• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.260-269
• /
• 2002

The fire resistance of particulate polypropylene composite systems were investigated by using various reinforced particles such as zeolite, talc, $CaCO_3$ particles. In this study, The effect of particle size on the thermal properties of composite and the effect of reinforced particles on the fire resistance were studied. The inorganic reinforced particles used in this study were recycled zeolite(average particle diameter=85.34 $mu extrm{m}$), $CaCO_3$ (33.93 $mu extrm{m}$), and talc (18.51 $mu extrm{m}$). The fire resistance of composite systems was thoroughly examined by measuring limited oxygen index (LOI, ASTM D2863) and cone calorimetry (ASTM E1354, ISO 5660). Thermal stability of composite systems was thoroughly examined by measuring TGA. The flame retardants (DBDPO) and reinforced particles reduce the maximum heat release rate (M-HRR) in the order of Talc > $CaCO_3$ > recycled Zeolite. Comparing the cone calorimetry experimental results of the particle reinforced polymer composite system exhibited twice higher efficiency than DBDPO in polypropylene systems, and the LOI also showed similar trends to the cone calorimetry experiments. The optical and scanning electron microscopy techniques were used to investigate the composites ash layer and the core fracture surfaces in the burning process. The reinforcing inorganic particles seemed to accumulate at the surface of ash layer, and subsequently intercept the oxygen transport and heat transfer into the core area.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.431-437
• /
• 2019

The purpose of this study is to develop an organic-inorganic hybrid insulation materials which has an economic feasibility of organic level and excellent adiabatic performance and fire stability by impregnating organic materials with inorganic binder solutions. The organic base was commercial polyurethane sponge, and the inorganic binder slurry was prepared by mixing water and additives into recycled gypsum byproducts. As a result of evaluation of the developed materials, it was confirmed that it not only has excellent insulation performance of a thermal conductivity of 0.051 W/mK or less but also it is a semi-non-combustible materials specified in the Ministry of Land, Infrastructure and Transport Notice No. 2015-744. The developed materials can also be controlled for thermal conductivity and flame retardance according to density control during manufacturing process, and thus it can be applied to various insulation materials.

• The Korean Journal of Mycology
• /
• v.13 no.4
• /
• pp.235-241
• /
• 1985

The present study was designed to investigate biosynthetic patterns of polysaccharides under catabolic repression and derepression in Saccharomyces uvarum. Correlation coefficients between polysaccharide synthesis and polyphosphate accumulation were examined, according to the culture phase and under various phosphate concentrations (free, limited, sufficient). During catabolic derepression, biosynthesis of glycogen was enhanced. rapidly and highly in the cells grown on minimal medium, compared with those grown on the complete medium. Acid soluble glycogen type was the main component of total glycogen and alkali soluble glycogen was synthesized in small amount, after 24 hr culture, at the time of almost exhaustion of sugar in the medium. Total glycogen was accumulated highly in proportion to the amount of phosphate added to the medium. It could be postulated that type 'C' isoenzyme among ALPase was directly or indirectly correlated with the glucan synthesis. Mannan synthesis indicated maximal amount at the early exponential phase and stationary phase, and also acid soluble sugars at the stationary phase. Correlation coefficient between the mannan synthesis and poly-p-'C' accumulation, and also between mannan synthesis and phospholipid content indicated 0.866 and 0.726, respectively.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.573-579
• /
• 2014

The effect of synthesis conditions such as carbon nanotube (CNT), 2,2,2-trifluoroethylmethacrylate (3FMA), and composition of organic-inorganic material in ozone resistance and surface characteristics of ultraviolet cured organic-inorganic hybrid coating film has been investigated. Coating solution was prepared using tetraethoxysilane (TEOS), silane coupling agent methacryloyloxypropyltrimethoxysilane (MPTMS), 3FMA, various organic materials with acrylate group, and CNT, then bar-coated on substrates using applicator, and densified by UV-curing. It was found that ozone resistance and adhesion of the coating film were strongly dependent upon contents of TEOS, 3FMA, and CNT. Especially, ozone resistance, adhesion, and surface hardness of coating film with CNT were improved, relatively. Ozone resistance of coating film with a high TEOS content was increased, but adhesion was decreased. In addition, it was also found that ozone resistance of coating film was increased with contents of 3FMA. On the other hand, surface hardness was decreased with increase of 3FMA.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.1
• /
• pp.25-31
• /
• 1976

The purpose of this investigation is to find out the effects on the changes of microflora and the effects on the inorganic nutrients of the fertilized soil and the non-fertilized soil under submerged condition with the treatment of butachlor at the levels of 250, 500, and 1000ppm respectively. The survey was made within the period of 72 days with 7-day intervals under the incubated condition. The result came out to be the following: 1. The Fluctuated changes of soil microflora A. Bacteria: The plots treated by 500ppm of butachlor in case of non-fertilized soil showed the decreasing tendency of bacteria until 21st day. But there were no effects on the other plots. The plots treated by 250ppm and 500ppm in case of fertilized soil showed decreasing tendency on the 7th day, and 1000ppm until 21st days. B. Actinomycetes: There was no effects on the actinotnycetes in case of the non-fertilized soil but the fertilized soil showed some decrease. In both cases, actinomycetes have generally shown a little increase according to the time passage. C. Fungi: In both cases of the fertilized soil and the non-fertilized soil, the plots treated by the media showed some decreasing tendency in comparison with the control plots. There was no change to the number of fungi according to the time passage. 2. The fluctuated changes of nutrient A. $NH_4-N$: The whole plots showed decrease of $NH_4-N$ by adding butachlor. The higher the intencity of butachiar showed the more decreasing tendency of $NH_4-N$. In case of the non-fertilized soil, the highest increase of $NH_4-N$ appeared from the 7th day to 14th day, but showed degrease thereafter. The increasing tendency was seen in case of the fertilized soil plots. B. $NO_3-N$: Decrease of $NO_3-N$ was shown in the whole plots by the treatment of media, and on the 44th day of cultivation almost none of $NO_3-N$ was detected. C. $NO_2-N$: Whole plots showed the number of $NO_2-N$ highest on the 35th day, and there were nothing measurable on the 44th day. D. Eh: On the fertilized soil, the condition of reduction went on strongly but on the non-fertilized soil, the condition of reduction kept on till 42nd day and oxidation appeared thereafter.

• Microbiology and Biotechnology Letters
• /
• v.2 no.3
• /
• pp.141-147
• /
• 1974

The cultural conditions for L-glutamate production were investigated using Brevibacterium flavum nov. sp. D2209B, the most productive strain among 5 strains reported in preceeding paper. A temperature of 3$0^{\circ}C$ and a medium volume of 30 ml per 500-flask were selected as standard culture conditions. And the following results were obtained. 1. When the concentration of acetate in the medium was below 30 g per litre, the maximum amount of L-glutamate was accumulated. 2. KH$_2$PO$_4$, MgSO$_4$, FeCI$_3$ and MnCI$_2$ were required for the L-glutamate poduction, but the concentration of those inorganic salts little effected. 3. Signifcant amount of L-glutamate was accutnulated in the limited biotin concentration less than 0.3 ug per litre. 4. The addition of malic acid or succinic acid enhanced the accumulation. 5. The L-glutamate accumulation was related to the incubation time of seed; the amount of L-glutamate accumulated was maximum by inoculating 16-20 hour incubated seed. 6. In the medium containing sufficient amount of biotin for growth, L-glutamate accumulation was stimulated by the addition of penicillin at appropreate time during incubation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.991-994
• /
• 2003

Electronic Paper용 무기소재로 $TiO_2$ 나노입자를 적용하기 위해서는 분산시 침전문제, 입자의 전기영동 속도향상을 위한 충분한 $\xi-potential$확보, 분산제 첨가시 안정적 결합을 위한 acidic site의 확보등의 문제가 해결되어야 한다. 이를 위해 저온균일침전법으로 $TiO_2$ 나노입자를 제조하였고, 폴리머 체인을 통하여 encapsulation하여 최적의 분산과 전기영동조건 확보를 위한 공정조건에 대해 연구하였다. 실험결과 다양한 분산매에 계면활성제를 1.0wt% 첨가시 유전율상수가 2.5인 분산매에서 가장 좋은 $\xi-potential$을 얻을 수 있었으며 이를 바탕으로 acidic site에 따른 폴리머 체인의 흡착실험 결과 pH $1{\sim}2$의 조건에서 제조된 $TiO_2$ 나노입자의 경우가 체인과의 흡착정도가 가장 좋아 분산특성을 향상시킬 수 있었다.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.761-767
• /
• 2012

The polycarbonate (PC)-based optical diffusers for direct-lit LED backlight unit were prepared by using extrusion compounding followed by compression molding process. The application of inorganic porous silica particles as a diffusing agent in addition to conventional poly(methyl methacrylate) (PMMA) beads was attempted, and the optical, thermal, and mechanical properties of the prepared diffusers were investigated. The morphological observations revealed that the diffusing agents could be uniformly dispersed in the PC matrix without agglomeration by high shear stress generated during extrusion process. The incorporation of the porous silica particles mixed with PMMA beads remarkably enhanced the luminance uniformity with respect to both location and view angle for the diffuser, while minimizing the reduction in the absolute luminance, as compared with the diffuser containing only PMMA beads. In addition, thermal and mechanical properties of the diffusers were shown to be improved upon addition of the porous silica particles.

• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.198-204
• /
• 2005

Fluosilicate salts based hydration heat reducer(SWP-HR), used in this study, is composed of fluosilicate salts, soluble silica, aromatic polymer condensate and nitrate salt based inorganic compound with latent heat property. Effects of SWP-HR addition on the hydration heat and anti-crack property of cement mortar were investigated. Adiabatic hydration temperature and drying shrinkage length of SWP-HR added cement mortar had a tendency to decrease compared to those of cement mortar without SWP-HR addition. Also, it was confirmed through crack pattern experiment of plate-form specimen for elucidating crack-reducing characteristic that anti-crack property of SWP-HR added cement mortar was improved.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.562-568
• /
• 2003

Environmental problems due to waste tire and waste plastics let us develop practical and economically feasible products. For this purpose, the characteristics of waste tire/plastic composites including various additives were examined using internal mixer. Experimental results indicated that the tensile strength and the flexural strength of waste tire/plastic composites decreased with the waste tire content. When 20 wt% of PP was added to the waste tire (60 wt%)/HDPE composites, the tensile strength was 1.5 times higher than the composite without PP, It was also found that the strain at break of composites increased by 2.5 times with 10 wt% addition of ethylene vinyl acetate and styrene ethylene butylenes styrene respectively. When 10 wt% of glass fiber was added to waste tire (60 wt%)/ HDPE composites, the tensile strength was 63% higher than the composite without glass fiber.