• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1679-1685
• /
• 2022

In this paper, we propose an optimal multi-hop transmission scheme to maximize the end-to-end data rate from the source to the destination node in a wireless powered communication network. The frame structure for multi-hop transmission is presented to transmit multi-hop data while harvesting energy. Then, the transmission time of each node that maximizes the end-to-end transmission rate is determined through mathematical analysis in consideration of different harvested energy and link quality among nodes. We derive an optimization problem through system modeling of the considered wireless powered multi-hop transmission, and prove that there is a global optimal solution by verifying the convexity of this optimization problem. This analysis facilitates to find the optimal solution of the considered optimization problem. The proposed optimal multi-hop transmission scheme maximizes the end-to-end rate by allocating the transmission time for each node that equalizes the transmission rates of all links.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.92-101
• /
• 2012

In this paper, we propose a distributed transmit power control algorithm for optimal end-to-end throughput in wireless multihop networks. Considering a solidarity property of link rates consisting of a multihop link and the fact that the multihop end-to-end throughput is determined by the minimum link rate, the proposed scheme controls the transmit power to make all link rates be equal and so maximizes the end-to-end throughput of multihop link. In addition, in the proposed scheme the transmit node calculates its transmit power autonomously in a distributed manner just through the information sharing with its neighbor nodes and so decreases the information sharing overhead. Simulation results show that the proposed scheme achieves significant improvements in terms of end-to-end throughput and power consumption compared with the conventional maximum equal power allocation scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.35-41
• /
• 2017

To solve the shortage of radio spectrum and utilize spectrum resource more efficiently, cognitive radio technologies are proposed, and many studies on cognitive radio have been conducted. Multi-hop routing is one of the important technologies to enable the nodes to transmit data further with lower power in ad-hoc cognitive radio networks. In a multi-channel cognitive radio networks, each channel should be allocated to minimize interference to primary users. In the multi-hop routing, channel allocation should consider the inter-channel interference to maximize network throughput. In this paper, we propose multi-channel scheduling scheme which minimizes inter-channel interferences and avoids collision with primary users for the multi-hop multi-channel cognitive radio networks. The proposed scheduling is designed to determine both of routing path and channel selection. The performance of proposed channel allocation scheme is evaluated by the computer simulation in the aspect of capacity and collision rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.499-502
• /
• 2018

We propose a wireless-powered multihop transmission scheme using inter-node cooperation in a linear network topology. The proposed protocol determines the energy transfer time for each node to make the lifetime of the each node be equal in order to maximize the lifetime of the multihop path. To make the lifetime of each node the same, we apply the flocking algorithm which imitates the behavior of a bird flock flying at the same velocity, so that the lifetime of the nodes is averaged locally. Simulation results show that the proposed algorithm can maximize the lifetime of the multihop path by making all nodes have the same lifetime.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.17-22
• /
• 2013

In this paper, we propose a multi-hop cooperative transmission protocol over Rayleigh fading channels. In the proposed protocol, the multi-hop cooperative transmission is used to improve the system performance. Due to broadcast nature, we do not limit the receiving node to be only the next node, but the destination and all the nodes between the transmitting node and the destination. The proposed protocol can hence save the average transmit power, compared with multi-hop direct transmission protocol due to the skipped transmissions from some intermediate nodes or chosen relays. The proposed scheme is implemented and evaluated in mobile ad-hoc wireless networks.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.37-42
• /
• 2007

This paper reconsiders established power conservation models for ubiquitous sensor networks that use relay nodes instead of direct communication and proposes novel network power consumption model with consideration of the channel level and radio chip level simultaneously. We estimate the effect of minimum hop-count policy in terms of network power consumption through simulation of various situations for low power RF module CC2420. It is observed that maximum RF power and minimum hop-count results in lower energy consumption relatively. Also, in total network energy consumption, which is included re-transmission, minimum hop count policy presents decrease by 33.1% of energy consumption in compare with the conventional model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.657-658
• /
• 2015

In an wireless sensor network, energy efficient routing protocol is important for multi-hop transmission because senor nodes are powered by battery. In multi-hop transmission, specifice nodes are used and the battery power becomes low, it induce the asymetric remaining power among the nodes and makes the network lifetime reduced. In this paper, we propose a power-aware routing protocol which determines the routing path considering the remaining power of the nodes. Simulation results shows that the proposed routing scheme minimize the transmission delay and increase the network lifetime.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.598-599
• /
• 2015

For the wireless mesh networks, efficient routing protocol is required to transmit data from source to destination node through multi-hop transmission. Multipath routing enable the stable data transmission even in the case of traffic congestion or unstable link. In this paper, we propose partial multipath routing which does not make a full multipath but partial for some parts of unstable links. This partial multipath routing reduce the number of nodes for routing and minimized the required power.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.277-279
• /
• 2005

무선 멀티 홉 네트워크는 기지국 없이 중간의 무선 단말기를 경유해서 메세지를 전송하므로 무선 단말기의 전력 상태나 이동에 따라 그 토폴로지가 자주 변한다. 따라서 목적지까지 경로를 탐색하고 유지하기 위해 효율적인 경로 탐색 기법에 대한 연구가 필요하다. 그러나 경로 탐색 과정은 경로 탐색 메세지를 네트워크 전체로 전파하는 플러딩으로 인해 네트워크의 처리율을 크게 감소시킨다. 플러딩으로 발생하는 트래픽을 억제하기 위해 제안된 선별적인 플러딩 기법 중 이웃 노드 정보에 기반 한 접근 방식은 비교적 정확하게 재전송에 필요한 노드를 선별할 수 있으나 HELLO 패킷을 주기적으로 발생시켜야 한다. 본 논문은 이웃 노드의 맥(MAC) 계층에서 발생하는 제어 메세지를 청취해서 이웃 노드의 트래픽 정보를 수집하고 이것을 이용해서 재전송에 필요한 노드를 선별하는 기법을 제안 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1917-1924
• /
• 2015

Efficient routing algorithm is required to transmit data from source to destination by multi-hop transmission in wireless sensor networks. In the multi-hop transmission, multipath routing can be one of the solutions to cope with the traffic congestion and unstable link condition. In this paper, we propose partial multipath routing which does not establish a secondary full routing path but a partial multipath to complement some poor links, and it can enable stable data transmission and reduce the number of nodes in routing path and the required total power compared with conventional multipath routing.