• Food Science of Animal Resources
• /
• v.24 no.2
• /
• pp.115-120
• /
• 2004

This study was carried out to investigate the effect of the scalding temperature at slaughtering process on meat quality and storage properties of chicken. The yellowness (b$\^$*/ value) of skin decreased at high scalding temperature (65-67$^{\circ}C$) and WHC (water holding capacity) increased from 67.04％ at low temperature (53-55$^{\circ}C$) to 69.26％ at high temperature. WBS (Warner-Bratzler Shear force) significantly increased from 1.70kg/0.5inch$^2$ to 2.54kg/0.5inch$^2$ as the scalding temperature increased (p＜0.05). TBARS (Thiobarbituric Acid-Reactive Substance) values were 0.25mgMA/kg at low temperature, 0.24mgMA/kg at middle temperature (59-61$^{\circ}C$) and 0.27mgMA/kg on 3 days of storage. Total aerobic counts (TPC) were 4.99 logCFU/mL at low temperature, 4.88 10gCFU/mL at middle temperature and 4.05 logCFU/mL. Although TPC was decreased as the scalding temperature increased. The detection rate of feather at carcass inspection was low as the scalding temperature increased and the detection rate of large feather (＞lcm) was not significantly different between middle temperature and high temperature. Exposed flesh was severe as the scalding temperature increased. In conclusion, meat color and physical properties of chicken were acceptable when the carcasses were scalded at low temperature, but they were microbiologically susceptible and uneasy to remove the feather. The yellowness (b$\^$*/ value) of skin decreased at high scalding temperature, and total aerobic counts (TPC) were decreased as the scalding temperature increased, and easy to remove the feather.

• Composites Research
• /
• v.28 no.6
• /
• pp.333-339
• /
• 2015

Electromagnetic interference shielding composite with low density ($1.18g/cm^3$) was fabricated using electroless plated FeCo magnetic metal hollow fibers and ethylene propylene diene monomer (EPDM) polymer. Aspect ratio of the fibers were controlled and their hollow structure was obtained by heat treatment process. The FeCo hollow fibers were then mixed with EPDM to manufacture the composite. The higher aspect ratio of the magnetic metal hollow fibers resulted in high electromagnetic interference shielding effectiveness (30 dB) of the composite due to its low sheet resistance (30 ohm/sq). The enhanced electromagnetic interference shielding effectiveness was mainly attributed to the formation of conducting network over the percolation threshold by high aspect ratio of fibers as well as an increase of the reflection loss by impedance mismatch owing to low sheet resistance, absorption loss, and multiple internal reflections loss.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1655-1665
• /
• 2014

Dynamic displacements of structures shows general behavior of structures. Generally, It is used to estimate structure condition and trustworthy physical quantity directly. Especially, measuring vertical displacement which is affected by moving load is very important part to find or identify a problem of bridge in advance. However directly measuring vertical displacement of the bridge is difficult because of test conditions and restriction of measuring equipment. In this study, Artificial Neural Network (ANN) is used to suggest estimation method of bridge displacement to overcome constrain conditions, restriction and so on. Horizontal strain and vertical displacement which are measured by appling random moving load on the bridge are applied for learning and verification of ANN. Measured horizontal strain is used to learn ANN to estimate vertical displacement of the bridge. Numerical analysis is used to acquire learning data for axis strain and vertical displacement for applying ANN. Moving load scenario which is made by vehicle type and vehicle distance time using Pearson Type III distribution is applied to analysis modeling to reflect real traffic situation. Estimated vertical displacement in respect of horizontal strain according to learning result using ANN is compared with vertical displacement of experiment and it presents vertical displacement of experiment well.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.729-738
• /
• 2017

With the signing of the Paris Agreement, which is the new climate change agreement at the end of 2015, it will have a great impact on Korea environmental policy. The construction industry, which accounts for 42% of Korea's total $CO_2$ emissions, has been implementing various policies to improve the environmental problems. However, it is only applying passively to other projects except eco-friendly building certification. This is because most of the eco-related systems are based on building facilities. Therefore, there is a need for a new eco - friendly design evaluation model that can be widely applied not only to architecture but also to civil engineering facilities. In this study, a new model is developed based on the existing VE model, which adds new factors to evaluate the environmental friendliness, potential environmental pollution concept and environmental risk of facilities. This model is an eco-friendly design evaluation model that enables decision makers to effectively select alternative environmental criteria at the design stage. As a result of the case analysis of the block retaining wall and the alternative retaining wall, the value of the eco - friendly value of the alternative was 1.026 times higher than the original one. If this model is used at the design stage, it is expected to contribute not only to the construction of environmentally friendly facilities but also to the reduction of carbon emissions.

• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.2
• /
• pp.88-95
• /
• 2007

Purpose: The purpose of this study was to compare the proapoptotic effects of matrix metal-loproteinase inhibitor (MMPI) and doxorubicin on wild-type p53 osteosarcoma cell line, socalled U2OS cell line. Materials and Methods: U2OS cells were treated with MMP inhibitor III (MMPI III) and doxorubicin, either respectively or simultaneously. In cells treated with doxorubicin, Fas-neutralizing antibody so called ZB4 was additionally treated to examine whether the doxorubicin played a role through the Fas/FasL pathway. Cells were analysed regarding to apoptosis and cell death by flow cytometry. Results: U2OS cells incubated with doxorubicin showed significant amount of cell death in dose-dependent manner. However, those incubated with MMPI III mostly remained viable state. In addition, there is no relationship between two drugs. Cells treated with doxorubicin and ZB4 at the same time did not show down regulation of apoptosis through inhibition of Fas/FasL pathway. Conclusion: It is important to re-examine MMP inhibitor's effect on other osteosarcoma cell line with wild-type p14 as well as wild-type p53 to evaluate its proapoptotic effect.

• Korean Journal of Clinical Pharmacy
• /
• v.10 no.1
• /
• pp.13-18
• /
• 2000

The bioequivalence of two clarithromycin tablets, the $Klaricid^{TM}$ (Ciba-Geigy Korea Ltd.) and the $Pylocin^{TM}$ (Kyungdong Pharmaceutical Co., Ltd.), was evaluated according to the Korean Guidelines for Bioequivalence Test (KGBT 1998). Sixteen healthy male volunteers ($20\sim26$ years old) were randomly divided into two groups and a randomized $2\times2$ cross-over study was employed. After one tablet containing 250 mg of clarithromycin was orally administered, blood sample was taken at predetermined time intervals, and the concentrations of clarithromycin in serum were determined using high-performance liquid chromatographic method with electrochemical detector. The pharmaco-kinetic parameters (area under the concentration-time curve: $AUC_t$, maximum concentration; $C_{max}$ and time to maximum concentration; $T_{max}$) were calculated and analysis of variance (ANOVA) was utilized for the statistical analysis of parameters. The results showed that the differences in $AUC_t,\;C_{max}\;and\;T_{max}$ between two tablets based on $Klaricid^{TM}$ tablet were $-0.22\%,\;-0.48\%\;and\;-1.63\%$, respectively. The powers $(1-\beta)\;for\;AUC_t,\;C_{max}\;and\;T_{max}\;were\;99.07\%,\;88.15\%\;and\;99.99\%$, respectively. Detectable differences $(\Delta)\;and\;90\%$ confidence intervals ($\alpha$=0.10) were all less than $\pm20\%$ All the parameters above met the criteria of KGBT 1998, indicating that $Pylocin^{TM}$ tablet is bioequivalent to $Klaricid^{TM}$ tablet.

• Research in Community and Public Health Nursing
• /
• v.16 no.4
• /
• pp.498-507
• /
• 2005

Purpose: The purpose of this study is to survey health requirements of middle-aged women and their families and to provide guidelines for developing nursing interventions by describing the process of family health maintenance experienced by middle-aged women and its conceptual system. Methods: To get saturated data, each of four researchers conducted two or three times of in-depth interview with eight middle-aged women aged between 40-64 years old and living in Seoul and Chuncheon from the 10th to the 30th of October 2004 and each interview was continued one or two hours. The Grounded theory adopted by Strauss & Corbin (1998) is a substantive theory that can explain the experiencing process of middle-aged women. Results: We found that the casual condition of family health maintaining by middle-aged women was 'confidence of health belief', and 'pouring by body moving' was found to be its phenomenon. A textual condition that might respond to the phenomenon was 'fatal roles acceptance', and intervening conditions that promote their family health were 'retracing' and 'gathering health information'. These intervening conditions impacted middle-aged women's confidence in family health and led them to take actions/interactions such as 'being a model of health', 'adapting to circumstances', 'do-it-myself', 'taking-care' 'harmonious mind' and 'the pursuit of cleanness'. These actions/interactions produced results such as 'being stronger', 'being unmanageable' and 'being fruitful'. Conclusions: Health confidence and practical health behaviors were observed in the process that the middle-aged female participants experienced unmanageable circumstances but they accepted their roles and responsibilities and recognized that they must be get stronger. The behaviors of health-together-with were divided into enthusiastic type, adaptation type and self-sacrificing type. Therefore middle-aged woman with the understanding of family health maintaining process as well as the theoretical system and practical principals needs to implement the intervention in acceptable level of family health process of preventing psychological and physical problems.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.923-930
• /
• 2005

This paper was to evaluate the high strength lightweight self-compacting concrete(HLSCC) manufactured by Nan-Su, which main factor, Packing Factor(PF) for mixing design, has been modified and improved. We have examined HLSCC performance at its fresh condition as well as its mechanical properties at the hardened condition. The evaluation of HLSCC fluidity has been conducted per the standard of second class rating of JSCE, by three categories of flowability(slump-flow), segregation resistance ability(time required to reach 500mm of slump-flow and time required to flow through V-funnel) and filling ability(U-box test) of fresh concrete. The compressive strength of HLSSC at 28 days has come out to more than 30MPa in all mixes. The relationship between the compressive strength-splitting tensile strength and compressive strength-modulus of elasticity of HLSSC were similar those of typical lightweight concrete. Compressive strength and dry density of HLSCC at 28 days from the multiple regression analysis resulted as $f_c=-0.16LC-0.008LS+50.05(R=0.83)\;and\;f_d=-3.598LC-2.244LS+2,310(R=0.99)$, respectively.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.420-429
• /
• 2002

The amount of $CO_2$-silicate bonded waste foundry sand(WFS) occurred in Korea is over 800,000 ton per year. WFS, as a by-product, is generated through manufacturing process of foundry may affect our environmental contamination, The reason is that WFS has been buried itself not less than 90％ out of total WFS. So, it can give damage on the ground of contamination in soil and underwater. Therefore, it is necessary to establish the method recycling WFS because of being intensified waste management law. In this study, we performed the research with respect to harmful component analysis, the qualities of WFS mortar and concrete mixed with WFS. As the results the specific gravity of WFS is the same as that of natural aggregate while unit weight and percentage of solids of WFS are smaller than those of it. But it is found that WFS can be used by substituting WFS for natural aggregate after control of poor grade of WFS. The flowability of mortar and concrete with WFS is inferior to those of natural aggregate, and the setting time of concrete with WFS is faster than that with only natural aggregate, On the contrary, the bleeding of concrete with WFS is shown good result, and compressive and tensile strength of concrete substituted WFS for 30％ are higher than those with only natural aggregate regardless of elapsed time.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.597-607
• /
• 2002

Electric arc furnace and converter slag are produced by about 6 millions tons in Korea at 2000 year. But compared with blast furnace slag, those are utilized only in unvalued material like landfill and road construction. There are unstable materials, like free CaO, in electric arc furnace and converter slag at steel-manufacturing process. This might cause volume expansion in concrete, if electric arc furnace and converter slag aggregates were used in concrete. This expansion may reach to crack or collapse of concrete. It is therefore settled by standard specification for concrete that electric arc furnace and converter slag aggregates have not to use in concrete. First of all, volume stability and stabilized process should be solved in electric arc furnace and converter slag aggregate to use in concrete. In this study, 6 types of aging are evaluated for effects of stabilization to reduce the expansion of electric arc furnace and converter slag. h converter slag aggregate, these types of aging are not good for volume stability for concrete aggregate, and even if converter slag aggregate is treated with aging, concrete with it has some problems that strength is reduced with curing days. But in electric arc furnace slag aggregate treated with hotwater and steam aging, the expansion of electric arc furnace slag aggregate is reduced about two times than that of converter slag aggregate, and electric arc furnace slag aggregate concrete has good results in strength compared with control concrete using crushed stone.