• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.575-585
• /
• 2000

Mass and elemental dry deposition fluxes and ambient particle size distributions were measured using dry deposition plates, a cascade impactor. and a CPS(Coarse Particle Sampler), from July to November 1998 in Seoul. Korea. Primarily anthropogenic elemental fluxes (Cu, Mn, Ni, Pb, Zn) were on average one to two orders of magnitude lower than primarily crustal elements (Al, Ca). Complete total and elemental particle size distributions showed trimodal size distributions due to the peak in particles larger than $10{\mu}m$ in diameter. A multi-step model and the Sehmel-Hodgson model were used to calculate total and cumulative deposition fluxes. The result indicated that dry deposition fluxes were extremely sensitive to the mass of particles larger than $10{\mu}m$ in diameter due to their high dry deposition velocities. The result showed that particles larger than $10{\mu}m$ in diameter dominated atmospheric dry deposition. The modeled fluxes calculated using the measured atmospheric particle size distributions and modeled deposition velocities were compared to measured ones. In general, the measured mass and elemental fluxes agreed well with the modeled ones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.222-227
• /
• 2020

Pb(Zr,Ti)O₃(denoted as PZT) in the perovskite phase is used as a dielectric, piezoelectric, and super appetizer material owing to its ferroelectric properties. A PZT film was formed by an RF magnetron sputtering process by preparing a target composed of Pb_1.3(Zr_0.52Ti_0.48)O₃. The PZT film was formed by dividing the material into a mono-layer PZT produced continuously with the same sputtering power and a bi-layer PZT produced with two-stage sputtering power. The bi-layer PZT consisted of a lower layer produced under low-power sputtering conditions and an upper layer produced under the same conditions as the mono-layer PZT. XRD revealed small amounts of pyrochlore phase in the mono-layer PZT, but only the perovskite phase was detected in the bi-layer PZT. SEM and AFM revealed the upper part of the bi-layer PZT to be more compact and smooth. Moreover, the bi-layered PZT showed superior symmetry polarization and a significantly reduced leakage current of less than 1×10-5 A/cm². This phenomenon observed in bi-layer PZT was attributed to the induction of growth into a pure perovskite phase by suppressing the formation of a pyrochlore phase in the upper PZT layer where the densely formed lower PZT layer was produced sequentially.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.400-409
• /
• 2016

The geospatial information industry has the advantage of being able to converge with other industries to create new value. Therefore, efforts are underway to promote the growth of this dwindling national industry by endorsing policies and initiatives to promote its convergence with other industries. In this study, feedback was collected from experts in various fields through three rounds of polls using the Delphi method. The poll results were used to investigate the causes of hindrance to the growth of the geospatial information industry and to build a comprehensive solution to this problem. As a result, 27 strategies were constructed based on the users' requirements related to policy, data and service, including the demands for establishing public polling methods, enhancing data quality and advertisement. Since the coefficient of variance fell between 0.11 and 0.20 in the importance evaluation, an amicable consensus was reached between the experts. Considering that the convergence of industries is achieved through the integration of various types of technology and information, it is important to consider the requirements of users in different industries. In this respect, the results of this study will serve as a useful base for constructing mid-to-long term road maps to promote the development of the geospatial information industry.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.801-809
• /
• 2012

Long-term measurement of total mercury (TM) and dissolved gaseous mercury (DGM) were performed in Yangsuri marsh. Average TM and DGM concentrations were $2.0{\pm}2.0$ ng/L and $15.0{\pm}2.8$ pg/L, respectively, indicating that only 2.6% of TM existed as the form of DGM in Yangsuri marsh. While TM did not show the seasonal variation a statistically high DGM concentration was observed in warm season, indicating that DGM was effectively produced by strong solar radiation and high water temperature. There was no relationship between TM and DGM concentrations in Yangsuri marsh, as observed in other studies. DGM in Yangsuri marsh was supersaturated for most of sampling period; therefore, one can conclude that $Hg^0$ in water surface can readily volatilize to the atmosphere.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.5
• /
• pp.382-391
• /
• 2009

Atmospheric speciated mercury concentrations including total gaseous mercury (TGM) and reactive gaseous mercury (RGM) were measured in Chuncheon from March 2006 to November 2008. Average concentrations were 2.10 ${\pm}$ 1.50 ng/$m^3$ and 3.00 ${\pm}$ 3.14 pg/$m^3$ for TGM and RGM, respectively. RGM concentrations were higher during daytime than nighttime probably because of high photochemical activities. We found that RGM concentration considerably increased as ozone increased when fog occurred, indicating that ozone was the important oxidant for $Hg^0$ in aqueous phase. TGM concentration showed positive correlations with CO and $PM_{10}$ which can transport in long-range, but there was no correlation with $NO_2$. Considering that major source of mercury is combustion process, this result showed that local sources did not significantly impact on TGM concentration in Chuncheon. Five-day backward trajectories were calculated for the samples representing high and low concentrations of TGM, and determined that industrialized area of China including Shenyang and Beijing influenced TGM concentrations in Chuncheon.

• Communications for Statistical Applications and Methods
• /
• v.16 no.3
• /
• pp.449-461
• /
• 2009

Higher sigma quality level is generally perceived by customers as improved performance by assigning a correspondingly higher satisfaction score. The process capability indices and the sigma level $Z_{st}$ ave been widely used in six sigma industries to assess process performance. Most evaluations on process capability indices focus on statistical estimation under normal process which may result in unreliable assessments of process performance. In this paper, we consider statistical estimation for bivariate VPCI(Vector-valued Process Capability Index) $C_{pkl}=(C_{pklx},\;C_{pklx})$ under Marshall and Olkin (1967)'s bivariate exponential process. First, we derive some limiting distribution for statistical inference of bivariate VPCI $C_{pkl}$. And we propose two asymptotic normal confidence regions for bivariate VPCI $C_{pkl}$. The proposed method may be very useful under bivariate exponential process. A numerical result based on our proposed method shows to be more reliable.

• The Korean Journal of Zoology
• /
• v.32 no.3
• /
• pp.275-280
• /
• 1989

Present study examined the endogenous release of luteinizing hormone releasing hormone (LHRH) from superiused hypothalamic sBces derived from Korean native cattie (KNC). In addition, the in vitro secretory pattern of LHRH release in '(NC was compared with that in imported cattle such as Holstein cow. The median eminences (ME) of hypothalamic tissues were disseded out, sliced and quici'ly placed in ice-cold superfilsion chamber. Superhision chambers containing ME slices were maintained in a constant temperature water-bath at 37$^{\circ}C$. Effluents were colleded on ice at 10 min intervals for a 4 hr superfusion period, and kept -2$0^{\circ}C$ prior to LHRH radloimmunoassay. LHRH release was analyzed by the PULSAR algorithm. The spontaneous release of LHRH from both cows was episodic during a 4 hr superhision period. The mean LHRH release, pulse amplitude and pulse interval m KNC were 11.08 $\pm$ 1.50 pg/min/mg x 10-$^2$, 21.43 1 7.28 pg/mg x 10-$^2$, and 39.42 $\pm$ 3.08 min, which were quite similar to those observed in Holstein cows. The basic charaderistics of the LHRH pulse generator of '(NC appears important for a better understanding about the endocrine function of KNC.

• The Korean Journal of Mycology
• /
• v.22 no.2
• /
• pp.190-195
• /
• 1994

Studies were conducted to determine the potential of sodium hypochlorite(SHC) on the control of bacterial yellow blotch in cultivated oyster mushroom, Pleurotus ostreatus. SHC at the concentration of 80 ppm was effective on the control of Pseudomonas agarici causing yellow blotch in oyster mushroom except number 916 isolate. In vitro the mycelial growth was slightly inhibited at the concentration higher than 100 ppm of sodium hypochlorite, but retardation of the mycelial growth was soon recovered. Spray of SHC solution at the concentration of 40-50 ppm per day significantly reduced the incidence of the yellow blotch without impairing the growth of oyster mushroom in field culture. However, the higher concentration of SHC(67 ppm) induced yellow brown or dark gray in color and deformed cap and elongated stripe in morphology of fruiting body. Results indicate that periodical spray of sodium hypochlorite seems to be the recommendable method for protection against bacterial yellow blotch disease in oyster mushroom without reducing food quality.

• Korean Journal of Optics and Photonics
• /
• v.31 no.5
• /
• pp.223-230
• /
• 2020

In this paper, we have studied the characteristics of stimulated Brillouin scattering (SBS) and mode instability (MI) in a ytterbium-doped polarization-maintaining fiber laser with master oscillator power amplifier configuration. We measured the laser output power and back-reflection spectrum for a variety of ytterbium-doped fibers and seed lights, to investigate the power-scaling limits of fiber lasers. By optimizing the laser structure, we demonstrated an all-fiber high-power polarization-maintaining fiber laser with near-diffraction-limited beam quality. The output power of 1.5 kW was achieved with a linewidth of 10 GHz, generated by pseudo-random binary sequence (PRBS) phase modulation. The beam quality M² was about 1.15 at the maximum output power. The polarization extinction ratio (PER) was greater than 17 dB.

• Journal of Periodontal and Implant Science
• /
• v.31 no.1
• /
• pp.207-227
• /
• 2001

스프린트는 치주처지료에서 부가적 처치법으로 널리 사용되고 있으며, 한편, 디지털 공제 활영술은 기존방사선촬영술의 한계점을 극복하기 위해 기발된 새로운 방법이다. 이번 연구에서는 치근활택술 단독시행시와 스피린트 병행 처치시의 효과를 임상적, 방사선학적으로 비교하였다. 중정도의 성인성 치주염을 가진 20명의 환자를 대상으로 하되 10명은 치근활택술 단독으로, 나머지 10명은 스프린트 병행처치로 처치하였다. 임상적, 방사선학적인 평가는 처치전, 처치후 6개월에 행하고, 임상적 평가의 경우 3개월에 추가로 실시하였다. 이번 연구에서 사용된 임상 지수로는 치태지수, 치은지수, 치은퇴축, 치주낭깊이, 임상부착수준, 임상부착증가, 탐침시출혈, 치아동요도 등이며, 방사선학적 평가는 기존 방사선촬영술에 의한 방법과 디지털 공제촬영수렝 의한 방법으로 행하였다. 디지털 공제 촬영술에 의한 평가시, 영상은 Digora 프로그램에 의해 획득하고 Emago 프로그램으로 처리 하여 다음과 같은 결론을 얻었다. 1. 처치후 3개월에 치태지수, 치은지수, 치은퇴축, 치주낭깊이, 임상적부착수준, 탐침시 출혈 등의 임상지수들이 변했으며, 특히 이러한 변화는 치주낭깊이, 치은퇴축, 탐침시출혈에서 유의성이 있었다. ( p<0.05 ) 그러나 두군간 차이는 인정되지 않았다. ( p>0.05 ) 2. 처치후 6개월에도 치태지수, 치은지수, 치은퇴축, 치주낭깊이, 임상적부착수준, 탐침시출혈, 치아동요도 등의 임상지수들이 변했으며, 특히 이러한 변화는 치주낭깊이, 치은퇴축, 탐침시출혈, 치태지수, 치아동요도에서 유의성이 있었다. ( p<0.05 ) 그러나 두 군간 차이는 인정되지 않았다. ( p>0.05 ) 3. 켄달 상관분석시, 임상적 평가와 기존 방사선 촬영술에 의한 평가사이의 관련성을 낮았으며 거의 0에 가까운 수치를 보였으며 (r=0.110, p=0.639 ) 임상적 평가와 디지털 공제 방사선 촬영술에 의한 평가사이에서 약간 높은 관련성을 보였다. ( r=0.257, p=0.315 ) 즉 치주치료후의 골변화는 디지털 공제 방사선 촬영술에 의한 평가시 기존 방사선 사진보다 임상적 부착증가와 더욱 긴밀한 관련성을 보여준다. 이상의 결과로 볼 때, 스프린팅 처치는 치주 치료에 있어 치근활택술에 부가적 표과를 제공하지 못한다.