• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.708-716
• /
• 1989

The purpose of this study is to investigate the breakup mechanism of a liquid jet in a coaxial air flow. By using the high speed camera, measured were the instantaneous change of the wave length, amuplitude of disturbance, propagation velocity of wave and breakup length, and the relationships between those data were examined. The shape of the surface of the liquid jet appeared to be rather complicated and irregular. The growth rate of disturbance was not constant, and was changed at the moment of 3ms prior to the disintegration of the liquid jet. Simultaneously at this moment, the propagation velocities of the sequential waves were reversed and the wave length was rapidly decreased.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.42-47
• /
• 1992

본 연구에서는 공극관의 실험인자에 대한 특성을 알아보기 위하여 공극관에 입사되는 음파의 파수 k와 공극분포부분들 사이의 거리인 a의 곱으로 나타나는 무차원변수 ka와, 공극관의 단면적에 대한 전체 공극면적의 비로 정의한 공극률을 실험인자로 하여 연구를 진행하였다. 또한 sulivan의 모델을 이용하여 공극관을 모델링하고 이를 컴퓨터를 사용하여 모의 실험을 한 후 실험결과와 비교하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.11
• /
• pp.1055-1063
• /
• 2012

Fluctuating wall pressures were measured using an array of 16 piezoelectric transducers beneath a turbulent boundary layer. The coating used in this experiment was an open-cell, urethane-type foam with a porosity of approximately 50 ppi. The ultimate objective of the coating is to provide a mechanical filter to reduce the wall pressure fluctuations. The boundary layer on the flat plate was measured by using a hot wire probe, and the CPM method was used to determine the skin friction coefficient. The wall pressure autospectra and streamwise wavenumber-frequency spectra were compared to assess the attenuation of the wall pressure field by the coating. The coating is shown to attenuate the convective wall pressure energy. However, the relatively rough surface of the coating in this investigation resulted in a higher mean wall shear stress, thicker boundary layer, and higher low-frequency wall pressure spectral levels compared to a smooth wall.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.334-339
• /
• 1995

COSINE 급수를 이용한 유한 길이 원통형 셀의 유체 영향계수에 대한 해석결과를 양단 단순지지 조건(Simply-supported condition)을 갖는 해석모델에서 이용한 SINE 급수를 적용한 해석 결과와 비교, 검토한 결과 유사한 경향을 보이고 있으며, 무차원 파수 ka 값이 커질수록 Reactance는 0으로 접근하고 Resistance는 .rho.c 값으로 접근하는 경향을 가지고 있어 타당한 해석방법임을 알 수 있었다. 따라서 양단에 끝막이 판을 갖고 있는 원통형 셀에 대한 음압복사 현상을 해석하는데 COSINE 급수를 이용하는 것이 가능함을 본 연구를 통하여 확인하였다. 또한 본 연구에서 유도한 Z$_{mm}$값을 이용하면 양단에 끝막이 판을 갖고 있는 원통형 셀에서의 유체 효과를 용이하게 해석할 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.62-72
• /
• 1995

The acoustic characteristics of perforated tube muffler are studied in terms of non-dimensional wavenumber ka and admittance-ratio AZ. This study includes not only the case of perforated tubes having uniform hole distribution along the length but also the case of having non-uniform hole distributions. The acoustic hole impedance and transmission loss of perforated tube of which has various hole distributions were measured. The experimental results demonstrated that the transmission loss of perforated tube is a function of non-dimensional wave number ka and admittance-ratio AZ. The transmission loss of perforated tube muffler is predicted by the numerical method which is based on Sullivans and compared with the experimental ones.