• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.103-106
• /
• 2016

This survey was performed by Kasetsart University Department of Packaging and Materials Technology on Food Packaging Industry in Thailand, was to conduct on the status and trends of food packaging industry to obtain the information on the plastic of packaging materials in food packaging in Thailand. The survey conducted by field visits, questionnaires, interviews and personal communication as well as published data from different sources. The ration of plastic consumption among the industries, packaging is showed 49%, textile 15% and construction 11% respectively. Numbers of company among packaging industry, film processing company is 503, injection molding is 231, blow molding is 216. Production volume of PP, HDPE, LLDPE and LDPE is 1,950 mil. ton, 1,920 mil. ton, 1,150 mil. ton and 685 mil. ton, respectively. Import of plastic 16,668 mil. baht and export is 33,778 mil. baht. Plastic consumption is plastic bottle and flexible pouch, mainly being used in beverage industry. The past decade as it has been replaced by flexible pouches and aseptic cartons in Thailand.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3
• /
• pp.73-80
• /
• 1997

This paper describes structural optimization of optical fiber-wound mandrel hydrophones with Finite Element Method (FEM). The hydrophone is supposed to have operation frequency range of up to 10 kHz and show omni-directional sensitivity pattern at 5 kHz. Studied parameters are mandrel geometry, molding thickness, and material properties of constitutional parts of the hydrophone. Theoretical calculation result shows that pressure sensitivity of the hydrophone increased as either mandrel length or molding thickness gets larger. Also higher pressure sensitivity requires a mandrel or molding material with relatively low Youngs modulus or Poissons ratio. Hydrophone bandwidth increases either as the mandrel length becomes shorter or as the mandrel becomes harder. The omni-directional characteristic is improved as the mandrel length becomes shorter, at 5 kHz. With the above results, we determine the structure of an optical fiber-wound mandrel hydrophone which has the pressure sensitivity of $30 {\times} 10_{-7}$ Rad./Pa, operation frequency range of up to 10 kHz, and shows omni-directional sensitivity pattern at 5 kHz.

• Composites Research
• /
• v.26 no.5
• /
• pp.295-302
• /
• 2013

In this study, Al5052/CFRP composites were fabricated for an automobile component by compression molding process inside a U-channel mold. Al5052 sheet were treated by sand blasting with two different particle sizes. Accordingly, surface roughness (Ra) values of $4.25{\mu}m$ and $1.85{\mu}m$ were obtained for the treated Al5052 sheets. The effect of surface roughness of Al5052 sheets on the adhesion and mechanical properties of Al5052/CFRP composites have been evaluated. Shear lap test and 3-point bending test were conducted. Results showed that the shear load for the composite fabricated by using the treated Al5052 sheets with Ra value of $1.85{\mu}m$ and $4.25{\mu}m$ were 3 and 5 times higher than Ra value of $0.73{\mu}m$ of the composite fabricated by using the untreated sheet. The bending stress of 200MPa was obtained for the composite fabricated with untreated Al5052 sheets. The bending stress increased to 400MPa when the composite fabricated from treated sheets. However, the bending stress was not influenced by treating condition through sand blasting.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1150-1156
• /
• 2007

In this paper, two novel subsurface antennas for remote management of underground facilities using PCS and cellular wireless network are proposed. The proposed subsurface antenna is a dual band circular patch which is inserted and molded for the protection of the antenna into a metal such as a manhole cover. The antenna is designed considering the resonant frequency shift of the antenna due to the insertion and molding. The measured return loss and receiving power of the fabricated antenna comparison with a dipole shows that two proposed subsurface antenna can be used for remote management of underground facilities using PCS and cellular systems.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.2
• /
• pp.65-70
• /
• 2014

Warpage of top packages to form thin package-on-packages was measured with progress of their process steps such as PCB substrate itself, chip bonding, and epoxy molding. The $100{\mu}m$-thick PCB substrate exhibited a warpage of $136{\sim}214{\mu}m$. The specimen formed by mounting a $40{\mu}m$-thick Si chip to such a PCB using a die attach film exhibited the warpage of $89{\sim}194{\mu}m$, which was similar to that of the PCB itself. On the other hand, the specimen fabricated by flip chip bonding of a $40{\mu}m$-thick chip to such a PCB possessed the warpage of $-199{\sim}691{\mu}m$, which was significantly different from the warpage of the PCB. After epoxy molding, the specimens processed by die attach bonding and flip chip bonding exhibited warpages of $-79{\sim}202{\mu}m$ and $-117{\sim}159{\mu}m$, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.121-127
• /
• 2022

Micro-LED is a light-emitting diode smaller than 100 ㎛ in size. It attracts much attention due to its superior performance, such as resolution, brightness, etc., and is considered for various applications like flexible display and VR/AR. Micro-LED display requires a mass transfer process to move micro-LED chips from a LED wafer to a target substrate. In this study, we proposed a vacuum chuck method as a mass transfer technique. The vacuum chuck was fabricated with MEMS technology and PDMS micro-mold process. The spin-coating approach using a dam structure successfully controlled the PDMS mold's thickness. The vacuum test using solder balls instead of micro-LED confirmed the vacuum chuck method as a mass transfer technique.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.48-50
• /
• 2003

개폐형(On/Off) 솔레노이드 액츄에이터의 설계에서는 온도상승을 고려한 권선수 산출이 가장 중요하고, 제작과정에서는 설계단계에서 산출된 권선수를 정확하게 정렬권선 형태로 구현해 내는 것이 가장 중요하다. 본 연구에서는, 비 정렬권선이 개폐식 솔레노이드 액츄에이터의 동작에 미치는 영향을 실험적으로 분석하였다. 실험은 하나의 정렬권선 코일과 비 정렬 상태가 다른 세권선을 사용하여 보빈과 연결된 요크가 있는 경우와 없는 경우를 각각 실험하고 그 때의 흡인력 온도상승 소비전력 등의 특성을 비교하였다. 특히, 온도상승 실험은 실제 사용시의 상황을 구현하기 위하여 권선상태가 다른 4종류의 코일 각각에 100만회의 내구성 시험을 실시하면서 작동횟수를 등분하여 코일, 요크, 몰딩부의 각 측정점 온도를 측정하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.351-354
• /
• 2004

This work presents a simple and cost-effective approach for maskless fabrication of positive-tone silicon master for the replica molding of hyperfine elastomeric channel. Positive-tone silicon masters were fabricated by a maskless fabrication technique using the combination of nanoscratch by Nanoindenter ⓡ XP and XOH wet etching. Grooves were machined on a silicon surface coated with native oxide by ductile-regime nanoscratch, and they were etched in a 20 wt％ KOH solution. After the KOH etching process, positive-tone structures resulted because of the etch-mask effect of the amorphous oxide layer generated by nanoscratch. The size and shape of the positive-tone structures were controlled by varying the etching time (5, 15, 18, 20, 25, 30 min) and the normal loads (1, 5 mN) during nanoscratch. Moreover, the effects of the Berkovich tip alignment (0, 45$^{\circ}$) on the deformation behavior and etching characteristic of silicon material were investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.295-298
• /
• 2004

Automobile door-handle is assembled with three parts that are base, skin and cover. Over-molding processing makes assembly of the base and skin. The skin part that was made by PVC polymer has various thickness. Plastic injection molding simulation of part including significant changed thickness as skin is an inaccuracy comparing with real injection molding. To solve this problem, two commercial flow prediction software that are Moldflow MPI and MAPS 3D were used in this study. Simulations were conducted for three types mesh. Taguchi method was applied for simulation experiments. It will be need to compare with simulation results and real over-molding behavior in the near future.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.292-299
• /
• 2003

청과류는 수송과 취급기간 중에 충격, 마찰, 눌림, 타박 등에 지속적으로 노출된다. 그러므로 농산물의 품질을 저하시키는 물리적인 손상을 최소화하기 위해 최선의 처리와 수송방법을 선택할 필요가 있다. Hinsch 등(1993)에 의하면 충격흡수 시스템이 갖추어진 대형 냉동 트레일러에 체리, 복숭아, 배, 토마토를 수송하였을 때 3.5Hz에서 수직가속도가 가장 크게 나타났고 9-25Hz에서는 이보다는 약간 감소하였다 또한 6-18Hz에서는 트레일러의 모든 위치에서 수직가속도의 크기가 비슷하게 나타났고 3.5Hz에서만 트레일러의 앞쪽보다 뒤쪽에서 수직가속도가 적은 것으로 보고되어 다른 연구자들과는 상반된 결과를 보고하였다. (중략)