• The Magazine of the IEIE
• /
• v.32 no.7 s.254
• /
• pp.47-56
• /
• 2005

본 기고문에서는 센서네트워크 기술 중에서 하드웨어 플랫폼과 운영체제에 대한 현황을 기술한다. 하드웨어 플랫폼 및 운영체제의 경우 시장 초기진입 단계이므로 연구 개발 중인 플랫폼보다는 상용화된 플랫폼들을 소개하는데 주력한다. 또한, 상용화된 플랫폼을 이용하여 ZigBee 통신 성능을 실험하고 분석하였다. 먼저 ZigBee의 최대 전송률을 실험하였으며 무선 UM과의 주파수 충돌시의 전송률을 실험하였다. 실험 결과, 칩수준에서의 최대 전송률은 250kbps라고 하나 실제 성능은 이보다 낮은 150kbps를 기록하였다. 무선LAN과의 충돌 시에는 10$\~$20$\%$ 정도의 성공률만을 보이며 실내에서 무선 LAN의 영향을 더욱 많이 받는다는 결과를 얻었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.388-390
• /
• 2005

거리에 제약을 받는 무선 LAN에 대비하여 최근에는 WiBro 통신망이 제시되고 있고, 앞으로는 이들 통신망이 공존할 것으로 예상된다. 이를 위해, 본 논문에서는 무선 LAN과 WiBro 통신망과의 연동 구조 핀 핸드오프 절차를 제시하였다. 또한, OPNET Modeler 9.0을 사용하여 제시된 핸드오프 절차를 구현하였으며, 핸드오프 시 TCP와 UDP에 대해 기능 테스트를 수행하였다. 테스트 결과 핸드오프가 일어나더라도 원활한 통신이 가능함을 보여주었다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.193-196
• /
• 2000

본 논문에서는 FG-CPW(Finite-Ground Coplanar Wave-Guide) 구조의 단일 평형 다이오드 믹서에 대해서 논의된다. 주파수 영역은 무선 LAN 대역으로 선택하였다. RF 신호는 5.725-5.875 GHz, LO 신호는 5.58GHz, 그리고 IF 신호는 140 MHz가 사용된다. 제시된 FG-CPW 구조의 LPF(low pass filter)는 회의크기를 줄일 수 있으며, 불필요한 하모닉 억제 특성이 우수하다. 5.635 GHz에서 5 dBm의 Power를 갖는 LO신호가 입력될 때 6.2 dB 의 혼합기의 변환손실을 얻는다. 또한 LO-RF isolation과 LO-IF isolation은 각각 30 dB $\Omega$dB 의 특성을 보인다. 이 혼합기는 CPW 구조가 일반적으로 알려진 밀리미터 대역에서의 장점뿐만 아니라 C-Band의 무선 LAN 분야에도 충분히 응용될 수 있으리라 기대된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.821-828
• /
• 2012

Recently, in order to provide the mobile multimedia service cost-effectively, the user's demand has been greatly increasing to use wireless LAN (WLAN). But existing WLAN (Wireless LAN) is vulnerable to attack of outside, as users are connecting AP using Open Authentication. In this article, we have designed and implemented WLAN Information Sharing System using social network service (SNS) which is efficiently managing. WLAN secure key. A proposed WLAN Information Sharing System model has been proposed in which the social trust strength between people is employed for WLAN access control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1613-1621
• /
• 2015

This paper analyzes the rate adaptation scheme and suggests applicable strategy of the MCS(Modulation and Coding Scheme) for improving DCF throughput in the IEEE 802.11ad and 802.11ad wireless LAN. IEEE 802.11ac and 802.11ad wireless LAN provide MCS technique that dynamically adjusts modulation level and code rate to the time-varying channel conditions in order to obtain considerably high data rates. But these standards did not provide rate adaptation algorithm, so this paper surveyes rate adaptation algorithm and suggests MCS scheme applied to IEEE 802.11ac and 802.11ad wireless LAN. Specially A MAC(Medium Access Control) layer throughput is evaluated over error-prone channel in the IEEE 802.11ac-based wireless LAN. In this evaluation, DCF (Distributed Coordination Function) protocol and A-MPDU (MAC Protocol Data Unit Aggregation) scheme are used. Using theoretical analysis method, the MAC saturation throughput is evaluated with the PER (Packet Error Rate) on the condition that the number of station, transmission probability, the number of parallel beams and the number of frames in each A-MPDU are variables.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.307-315
• /
• 2010

Although a substantial amount of studies have been carried out in order to improve the performance of IEEE 802.11, most of them focused on how to slowly decrease the Contention Window size, instead of resetting it to its initial value. Slow decreasing of the window size reduces the collision probability and increases the channel throughput. Therefore, it is difficult to achieve good results in a heterogeneous network which coexists with the original DCF. For instance, a Gentle DCF(GDCF) has good performance in a homogeneous environment, while it can hardly transmit frames in a heterogeneous environment including the original DCF. It is because the slow decreasing of the window size reduces the transmission probability. In this paper, we propose a Fast Recovery DCF(FRDCF) to solve this problem. In the FRDCF, the reset mechanism of the original DCF is maintained to keep the transmission probability high, while a new counter is used to enhance the performance of the wireless LAN. We prove that, compared with the GDCF, the FRDCF has better performance in a heterogeneous wireless LAN.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.6
• /
• pp.11-17
• /
• 2001

Design and implementation of the MAC protocol processor prototype for high speed wireless LAN, which has interface with 5GHz OFDM PHY layer, is presented. We analyze the IEEE 802.11 MAC protocol specification and then separate the MAC protocol functions to be implemented by hardware and firmware and define the interface in which frames can be exchanged. That is, it is considered that high speed queue processing and interfaces with RISC processor and OFDM PHY layer. Protocol control and transmission/reception functions of the MAC functions are implemented in hardware in order to guarantee high speed processing in MAC layer. The developed MAC hardware block operates at 10MHz main clock. Therefore, transmission rate in PHY layer is about 80Mbps because data transmission/reception between MAC layer and PHY layer is performed as unit of octet. The designed FPGA MAC function chip has been implemented in wireless LAN test board and it is verified that DCF function is operated correctly.

• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.481-487
• /
• 2008

Ship's wireless LAN was in the limelight as equipment of ease, cost reduction, various func tion al i ty. In the paper, a dual-bandpass filter for wireless LAN has proposed, which was designed by using dual-mode square loop resonator with square patch in compliance with 2.4 GHz and 5 GHz band of wireless LAN. The dual-bandpass filter could be designed by adjusting sizes of one perturbation element and three of reference elements in compliance with the frequency bands of 2.4 GHz and 5.8 GHz, Furthermore, new dual-bandpass filter was also designed by adjusting stopband of using open stubs in compliance with the frequency bands of 2.4 GHz and 5.2 GHz. The measured results for the fabricated dual-bandpass filters agreed well with the simulated ones, and hence, it was confirmed that the proposed design method is valid.

• The KIPS Transactions:PartC
• /
• v.11C no.2
• /
• pp.219-228
• /
• 2004

Wireless LAN(wireless Local Area Network) is constructed network environment by radio in indoors or outdoors environment and that to use electric wave or light instead of wire to client such as PC(Personal Computer), notebook, PDA in hub(Hub) in technological side. Now, among IEEE 802.11 WG(Working Group), there is TGf(Task Group F) that develop standard protocol between AP's(Access Point). In this group, proposed IAPP(Inter Access Point Protocol) to secure interoperability between AP producing in different manufacturer, this offers seamless connectivity between STA by sharing Security Context information or Layer 2 forwarding information between AP without passing through re-authentication process when STAs(Station) move by protocol to secure mobility between AP that differ in equal serve network. In this paper, I wish to suggest method that change avenue of communication of message to block information leakage that can occur at security message or WEP Key transmission between above AP, and uses public key to offer wireless area security little more.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.599-603
• /
• 2016

Recently the wireless LAN system is substituting wired LAN system notably as the number of mobile users increases greatly along the advancement of technology. But the wireless LAN has a critical weakness in the security such as data leakage. Thus a safe security system is imperative to avoid threatening from hackers with offering the best convenience to inner users. In this research, we have developed a RADIUS wireless LAN security system for industrial applications, which performs the EAP authentication with the compatibility for any maker of wireless LAN. The system has interfaces based on WEB, providing DB access function for user management so that users can perform authentication of 802.1x in their computers.