• The KIPS Transactions:PartC
• /
• v.16C no.5
• /
• pp.645-652
• /
• 2009

Location-based service providing the customized information or service according to the user's location has attracted a lot of attention from the mobile communication industry. The service is realized by means of several building blocks, a localization scheme, service platform, application and service. The localization scheme figures out a moving target's position through measuring and processing a wireless signal. In this paper, we propose an adaptive localization scheme in an indoor localization system based on IEEE 802.15.4 standard. In order to enhance the localization accuracy, the proposed scheme selects the best reference points and adaptively reflects the changes of propagation environments of a moving target to approximate distances between the target and the reference points in RSS(Received Signal Strength) based localization system using triangulation. Through the implementation of the localization system, we verify the performance of the proposed scheme in terms of the localization accuracy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.600-607
• /
• 2007

In this paper, we propose a MLKA (Multi-Level Keep-Alive) algorithm based on PRCG (Periodic In this paper, we propose a MLKA (Multi-Level Keep-Alive) algorithm based on PRCG (Periodic Ranging Code Group), in which periodic ranging codes are divided into groups. The AP (Access Point) performs this algorithm when a periodic ranging code arrives at the AP in a WiBro (Wireless Broadband Internet) system. In order to increase the traffic radio bandwidth resource efficiency in this system, we propose the multi-level keep-alive algorithm for finding abnormal AT (Access Terminal). From simulation results, it is verified our proposed MLKA algorithm based on PRCG can provide higher traffic radio resource efficiency compared to message-driven keep-alive algorithms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.927-934
• /
• 2019

Recently, mobile devices have evolved into small computers with various functions according to user requirements. Careful attention must be paid to the design of the power supply network for the stable operation of the application processor (AP), the wireless communication modem, the high performance camera, and the various interfaces of the mobile device to implement various functions of the mobile device. In this paper, we analyzed and verified the method of optimizing the design parameters such as the position, capacity, and number of decoupling capacitors to meet the target impedance required by the driver IC chip to ensure the stability of the power supply network of mobile devices that should be designed as wiring type due to mounting density limitation. The proposed wired power supply network design method can be applied to various applications including high-speed signal transmission line in addition to mobile applications.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.13-21
• /
• 2019

The restricted network or the unbalanced distribution of spectrum is causing the problems of lack of spectrum resources and deterioration of the service quality. In addition, the existing centralized radio sharing method has not been a fundamental solution for radio sharing and is inefficient in terms of cost, convenience, and security. In this paper, we propose a blockchain-based spectrum sharing as a low-cost, trustworthy, high-efficiency platform that can distribute and share spectrum resources, and propose policies to realize this. In the spectrum sharing platform, spectrum information about Wi-Fi AP and LTE mobile hotspot is registered in the blockchain, and spectrum sharers and users can conclude peer-to-peer spectrum sharing contract quickly and efficiently through smart contract. The pay for the shared spectrum resources and reward for spectrum quality management open platform ecosystem to activate the circulation-sharing and it can provide a convenient and efficient public wireless infrastructure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1890-1897
• /
• 2021

People counting is an important technology to provide application services such as smart home, smart building, smart car, etc. Due to the social distancing of COVID-19, the people counting technology attracted public attention. People counting system can be implemented in various ways such as camera, sensor, wireless, etc. according to service requirements. People counting system using WiFi AP uses WiFi CSI data that reflects multipath information. This technology is an effective solution implementing indoor with low cost. The conventional WiFi CSI-based people counting technologies have low accuracy that obstructs the high quality service. This paper proposes a deep learning people counting system based on WiFi CSI data. Data preprocessing using auto-encoder, data augmentation that transform WiFi CSI data, and a proposed deep learning model improve the accuracy of people counting. In the experimental result, the proposed approach shows 89.29% accuracy in 6 subjects.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.94-106
• /
• 2020

Recently, the radio navigation method utilizing the GPS(Global Positioning System) satellite information is widely used as the method to measure the position of objects. As GPS applications become wider and fields based on various positioning information emerge, new methods for achieving higher accuracy are required. In the case of autonomous vehicles, the INS(Inertial Navigation System) using the IMU(Inertial Measurement Unit), and the DR(Dead Reckoning) algorithm using the in-vehicle sensor, are used for the purpose of preventing degradation of accuracy of the GPS and to measure the position in the shadow area. However, these positioning methods have many elements of problems due not only to the existence of various shaded areas such as building areas that are continually enlarged, tunnels, underground parking lots and but also to the limitations of accumulation-based location estimation methods that increase in error over time. In this paper, an efficient positioning method in a large underground parking space using Fingerprint method is proposed by placing the AP(Access Points) and directional antennas in the form of four anchors using WLAN, a popular means of wireless communication, for positioning the vehicle in the GPS shadow area. The proposed method is proved to be able to produce unchanged positioning results even in an environment where parked vehicles are moved as time passes.

• The KIPS Transactions:PartD
• /
• v.19D no.3
• /
• pp.237-246
• /
• 2012

Although the development of Global Positioning System (GPS) are more and more mature, its accuracy is just acceptable for outdoor positioning, not positioning for the indoor of building and the underpass. For the positioning application area for the indoor of building and the underpass, GPS even cannot achieve that accuracy because of the construction materials while the requirement for accurate positioning in the indoor of building and the underpass, because a space, a person is necessary, may be very small space with several square meters in the indoor of building and the underpass. The Received Signal Strength (RSS) based localization is becoming a good choice especially for the indoor of building and the underpass scenarios where the WiFi signals of IEEE 802.11, Wireless LAN, are available in almost every indoor of building and the underpass. The fundamental requirement of such localization system is to estimate location from Access Point (AP) to mobile device using RSS at a specific location. The Multi-path fading effects in this process make RSS to fluctuate unpredictably, causing uncertainty in localization. To deal with this problem, the combination for the method of Neural Networks and Push-Pull Estimation is applied so that the carried along the devices can learn and make the decision of position using mobile device where it is in the indoor of building and the underpass.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.3-11
• /
• 2016

In the environment of Internet of Things (IoT), IoT devices are limited by physical components such as power supply and memory, and also limited to their network performance in bandwidth, wireless channel, throughput, payload, etc. Despite these limitations, resources of IoT devices are shared with other IoT devices. Especially, remote management of the information of devices and patients are very important for the IoT healthcare service, moreover, providing the interoperability between the healthcare device and healthcare platform is essential. To meet these requirements, format of the message and the expressions for the data information and data transmission need to comply with suitable international standards for the IoT environment. However, the ISO/IEEE 11073 PHD (Personal Healthcare Device) standards, the existing international standards for the transmission of health informatics, does not consider the IoT environment, and therefore it is difficult to be applied for the IoT healthcare service. For this matter, we have designed and implemented the IoT healthcare system by applying the oneM2M, standards for the Internet of Things, and ISO/IEEE 11073 DIM (Domain Information Model), standards for the transmission of health informatics. For the implementation, the OM2M platform, which is based on the oneM2M standards, has been used. To evaluate the efficiency of transfer syntaxes between the healthcare device and OM2M platform, we have implemented comparative performance evaluation between HTTP and CoAP, and also between XML and JSON by comparing the packet size and number of packets in one transaction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.742-749
• /
• 2009

In this paper, we propose mitigation techniques using time-domain shortening filter (TSF) and frequency-domain shortening filter (FSF) to overcome inter-block interference (IBn and inter-carrier interference (ICn due to the time difference of arrival (TDoA) and carrier frequency offset (CFO) between downlink and uplink signals from access point (AP) and subscriber station (SS) in synchronous digital duplexing (SDD)/orthogonal frequency division multiple access (OFDMA) systems for indoor wireless communication. The proposed TSF and FSF maximize SIR for shortening in time (SIRST) and SINR for shortening in frequency (SINRSF), respectively, by using channel impulse responses and timing information among stations, obtained from mutual ranging procedure. It is verified by computer simulation that the proposed TSF and FSF reduce effectively the effects of IBI and ICI in the SDD/OFDMA systems.

• Journal of Internet Computing and Services
• /
• v.20 no.5
• /
• pp.95-104
• /
• 2019

Various kinds of devices are used for the Internet of Things (IoT) service, and IoT devices mainly use communication technology that uses the frequency of the unlicensed band. There are several types of communication technology in the unlicensed band, but WiFi is most commonly used. Devices used for IoT services vary in computing resources from devices with limited capabilities to smartphones and provide services over wireless networks such as WiFi. Most IoT devices can't perform complex operations for network control, thus they choose a WiFi access point (AP) based on signal strength. This causes a decrease in IoT service efficiency. In this paper, an intelligent AP system that can efficiently control the WiFi connection of the IoT devices is implemented. Based on the network information measured by the IoT device, the access point learns using a feed forward neural network algorithm, and predicts a network connection state to control the WiFi connection. By controlling the WiFi connection at the AP, the service efficiency of the IoT device can be improved.