• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.216-221
• /
• 2009

This study was investigated the properties of boards prepared from woody of Broussonetia Kazinoki differed in density of board and mixed quantity of powdered phenolic resin. Water absorption decreased as the density of boards and resin content increased, but bending strength and brinell hardness increased as the density of board and the quantity of resin added increased. Thickness swelling increased as the density of boards went up, and that, in contrary, decreased as the quantity of resin added to the boards.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.16-21
• /
• 2001

Improvement of sound absorption capability of wood and wood-based board by resonant absorption was attempted. Sound absorption coefficients of wood and wood-based board which contain normal, simple perforation and stair type perforation had been estimated by the tube method using standing wave ratio. Sound absorption coefficients of wood specimens of simply perforated and perforated with stair were higher than that of normal specimens. Especially, in case of stair type perforation, it was about 50 to 60% higher than that of normal specimen in the frequency of 3 to 4KHz. It was considered that the cavity which had been formed by perforation with stair type behaved as a single resonator. Wood-based board showed good sound absorption coefficients in the frequency from 125Hz to 2KHz and that of perforated board showed a little higher in the frequency from 300Hz to 500Hz than that of normal board. The computed data of resonant frequencies at several sizes of cavity showed good accordance with the estimated data of those.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.85-90
• /
• 1995

목질보드 제조에 있어 매트의 최종함수율은 에너지가 필요한 목질 엘리먼트의 초기 건조공정이나 열압싸이클공정, 목질보드의 균질정합성, 목질재료의 물리 기계적 성질 및 치수안정에 지대한 영향을 주기 때문에 대단히 중요하다. 지금까지 PB에 대한 최종매트의 함수율에 대한 연구는 많이 보고되어 있으나 요소수지로 제조되는 MDF에 대한 연구보고는 없으며 미국과 한국을 위시한 각국이 MDF의 최종함수율을 PB에 준하여 8~11%로 조정하여 MDF를 제조하고 있다. 따라서 본 연구는 미국산 침엽수 혼합수종으로부터 제조된 가압 해섬섬유와 요소수지로 제조된 MDF의 물리 기계적 성질에 관련된 적정 최종매트 함수율을 규명하고자 실시하여 다음과 같은 결론을 얻었다. 1. 혼합 침엽수 원료로부터 제조된 요소수지제조 MDF의 적정 최종 매트 함수율은 13% 부근으로서 현재 MDF공장에서 적용되고 있는 8~11%보다 높았다. 2 평판이 시작되는 최종매트 함수율은 15.4%였다.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.546-555
• /
• 2009

To study an effective use of woods, three-ply hybrid laminated woods instead of crosslaminated woods which are composed of spruce in the face and three kinds of wood-based boards (MDF, PB, OSB) in the core were manufactured, and the effect of constitution elements for the core laminae on bending strength performances was investigated. Bending modulus of elasticity (MOE) of hybrid laminated woods had the highest values for the hybrid laminated wood types arranging OSB laminae in the core, and had the lowest values for those arranging MDF laminae in the core. These values were higher than those of various cross-laminated woods. The estimated bending MOEs of the hybrid laminated woods which were composed of perpendicular-direction lamina of spruce in the faces were similar to their measured values, regardless of wood-based boards in the core. However, those of the hybrid laminated woods which were composed of parallel-direction lamina of spruce in the faces had much higher values than those of their measured values, and it was necessary to revise the measured values. Bending modulus of rupture (MOR) of the hybird laminated woods had the highest value for those arranging OSB laminae in the core, and had the lowest values for those arranging PB laminae in the core unlike the bending MOE. By hybrid laminating, the anisotropy of bending strength performances was markedly decreased, and the differences of strength performances among wood-based boards were also considerably decreased.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.223-230
• /
• 2014

This study examined emission characteristics of far-infrared ray, formaldehyde, volatile organic compounds and deodorization rate of particleboard prepared at different target board densities and resin content levels, using the xylem part of Broussonetia Kazinoki Sieb. The deodorization rate increased, as the target density of board and resin content increased. Emission rates of the far-infrared ray and total volatile organic compounds (TVOCs) were 0.892~0.899, and $0.074mg/m^2{\cdot}h$ for particleboard prepared with the resin content of 13% and target density of $0.6g/cm^3$ while the deodorization rate was 80~90% for the same particleboard. The formaldehyde emission factor ranged from $0.004mg/m^2{\cdot}h$ to $0.006mg/m^2{\cdot}h$ for all particleboard fabricated at different resin content and target densities. These results indicate that particleboard prepared from the xylem part of Broussonetia Kazinoki Sieb have a potential as a building construction material.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.105-106
• /
• 2013

본 연구에서는 현재 사용되고 있는 대표적인 목질계 건축 재료를 대상으로 소방방재청 고시에 근거한 $45^{\circ}$연소성 실험을 실시하여 대상 실험 재료들의 방염 성능을 비교 평가 하였다. 실험결과, 잔진시간은 일반합판에서 높게 나타났고, 잔염시간은 OSB보드(Oriented Strand Board)에서 높게 나타난 것으로 분석되었다. 탄화면적과 탄화길이는 OSB보드와 중질 섬유판 보드(Medium Denstity Fiberboard)에서 높게 측정 되었으며, 6종류의 실험 제품들 모두 탄화면적과 탄화길이에서 기준치를 만족 못하는 것으로 평가 되었다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.161-162
• /
• 2020

In this study, as part of securing related data, water droplets were dropped on the upper part of the wooden board for flooring in an environment such as floor heating, and the degree of absorption according to the surface temperature change was tested. The test results showed that the contact angle of the surface was low (25℃→40℃) or the droplet was absorbed into the small plate and disappeared. The contact angle of the OSB and MDF was decreased within 30 minutes, but the surface water droplet was maintained longer than the plywood. This is because the surface is coated with hydrophobicity unlike the plywood, but moisture absorption in the cross section after the second processing will not be prevented and it will lead to defect occurrence problem.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.424-429
• /
• 2016

In this study, the carbonized boards were manufactured from different types of wood-based panel and then their moisture absorption/desorption properties were investigated and compared. The carbonization temperature was maximum $600^{\circ}C$ with 2 h maintains. Test results showed higher absorption/desorption capacity on carbonized plywood than carbonized MDF, PB, and OSB, respectively. However, carbonized MDF, OSB, and plywood had similar absorption/desorption rate per hour. It means carbonized OSB and plywood can transfer moisture into deeper side and then possibly hold more amount of water. Based on SEM images, carbonized OSB and plywood showed more like wood structure, while carbonized MDF and PB had only wood fiber or/and chunk of wood fragments. Therefore, original wood structure may affect moisture absorption/desorption capacity. In order to manufacture high moisture absorbing/desorbing carbonized board, wood structure should be considered and then carbonized.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.1-10
• /
• 2010

In this study, to study an effective use and improve strength performances of woods and wood-based materials, three-ply hybrid laminated woods which are composed of spruce in the face and three kinds of wood-based boards (MDF, PB, OSB) in the core were manufactured, and the effect of constitution elements used for the core laminae on bending creep performances was investigated. The shape of creep curves showed exponential function plots which the upper right side was increased, and differed among the kinds of wood-based boards used for the core laminae of hybrid laminated wood. The creep deformation perpendicular to the grain of faces of hybrid laminated woods was in order $C_{\perp}$(P) > $C_{\perp}$(M) > $C_{\perp}$(O) with PB, MDF and OSB in the core, respectively. It was found that the creep deformation arranged with OSB in the core had 2 times smaller than those arranged with MDF and PB in the core. By hybrid laminating, the creep deformation of spruce perpendicular to the grain was markedly decreased. On the other hand, the creep deformation parallel to the grain of the faces ($C_{\parallel}$ type) of hybrid laminated woods was in order $C_{\parallel}$(P) > $C_{\parallel}$(O) > $C_{\parallel}$(M) with PB, OSB and MDF in the core. The ratios among three hybrid laminated woods were considerably decreased, especially the difference between $C_{\parallel}$(P) and $C_{\parallel}$(O) hybrid laminated woods arranged with PB and OSB in the core was very small. These values showed 0.108~0.464 times smaller than creep deformation of three wood-based boards and it was found that creep deformation of three wood-based boards was considerably decreased by hybrid laminating. Creep anisotropy of hybrid laminated woods was greater in creep deformation than in initial deformation, whereas it was found that the values was much smaller than that of spruce parallel laminated woods.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.3
• /
• pp.7-10
• /
• 1992