• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.553-562
• /
• 2017

GPS (Global Positioning System) receiver among various sensors mounted on UAV (Unmanned Aerial Vehicle) helps to perform various functions such as hovering flight and waypoint flight based on GPS signals. GPS receiver can be used in an environment where GPS signals are smoothly received. However, recently, the use of UAV has been diversifying into various fields such as facility monitoring, delivery service and leisure as UAV's application field has been expended. For this reason, GPS signals may be interrupted by UAV's flight in a shadow area where the GPS signal is limited. Multipath can also include various noises in the signal, while flying in dense areas such as high-rise buildings. In this study, we used analytical photogrammetry and auto tracking total station technique for 3D positioning of UAV. The analytical photogrammetry is based on the bundle adjustment using the collinearity equations, which is the geometric principle of the center projection. The auto tracking total station technique is based on the principle of tracking the 360 degree prism target in units of seconds or less. In both techniques, the target used for positioning the UAV is mounted on top of the UAV and there is a geometric separation in the x, y and z directions between the targets. Data were acquired at different speeds of 0.86m/s, 1.5m/s and 2.4m/s to verify the flight speed of the UAV. Accuracy was evaluated by geometric separation of the target. As a result, there was an error from 1mm to 12.9cm in the x and y directions of the UAV flight. In the z direction with relatively small movement, approximately 7cm error occurred regardless of the flight speed.

• Journal of Digital Contents Society
• /
• v.18 no.6
• /
• pp.1041-1047
• /
• 2017

There are many methods for surveying the status of a road, and the use of unmanned aerial vehicle (UAV) photo is one such method. When the UAV images are too large to be processed and suspected to be redundant, a texture extraction technique is used to transform the data into a reduced set of feature representations. This is an important task in 3D simulation using UAV images because a huge amount of data can be inputted. This paper presents a texture extraction method from UAV images to obtain high-resolution images of bridges. The proposed method is in three steps: firstly, we use the 3D bridge model from the V-World database; secondly, textures are extracted from oriented UAV images; and finally, the extracted textures from each image are blended. The result of our study can be used to update V-World textures to a high-resolution image.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.510-516
• /
• 2021

Recently, the range of utilization and demand for unmanned aerial vehicle (UAV) has been continuously increasing, and research on the construction of a separate operating system for low-altitude UAV is underway through the development of a management system separate from manned aircraft. Since low-altitude UAVs also fly in the airspace, it is essential to establish technical standards and certification systems necessary for the operation of the aircraft, and research on this is also in progress. If the operating standards and certification requirements of the aircraft are presented, a test method to confirm this should also be presented. In particular, the accuracy of small UAV's navigation required during flight is required to be more precise than that of a manned aircraft or a large UAV. It was necessary to calculate a separate navigation error. In this study, we presented a test method for deriving navigation errors that can be applied to UAVs that have difficulty in acquiring long-term operational data, which is different from existing manned aircraft, and conducted verification tests.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.5
• /
• pp.737-750
• /
• 2022

The demands of Unmanned Aerial Vehicles (UAVs) are growing very rapidly with the era of the 4th industrial revolution. As the technology of the UAV improved with the development of artificial intelligence and semiconductor technology, it began to be used in various civilian fields such as hobbies, bridge inspections, etc from being used for special purposes such as military use. MAVLink (Macro Air Vehicle Link), which started as an open source project, is the most widely used communication protocol between UAV and ground control station. However, MAVLink does not include any security features such as encryption/decryption mechanism, so it is vulnerable to various security threats. Therefore, in this study, the block cipher is implemented in UAV to ensure confidentiality, and the results of the encryption and decryption performance evaluation in the UAV according to various implementation methods are analyzed. In addition, we proposed the security requirements in accordance with Common Criteria, which is an international recognized ISO standard.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.141-149
• /
• 2018

This paper presents a neural network controller design for complex damage to a blended wing Unmanned Aerial Vehicle(UAV): partial loss of main wing and vertical tail. Longitudinal/lateral axis instability and the change of flight dynamics is investigated via numerical simulation. Based on this, neural network based adaptive controller combined with two types of feedback linearization are designed in order to compensate for the complex damage. Performance of two kinds of dynamic inversion controllers is analyzed against complex damage. According to the structure of the dynamic inversion controller, the performance difference is confirmed in normal situation and under damaged situation. Numerical simulation verifies that the instability from the complex damage of the UAV can be stabilized via the proposed adaptive controller.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.739-747
• /
• 2015

With rapid growth in the technologies and demand of Remotely Piloted Aircraft Systems (RPASs), integration of such systems into the existing airspace system is becoming an issue in many countries. RPAS have different flight performances, communication characteristics, separation assurance mechanisms, and human machine interfaces from manned aircraft. To establish rules and regulations for RPAS integration, it is important to understand the impacts of RPASs on the airspace system. A simulation system that integrates manned aircraft, air traffic control, and RPASs is developed in Inha University to investigate these impacts through Human-in-The-Loop (HiTL) simulations. Three conflict resolution scenarios between a manned aircraft and a Remotely Piloted Aircraft (RPA) were constructed and tested. Human factors such as the response times of pilots and controllers were measured and analyzed as well as the risk of each maneuver.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.408-414
• /
• 2019

We developed a surveillance tool for collision avoidance of unmanned aerial vehicles (UAVs) in urban areas. In our tool, users can visualize the safety distance on the actual 3D map of urban area. The estimated positions of UAVs are assumed to be obtained based on the long-term evolution (LTE) signals. The safety distance is defined to include two or more signals with bias. The safety distance calculation method used in this paper enables simulation similar to the actual urban areas where signals are frequently biased due to multipath. In the simulation, the parameters were set based on the measured values, and the change of the safety distance according to the number of faulty signals was simulated. As a result, increasing the number of faulty signals led to a longer safety distance as expected.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.10
• /
• pp.893-901
• /
• 2014

UAS and related technology have been mainly developed for military use but, in recent years, various types of civil UAS have been using in a variety of applications. For example, there are multicopters to shoot aerial photography, pesticide spraying unmanned helicopter, and in addition there are radio control (R/C) aircraft to be used for hobbyists. UAV has spread rapidly enough that permitted experts as well as the public can use it but the related safety regulations are not properly equipped. We investigated the status of domestic and international UAS certification system and airworthiness standards. And the trends in research for the development and modification of the certification system were studied in this paper. As a result, most countries have studied to develop the related regulations and especially ICAO has tried to develop RPAS manual, standards and recommended plans and modify the related ICAO annex through the research group, ICAO UASSG. Based on the manual and SARPs, authorities, related organizations and companies have prepared to develop and modify regulations in accordance with the actual situation of each country.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.530-536
• /
• 2018

Recently, many studies for interoperability of UAV in the NAS has been performed since the application range and demand of UAV are continuously increased. For the interoperation of UAV in the NAS, technical standards and certification system for UAV which is equivalent to the commercial aircraft are required and test and evaluation methodology must be presented by standards. In this paper, qualification test and evaluation methodology aboutfor the UAV navigation system is proposed. For the research, the mission profile and operation environment of UAV were analyzed. Thereafter the test criteria were derived and the test methodology were established. Finally, the simulation and demonstration using test-bed UAV were performed. As a result of the test, it was confirmed that the navigation system of test UAV has a position accuracy about 1.4 meters at 95% confidence level in the entire flight stage.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.5
• /
• pp.55-72
• /
• 2016

This study aims at providing a methodology for retaining international technology competitiveness, marketable industry, and sustainable promising technology in a field of new growth engine industry such as national unmanned aerial vehicle industry. We draw a result by analysing with tools such as KrKwic, Excel, NetMiner, presenting methods of a Social Network Analysis, sub-group analysis, and cognitive map analysis based on patent data in a field of unmanned aerial vehicle industry. As a result, some future promising technologies are prospected as what worths concentrated investment, such as 'pilot control tech', 'identification of friend or foe tech'.