• Korean journal of applied entomology
• /
• v.29 no.3
• /
• pp.209-215
• /
• 1990

Some preliminary studies were conducted to find out whether the levee-burning could justifiable for the suppression of insect pests, particularly the smaller brown planthopper (Laodelphax striatellus F.). Density surveys on pests and their enemies (mostly spiders) were carried out upto the mid May at an experimental paddy field located in Suwon after of it's levee $(72\times1m)$ was burned on Feb. 20, 1987. Results were discussed in relation to density recovering of both pests and their possible enemies (spiders) and summarized as below. Not a single individual of any pest or enemy was found from the levee upto sometime after the levee-burning. Grasses started to grow more vigorously in burned ares than in unburned upto about 60 days after the burning. And densities of both pest and enemies grew higher in burned areas than in unburned from about 75 days after the burning (in Early may). It is suspected that all individuals of pests and enemies fond from the burned areas could have immigrated from the surrounding areas. If levee-burning was carried out in much wider areas, much longer time would be needed to recover the density of both pests and enemies to the center region of the burning. Wingless spiders would require even longer time than winged pest species to re-establish in the center region of the widely burned field. Pirata subpiraticus, the most abundant spider species in Korean paddy fields, starts to move about and searches for food at above $9^{\circ}C$ which is somewhat lower than the critical temperature for the pest species. Thus P. subpiraticus would require more food than other pest species early in the spring, and therefore, it would have lower probability to survive than pest species particularly in burned areas. Experiments for pest suppression with levee-burning would better be carried on in much wider areas, and its justification seems to be discussed after man other disciplines related to both pests and their natural enemies were throughly studied together with their density surveys. However, according to the present point of vie, the opinion that levee-burning is helpful for controlling pests which over winter on levee areas could not be justifiable.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.896-904
• /
• 2010

HACCP is a scientific and systematic program that identifies specific hazards and gives measurements in order to control them and ensure the safety of foods. Transportation of livestock and its products is one of the vulnerable sectors regarding food safety in Korea, as meats are transported by truck in the form of a carcass or packaged meat in a box. HACCP application and its acceleration of distribution, in particular transportation, are regarded as important to providing consumers with ultimately safe livestock products. To achieve this goal, practical tools for HACCP application should be developed. Supply chain management (SCM) is a holistic and strategic approach to demand, operations, procurement, and logistics process management. SCM has been beneficially applied to several industries, notably in vehicle manufacture and the retail trade. HACCP-based real-time visibility system using wireless application (WAP) of the livestock distribution is centralized management system that enables control of temperature and HACCP management in real-time for livestock transportation. Therefore, the application of HACCP to livestock distribution (transportation, storage, and sale) can be activated. Using this system, HACCP management can be made easier, and distribution of safe livestock products can be achieved.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.322-332
• /
• 2012

The objectives of this paper were to investigate home range, habitat selection, and threat factors of leopard cats (Prionailurus bengalensis) living in rural area of Korea. The results based on radio tracking of three leopard cats (two males and one female) can be summarized as follows. First, the average home range of leopard cats were $2.64{\pm}1.99km^2$ (Kernel 95) and $3.69{\pm}1.34km^2$ (MCP 100), and the average size of core areas was $0.64{\pm}0.47km^2$ (Kernel 50). The home range of a male leopard cat that radio-tracked in winter was the largest ($5.19km^2$, MCP 100). Second, the Johnson's habitat selection model based on the Jacobs index showed that leopard cats preferred meadows and paddy fields avoiding forest covers at the second level, whereas they preferred meadows adjacent to streams and avoided paddy fields at the third level. Finally, roadkill could be prime threat factor for the cat population. Therefore, habitats dominated by paddy fields, stream corridors with paved roads, and human settlements with insufficient forest patches could threaten the long-term viability of leopard cat populations. Thus the habitat managements for the leopard cat conservation should focus on the prevention of road-kill and the installation of wildlife passages in rural highways adjacent to stream corridors.

• Information Systems Review
• /
• v.14 no.1
• /
• pp.67-84
• /
• 2012

Recent increases in uncertainty and speed of market change are driving the adoption of new intelligent mobile office systems. Organizational information systems paradigm suggests that a right match between organizational characteristics and the use of technology is critical in producing desired results. Following such perspective this study developed the mobile office system case of Seoul Metropolitan Railway Transit(SMRT) in Korea. SMRT developed the mobile task-supporting environment that help the management of subway lines real-time without the restriction of time and space. They named the system as ST&F(SMRT Talk and Flash). They decided to develop the application systems in-houses they did not want to be overly dependent on external services in future changes and developments of the system. The new practice reduced the time for moving back and forth to 10% of their working time from previous 20%. The time used for paper works and administration chore also reduce to 10% of their working time from previous 30% on the average. The employees could use 80% of their time to concentrate on the completion of assigned task. The effects of this improvement resulted in the heightened efficiency of the use of human resources and the heightened level of railway safety. The case of SMRT shows that the mobile office system can be applied and extended to various business areas such as facility management and maintenance beyond such typical uses as sales and marketing support. Also, The result of case study will be a useful guideline on the construction and using of mobile office system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.32-40
• /
• 2016

IEEE 802.15.4 is the one of the protocols for radio communication in a personal area network. Because of low cost and low power communication for IoT communication, it requires the highest optimization level in the implementation. Recently, the studies of location aware algorithm based on IEEE802.15.4 standard has been achieved. Location estimation is performed basically in equal consideration of reference node information and blind node information. However, an error is not calculated in this algorithm despite the fact that the coordinates of the estimated location of the blind node include an error. In this paper, we enhanced a conventual maximum likelihood estimation using weighted coefficient and implement the hardwired location aware engine for small code size and low power consumption. On the field test using test-beds, the suggested hardware based location awareness method results better accuracy by 10 percents and reduces both calculation and memory access by 30 percents, which improves the systems power consumption.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.17-27
• /
• 2014

Numerical model became one of most important tools for identifying the state of an existing structure in accordance with development of numerical analysis techniques. A numerical model should be updated based on the measured responses from the existing structure to accurately use the model for identifying the state of the bridge and executing numerical experiments. In this study, a new model updating method based on repetition method without a differential function is introduced and applicability for high speed railway bridge is verified with dynamic stability analysis. A fine measurement based on measurement points roaming method was executed with an wireless measurement system for precise dynamic characteristic analysis. The natural frequencies and mode shapes were estimated by correlation analysis and a mode decomposition technique. An initial numerical model was constructed based on design drawings and the model have been updated in accordance with the introduced model updating method. The results from numerical experiment and field test have been compared for verifying the applicability of the model updating method. And the dynamic stability analysis has been executed to verify the usability of the updated numerical model and the model updating method. It seems that the model updating method can be used for various bridges after evaluation of applicability for other type bridges in further studies.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.59-63
• /
• 2005

가. 자율주행 트랙터가 작업하는 동안 작동상태를 효과적으로 모니터링하고 제어할 수 있도록 하기 위해 인터넷을 통한 자율주행 트랙터의 모니터링과 원격제어 기술에 대하여 시험 하였다. 나. 트랙터를 모니터링하고 제어하는 곳과 경작지가 있는 곳을 인터넷으로 연결하고, 운전자가 탑승하지 않은 트랙터는 인터넷을 통해 전달받은 명령을 수행하도록 액튜에이터를 제어하고 제어되는 상황을 경작지에 위치한 카메라가 촬영하여 인터넷을 통하여 원격지의 운전자 쪽으로 전송하도록 시스템을 구성했다. 다. HST 트랙터 조종장치로서 서보제어가 가능한 액튜에이터를 개발 장착하고 제어성능을 시험하였다. 전자유압제어(EHPS)식 조향액튜에이터는 , 조향가능각 100도의 전범위에 조향 제어가 가능했으며 전조향에 필요한 시간은 약 1.6초 정도 였다. 피스톤 펌프의 사판각을 제어하는 전후진 제어기는 리니어 모터 구동식으로 총 제어 변위 50mm를 이동하는데 제어시간이 약 1.2초 소요되었다. 엔진 회전수를 제어하기위한 스로틀 액튜에이터는 리니어 모터 구동식으로 제어변위 30mm에 대해 제어시간이 0.8초 소요되었다. 3점 링크에 부착된 작업기의 위치를 제어하는 리프트 제어기도 리니어모터로 구동하였으며 제어거리 40mm에 대해 제어시간 0.9초정도가 소요되었다 라. 제작된 HST 무인 트랙터를 인터넷과 무선통신 시스템을 이용하여 원격 모니터링과제어 가능성에 대해 시험 했다. 인터넷을 통한 장거리 원격제어 및 모니터링 시험에서 제어신호의 전달지연은 0.3 ${\sim}$ 0.5초정도로 제어신호의 피이드 백을 확인할 때까지는 약1초정도의 대기 시간이 필요한 것으로 나타나 모니터링 및 제어 시스템의 개발 시 이를 고려할 설계가 필요한 것으로 나타났다.된 표층수온 분포값보다 2005년 2월에 관측된 표층수온 분포값이 상대적으로 낮은 분포 특성을 나타내고 있었다. 따라서 인공위성자료를 이용한 황해의 2004년 해황 분석 결과는 이상수온 상승의 원인이 쿠로시오 해류의 변동과 관련성이 높다고 판단되며 이에 대한 지속적인 연구가 현재 진행중에 있다.에 인산염 처리, 여기에 초음파 처리, 마지막 단계로 3분 끓이면 억제율이 68%까지 억제되었다. 이는 단일처리시 전혀 억제를 못하는 처리를 단계별로 한 단계씩 더해가면 allergy 억제효과가 나타난다고 할 수 있겠다. 초음파 처리도 역시 저 allergy 처리 공정에 이용될 수 있는데 이것은 그 처리로 인해 새로운 알러젠이 생성될 수도 있다. 또한 복합처리로 allergy를 감소시키면 연속적이고 동시적으로 하기 때문에 원가를 절감할 수 있다.환경현안에 대한 정치경제적 접근을 외면하지 말고 교과서 저작의 소재로 삼을 수 있어야 하며, 이는 '환경관리주의'와 '녹색소비'에 머물러 있는 '환경 지식교육'과 실천을 한단계 진전시키는 작업으로 이어질 것이다. 이후 10년의 환경교육은 바로 '생태적 합리성'과 '환경정의'라는 두 '화두'에 터하여 세워져야 한다.배액에서 약해를 보였으나, 25% 야자지방산의 경우 50 ${\sim}$ 100배액 어디에서도 액해를 보이지 않았다. 별도로 적용한 시험에서, 토마토의 경우에도 25% 야자지방산 비누 50 ${\sim}$ 100배액 모두 약해를 발생하지 않았으나, 오이에서는 25% 야자지방산 비누 100배액에도 약해를 나타내었다. 12. 이상의 결과, 천연지방산을 이용하여 유기농업에 허용되는 각종의 살충비누를 제조할 수 있었으며, 방제가 조사결과 진딧물, 응애 등 껍질이 연약한

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.270-276
• /
• 2020

3D printing is an additive manufacturing technology that can produce complex shapes in a single process for a range of materials, such as polymers, ceramics, and metals. Recent 3D printing technology has developed to a level that enables the mass-production through an improvement of the printing speed and the continuous development of applicable materials. In this study, 3D printing technology using a laser was applied to manufacture a heat exchanger for an air compressor in a railway vehicle. First, the optimal design of the heat exchanger was carried out by focusing on weight reduction and compactness as a shape suitable for 3D printing. Based on the design derived, heat exchanger prototypes were made of AlSi10Mg alloy material by applying the SLM technique. Moreover, the manufactured prototypes were attached to an existing air compressor, and the heat exchange performance of the compressed air was tested. The test results of the 3D printed prototypes showed a heat exchange performance of approximately 80% and 85% at low and high-pressure, respectively, compared to the existing heat exchanger. From the 𝓔-NTU method results with an external cooling air condition similar to that of the existing heat exchanger, the calculated heat transfer amount of 3D printed parts showed similar performance compared to the existing heat exchanger. As a result, the 3D printed heat exchanger is lightweight with good performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7292-7301
• /
• 2014

With the development of IT Info-Communications technology, the vehicle with a combination of wireless-communication technology has resulted in significant research into the convergence of the component of existing traffic with information, electronics and communication technology. Intelligent Vehicle Communication is a Machine-to-Machine (M2M) concept of the Vehicle-to-Vehicle. The Vehicle-to-Infrastructure communication consists of safety and the ease of transportation. Security technologies must precede the effective Intelligent Vehicle Communication Structure, unlike the existing internet environment, where high-speed vehicle communication is with the security threats of a wireless communication environment and can receive unusual vehicle messages. In this paper, the Vehicle Identification number between the V2I and the secure message communication protocol was proposed using hash functions and a time stamp, and the validity of the vehicle was assessed. The proposed system was the performance evaluation section compared to the conventional technique at a rate VPKI aspect showed an approximate 44% reduction. The safety, including authentication, confidentiality, and privacy threats, were analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.437-446
• /
• 2017

70 percent of Korea's territory is covered with mountains, whose difficult conditions can cause damage to facilities. Recently, the demand for facilities related to outdoor activities including monorails has been on the rise, and such facilities are much more likely to become damaged. For this reason, a monitoring system applying IoT to mountainous areas was developed and its applicability is evaluated in this study. The current status of the existing mountainous facilities and monitoring systems were reviewed, and the current wired monitoring technology was analyzed. A scenario for IoT-based monitoring was developed, and then sensor nodes were developed, which include an RF-communication module and interface, power-supply and solar-cell. A testbed was set up at K University. The same data was collected by the wireless system as had been collected by the wired one. The study findings are as follows. Firstly, by using the wireless system, it is estimated that the construction duration can be reduced by about 25 percent, while the construction costs can be reduced by about 3~52 percent. Secondly, the safety of the construction workers can be improved by making the working conditions less dangerous, such as by eliminating the need to transport cables.