• Journal of Convergence for Information Technology
• /
• v.11 no.4
• /
• pp.26-34
• /
• 2021

In the era of the Fourth Industrial Revolution, the future battlefield will carry out multi-area operations with hyper-connected, high-speed and mobile systems. In order to prepare for changes in the future, the Korean military intends to develop various weapons systems and form a multi-layer tactical network to support On The Move communication. However, current tactical networks are limited in support of On The Move communications. In other words, the operation of multi-beam antennas is necessary to efficiently construct a multi-layer tactical network in future warfare. Therefore, in this paper, we look at the need for multi-beam antennas through the operational scenario of a multi-layer tactical network. In addition, based on development consideration factors, features of rotary-wing and fixed-wing aircraft, we present the location and operation of airborne relay drone installations of multi-beam antennas.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.752-761
• /
• 2014

With increasing of interest in quad-rotor which has excellent maneuverability recently, a various types of multi-rotor aircraft was developed and commercialized, and there are many kinds of leisure products to be easily operated. In these products, the AR.Drone manufactured by Parrot has an advantage that it is easily operated by user due to the its internal stabilization loop in the on-board computer. Thus it is possible to design the unmanned UAV system easily by using this AR.Drone and its inner loop for the stabilization. For this advantage, KARI(Korea Aerospace Research Institute) has been developing the indoor swarming flight system by using multiple AR.Drones. For this indoor swarming flight, it is necessary that not only the position controller for each AR.Drone, but also the collision avoidance algorithm. Therefore, in this paper, the collision avoidance controller is provided for the swarm flight by using these AR.Drones.

• Journal of the KSME
• /
• v.46 no.2 s.303
• /
• pp.40-46
• /
• 2006

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.130-136
• /
• 2002

In this paper, a flight test method is described for the system identification of the unmanned aerial vehicle equipped with an automatic flight control system. Multistep inputs are applied for both longitudinal mode and lateral/directional excitation. Optimal time step for excitation is sought to provide the broad input bandwidth. A programmed mode flight test method provides high-quality flight data for system identification using the flight control computer with the longitudinal and lateral/directional autopilot which enables the separation of each motion during the flight test. In addition, exact actuating input that is almost equivalent to the designed one guarantees the highest input frequency attainable. Several repetitive flight tests were implemented in the calm air in order to extract the consistent system model for the air vehicle. The enhanced airborne data acquisition system endowed the high-quality flight data for the system identification. The flight data were effectively used to the system identification of the unmanned aerial vehicle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.26-33
• /
• 2005

Smart UAV, which adopting tiltrotor aircraft concept, requires vertical take-off and landing, long endurance and high speed capability. These contradictable flight performances are hard to meet unless the operation of flap system which should reveal optimal performance for each flight mode. In order to design SUAV flaperon satisfying the three performance requirements, various configurations are generated and their aerodynamic performances are analyzed using numerical flow computations around flap systems. Considering aerodynamic performance and structural simplicity, a final flap configuration is selected and the performance is validated through the wind tunnel testing for 40% scale model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.401-410
• /
• 2020

In this study, a real-time Tactical UAS position compensation system based on image information developed to compensate for the weakness of location navigation information during GPS signal interference and jamming / spoofing attack is described. The Tactical UAS (KUS-FT) is capable of automatic flight by switching the mode from GPS/INS integrated navigation to DR/AHRS when GPS signal is lost. However, in the case of location navigation, errors accumulate over time due to dead reckoning (DR) using airspeed and azimuth which causes problems such as UAS positioning and data link antenna tracking. To minimize the accumulation of position error, based on the target data of specific region through image sensor, we developed a system that calculates the position using the UAS attitude, EO/IR (Electric Optic/Infra-Red) azimuth and elevation and numerical map data and corrects the calculated position in real-time. In addition, function and performance of the image information based real-time UAS position compensation system has been verified by ground test using GPS simulator and flight test in DR mode.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.17-20
• /
• 2010

An aerial target system is used for the purpose of experimental test and fire training of missile that newly developed and in mass production. Since the target drones of aerial target systems are monopolized by several major countries so that they are selling at a high price. In this paper, we present the CFD simulation results on a new target drone that Kyungan co. ltd is developing with their own technologies. The presented CFD simulation was conducted in the same conditions of a wind tunnel tests and we could obtain the simulation results of the lift and drag values were in errors by less than 15 percent compared to the experiment. The simulation results were used to determine the modified shapes of new prototype target drone that could fly safely.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.521-526
• /
• 2014

현대에 이르러 초경량 무인 비행기에 대한 많은 연구가 진행되고 있다. 이러한 비행체는 저레이놀즈수 영역에서 사용되는 특성으로 인해, 경계층 내에서 박리현상과 난류영역으로의 천이 등과 같은 여러 복합적인 현상을 발생시킴으로써 비행체의 공력특성에 큰 영향을 미친다. Bumpy Airfoil은 저레이놀즈수 유동에서의 이와 같은 문제를 해결하기 위해 제안된 익형이다. 따라서 본 논문은 전산열유체해석 프로그램인 EDISON_전산열유체를 이용하여 Bumpy Airfoil 형상에 대한 공력특성을 연구하였고, 발생하는 양항비를 원 익형과 비교하였다. 비압축성 조건 내에서, 공력 성능 향상을 위한 Bumpy Airfoil의 형상 변수로 Bump 개수와 높이를 선정하여 받음각에 따른 유동장을 분석하고 양항비를 수치해석 및 고찰하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.251-252
• /
• 2012

본 논문에서는 UAV(Unmanned Aerial Vehicle)을 이용하여 목표물을 찾고 목표물의 위치가 멀거나 목표물이 이동 시에도 기지국까지 지속적인 통신 연결을 제공하기 위해 UAV 집단을 제어하는 방안을 제안한다. 기존의 통신 시설을 이용할 수 없으며, UAV들 간에만 무선 랜 통신이 가능한 전시상황이나 특수 재난 상황에서 사용되는 것을 가정하였다. 제안 방안은 UAV들이 탐색지역 내에 목표물을 찾은 후에 목표물에 대한 정보를 기지국까지 전달하기 위하여 UAV들을 이동시킨다. 목표물이 먼 곳에 위치할 시에는 UAV들이 기지국까지의 통신 연결을 주기적이라도 유지하기 위해 UAV가 다른 UAV의 통신 범위까지 이동하여 정보를 전달하고 원래 위치로 복귀하는 방안과, 목표물이 이동할 때 목표물을 추적하며 기지국과의 연결성을 유지하는 방안을 제안한다. 이와 같은 과정들은 NS-2를 사용한 모의실험을 통하여 제안되는 기법을 검증하고 성능을 평가한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.06a
• /
• pp.173-174
• /
• 2018

배경제거는 영상에서 움직이는 객체를 분리할 때 유용한 방법이며, 대표적인 예인 Mixture of Gaussian (MOG) 알고리즘은 픽셀 당 3-5 가우스 모델을 혼합해 배경과 움직이는 객체를 구분한다. 소형 표적을 추적하기 위해서는 화소 혹은 작은 블록 단위로 시/공간적 밝기 변화량을 이용하는 옵티컬 플로우 기법이 적절하다. 본 논문에서는 소형 표적의 강인한 객체 추적을 위해 MOG2와 옵티컬 플로우의 결합 방법을 소개한다. 제안된 방법은 MOG2를 사용하여 전경 영역을 획득하고 전경 영역에만 옵티컬 플로우를 적용한다. 실험 결과는 제안 방법이 잡음과 배경의 미세 변화가 있더라도 무인 비행체를 잘 추적할 수 있음을 보여준다.