• Transactions of Materials Processing
• /
• v.11 no.8
• /
• pp.691-700
• /
• 2002

Injection molded plastic parts have many surface detects: weld line, sink mark, flow mark, gloss, shading, scratching, and so on. Because these surface faults have not been accepted esthetically, plastic parts are Produced through painting or texturing. The purpose of this paper is to develop a paintless molded part of TV Mask Front by flow control method and gas-assisted injection molding. In order to minimize defects from injection molding, this study was carried out using computer aided injection mold filling simulations using MF/FLOW and MF/GAS. Based on these numerical results, we developed FR(Flame Retardant) HIPS and established guidelines of part design, mold design, and Processing conditions. We have achieved of cost sayings, improvement of productivity, and utilization of recycling by eliminating surface defects and painting process.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.988-993
• /
• 2004

This paper considers corrosion problems in the bolt connection of weathering steel box girder bridge using the external electric type corrosion resistance method which resisted to local corrosion in coated steel surface with contacted air. The weathering steel was created a rust itself in the passive state. but a coated box girder type was easily dew form could be made galvanic cell that accelerated corrosion. so that it was ruled by protection coat with some paint. Therefore, it needed that can be applied the external electric type corrosion resistance method in coated surface. As a result of the test of polarization amount had measured that the weathering steel was higher currents than the general steel by about $5\~10\%$. Therefore. an external electric type corrosion resistance method can be used to protect local corrosion in the coated bolt connection of weathering steel box girders effectively.

• Journal of the Korean Society for Railway
• /
• v.7 no.2
• /
• pp.39-47
• /
• 2004

연강(mile steel)은 철도차량 차체의 주요 재질로 오랫동안 사용되어 왔으며, 다양한 강도 특성과 저렴한 가격, 용이한 작업성등의 이유로 현재까지도 널리 적용되고 있다. 그러나 연강은 부식에 취약하므로 도장작업이 필수적이고, 부식에 대한 여유로 인해 판두께의 감소가 제한적이므로 경량화가 곤란하고, 정기적인 유지보수가 필요한 단점이 있다. 반면에 스테인레스강(stainless steel)판재는 내부식성이 강하므로 무도장이 가능하고, 차체의 내구 수명이 증가하며, 유지보수가 편리하다는 장점이 있다. 또한 내부식성과 고강도 특성으로 차체 판재의 두께 감소가 가능하므로 경량화에 유리하고, 차체 표면의 다양한 표면처리가 가능하므로 외관의 미려함을 높일 수 있다. 스테인레스강는 연강에 비해 상대적으로 고가의 재질이지만 유지보수 측면과 경량화에 따른 운행비용 측면에서 볼 때 철도차량 차체의 재질로서 유용성을 가지고 있어 활발히 적용되고 있다. 국내에서는 1990년대초 과천선 전동차를 시작으로 스테인레스강 철도차량이 본격적으로 개발되어 상용화되었고, 새마을호를 비롯한객차에도 스테인레스강 차체를 적용하고 있다. 국내의 스테인레스강 철도차량 제작 기술은 이제 상당한 수준에 올라와 있으며 차량의 해외 수출은 물론 기술 이전도 활발히 진행되고 있다. 본 강좌에서는 스테인레스강 철도차량 차체의 특성과 함께 설계 방법을 정리하여 봄으로써, 향후 스테인레스강 철도차량 차체의 개선 및 발전을 위한 기초로 삼고자 한다.(중략)

• Corrosion Science and Technology
• /
• v.12 no.3
• /
• pp.149-157
• /
• 2013

In corrosion-sensitive areas of exsisting unpainted weathering steel bridges with closed box girder structures. there are some serious local corrosion problems because of rain water or dew water which can not be solved by exsisting maintenance methods. These problems must be controled technically because of bad. influence on the safety of bridge. This study is the first stage of developing the economic corrosion control manual for these local corrosion problems. Through the injection of tar sealant into the crevice of mock-up equipment, it was prooved that the corrosive sealant can be useful to corrosion control at crevice of corrosion sensitive area.

• Corrosion Science and Technology
• /
• v.12 no.4
• /
• pp.191-197
• /
• 2013

This study is the second stage of developing the corrosion control technical manual about unpainted weathering steel bridge with closed box girder structures. This paper contains selection of corrosive sealant to apply into crevice of upper flange, injecting test of sealant at mock-up equipment with various condition, evaluation of experiment result. Through the experiment of injection of sealants into crevice of mock-up equipment, it is proved that the tar sealant injecting corrosion control method is useful to protect corrosion at box girder upper flange corroded by remaning rain water with calcium chloride.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.591-599
• /
• 2008

Weathering steel has been widely used in bridges and cladding materials due to its superior atmospheric corrosion resistance. Actually, weathering steel has often been used in Korea as cladding material. However, the performance of the weathering steel in claddings has not been fully monitored. We conducted a field study on the performance of weathering steels and measured the quantity of corrosion loss on the weathering steel claddings in Korea. Based on the measured corrosion loss and weather (environmental) data, the equation to predict corrosion loss of weathering steels was proposed by using environmental factors in KIHO region in Korea. The proposed equation predicted very well the real corrosion losses of KIHO region.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.5
• /
• pp.114-122
• /
• 2007

In high strength bolted joints, the corrosion of base material causes the reduction of slip resistance of the joints. In this study, tensile tests on slip-critical joints utilizing Zn/Al metal spraying corrosion resistance method were carried out in order to prevent the corrosion and meet the required mechanical characteristics of joints. In addition, slip coefficient and surface roughness were calculated. The key parameters were surface finishing condition and thickness of coating with the identical geometry in all specimens. From the results, it is found that the slip coefficient of the joints with coated finish after sand blast treatment as well as those of non-coated joints with only sand blast treatment were similar or superior to 0.45, which is a specification criteria of slip coefficient in friction-typed joints.

• Convergence Security Journal
• /
• v.17 no.3
• /
• pp.115-124
• /
• 2017

The purpose of this study is to provide measures for National Assembly safety and control safety issues arise from increased National Assembly public tour services. First, the study provided the definition of National Assembly public tour and types of tour services, tour procedures, and visitor guidelines. Next, risk factors for National Assembly were discussed and environmental security of national major facilities were compared. Furthermore, four measures for strengthening safety for National Assembly were discussed. First, it is important to utilize special security guards in National Assembly since they can use special weapons unlike general security guards. Second, special guards can be flexibly utilized compared to general security guards. Third, based on the Private Security Law, there is no legal issues for utilizing special security guards since National Assembly is categorized as national major facilities. Fourth, educational programs for security guards are focused on National Assembly safety, brief education, martial arts, customer satisfaction, more specialized educational program for public tour programs should be provided.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.668-676
• /
• 2016

This study reviewed the planning characteristics of contemporary Japanese middle school architecture on which related studies are insufficient, aiming to obtain new ideas for planning Korean middle school facilities. Fourteen case schools built after 1990s were selected and analyzed. They were divided into learning-living space and other major spaces. The planning characteristics of the case schools are summarized as follows 1) The case schools were classified into two categories, departmentalized classroom type (D type) and usual with variation type (UV type) by school system. These categories can also be the classification standard for basic architectural characteristics in learning and living space of case schools. 2) D type case schools have departmentalized classrooms, home base, media space and teacher's space for learning-living space. D type case schools are divided into 'attached-to-classroom type' and 'separate type' depending on the adjacency of the home base and departmentalized classroom. 3) UV type case schools have multipurpose space around the classroom for learning-living space and can be divided into two types, i.e., 'directly adjacent' and 'separate', depending on the connectivity to classroom of multipurpose room. 4) Specialized classrooms are designed to have the openness to the public and the own characteristics of school subjects strengthened and show the spatial differentiation with connected ancillary spaces. 5) Libraries are designed as complex zones grouped with computer labs, audio visual rooms and multipurpose halls not as a single room and as open plan not with a closed wall. 6) The gymnasium is the basic sports facility with a martial arts room and outdoor pool, which are for after-school activities as well as physical education class. 7) The terrace, balcony and outdoor stairs are frequently used architectural vocabularies as diverse outdoor spaces with a variety of functions.

• Korean Journal of Weed Science
• /
• v.8 no.1
• /
• pp.71-89
• /
• 1988

This study was conducted to evaluate the effect of a growth retardant, Paclobutrazol on the growth, yield and its components. and physiological traits in peanut cv. Saeddle (early variety) and Nampung (medium variety). The results are summarized as follows : Main stem and branch length of both varieties were remarkably retarded at early growth stage application, but the retardation effect was reduced at late growth stage application. Number of branches was increased remarkably by treating 60ppm at 20days after seedling (DAS) in early variety. Lodging ill medium variety was not observed through growth period when 120ppm of Paclobutrazol was applied while lodging was not appeared between 40 DAS and 80 DAS in early variety. The numbers of riped pods in early variety was increased when application of 120ppm at 40 DAS was made while it was increased as application of 120ppm at 90 DAS in the medium variety. Cercospora leaf spot was reduced by spraying at 40 or 50 DAS regardless of concentration and varieties. Chlorophyll content and photosynthetic activity increased when paclobutrazol was applied during 40-60 DAS in early variety while these were observed at 90 DAS in medium variety. Seed weight tended to increase as paclobutrazol application was delayed. The ratio of pods to seeds was higher at 60ppm-40 DAS in early variety while it was higher at 120ppm-90 DAS in medium variety.