculated using harmonic constants. The information was then compared with British and Korean data. As a result of the difference in analysis of actual information and tide tables, there was a difference between the actual tide height and time at each port. The cause was found to be the difference in the harmonic constant, tide, and form factor between the UK and Korea. Therefore, this study, the Korean standard port should be added to the British tide table, and harmonic constants, which are the criteria for creating tides, must be constantly updated with the latest information. Additionally, the tide tables produced in each country are more accurate than the tide tables produced in UK.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.165-173
• /
• 2008

One of the most important requirements for reinforced concrete constructions is the bond behavior between concrete and reinforcement. For practical application, it is very important to study bond behavior of reinforcing bars in recycled aggregate concrete (RAC). Thirty six pull-out tests were carried out in order to investigate the bond behaviour between recycled coarse aggregate concrete (RCAC) and deformed bars. RCA replacement ratios (i.e., 0%, 30%, 60% and 100%) and positions of deformed bar (i.e., vertical and horizontal position) were considered as variables in this paper. Each specimen was in the form of a cube, with edges of 150 mm in length and for the pull-out tests, a deformed bar, 13 mm in diameter, was embedded in the center of each specimen. Based on the test results, the bond strength between the RCAC and deformed bars were influenced by both RCA replacement ratios and positions of deformed bars. It was found that under the equivalent mix proportion (i.e., the mix proportions are the same, except for different RCA replacement ratios), the bond strength between the RCAC and the ribbed bar has no obvious relation with the RCA replacement ratio, whereas the positions of deformed bars have a significant effect on the bond behavior between the RCAC and deformed bars. Under the condition of same RCA replacement ratio, the specimen of horizontal reinforcement at upper position (HU type) appear considerably low bond stress.