• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.307-311
• /
• 2014

In this present study, Castanea crenata was found as an excellent biosorbent for the removal capability of copper ions among four different wood wastes (Castanea crenata, Pinus densiflora, Larix kaemoferi and Robinia pseudoacaia). Also, the removal efficiencies of 5, 10, 20, 40 and 50 mg/L copper ions using Castanea crenata from aqueous solution were investigated. The most effective particle size of Castanea crenata for removing 5 mg/L copper ions was found to be $43{\sim}63{\mu}m$. When the concentration of Castanea crenata increased, the removal efficiencies of copper ions were enhanced. In addition, when the 0.8 g/100 mL of Castanea crenata was used for 30 min, the removal efficiencies of 20 and 40 mg/L copper ions were 99% and 85%, respectively. Moreover, the chemical treatment of Castanea crenata with 1 M sodium acetate was required to improve the removal ability for 50 mg/L copper ions. Meanwhile, 1 M hydrochloric acid was selected as the optimal desorption agent with 93% desorption efficiency of copper ions for recycling of modified Castanea crenata. Therefore, these experimental results could be employed as economical and practical engineering data for the development of copper removal processes.

• Composites Research
• /
• v.35 no.3
• /
• pp.153-160
• /
• 2022

Cellulose nanofibrils (CNF) based on wood pulp fibers are gained much attention as part of biocompatible hydrogels for biomedical applications such as tissue engineering scaffolds, biomedicine, and drug carrier. However, CNF hydrogels have relatively poor mechanical properties, impeding their applications requiring high mechanical integrity. In this work, we prepare 2,2,6,6-tetramethylipiperidin-oxyl (TEMPO) oxidated cellulose nanofibrils hydrogels mediated with metal cations, which form the metal-carboxylate coordination bonds for enhanced mechanical strength and toughness. We conduct the large amplitude oscillatory shear (LAOS) test and Live/dead cell assay for obtaining nonlinear viscoelastic parameters and cell viability, respectively. In particular, the cell proliferation and viability change depending on the type of metal salt, which also affected the rheological properties of the hydrogels.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.149-160
• /
• 2022

In this study, a pull-out test considering the adhesive type, embedded length, and direction of re-bar was conducted to evaluate the pull-out performance of glued-in rod joints using timber and adhesive produced in Korea. In the test, the specimens using liquid adhesive showed better pull-out performance, and the longer the embedded length of the re-bar, the higher the maximum tensile load by inducing the yield of the re-bar first. Through the test results, a glued-in rod joints design, which is advantageous to design the adhesive strength stronger than the yield strength of re-bar, was proposed, and a correction factor of 0.75 for the adhesive strength considering construction error was also suggested.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.28-28
• /
• 2020

본 연구는 식용, 목재용, 가구용 등 유용한 상수리나무의 효율적인 양묘를 위한 기초 정보를 제공하기 위하여 용기의 종류에 따른 유묘 생장을 측정하고 조사하였다. 용기별 유묘의 엽수는 15구가 18.6개로서 24구의 18.5개보다 많았고, 엽건물중은 15구가 2.41g으로서 24구의 2.24g보다 가벼웠다. 줄기길이는 15구가 33.5cm로서 24구의 34.6cm보다 짧았고, 줄기직경은 15구가 4.48mm로서 24구의 4.77mm보다 좁았으며, 줄기건물중은 15구가 1.40g으로서 24구의 1.53g보다 가벼웠다. 뿌리길이는 15구가 39.2cm로서 24구의 49.1cm보다 짧았고, 뿌리건물중은 15구가 7.60g으로서 24구의 6.92g보다 무거웠다. 그리고 식물체건물중은 15구가 11.4g으로서 24구의 10.7g보다 무거웠다. 지상부와 지하부 (S/R) 비율은 15구가 0.50으로서 24구의 0.55보다 낮았다. 이와 같이 재배 용기의 크기에 따른 상수리나무 유묘의 생장은 여러 생장 측정 중 뿌리길이를 제외하면 T-검정에서 차이를 나타내지 않았다. 이렇게 보면 상수리나무는 용기 크기와 유묘 생장의 상관관계가 없다고 할 수 있으나 본 실험에서 노천매장 종자의 파종상 유묘를 선별하여 이식할 때 물리적 손상이 있을 수 있어 추후 추가적인 보완 실험이 필요하였다.

• Journal of Animal Science and Technology
• /
• v.51 no.1
• /
• pp.39-44
• /
• 2009

The objective of this study was to investigate the effects of an enriched diet supplemented with aqueous fibrolytic enzyme products (FEP) on In vitro fermentation and growth performance of Hanwoo Steers. Total mixed ration combined with fibrolytic enzyme products showed a slight increase in the pH level on In vitro fermentation. Acetate ratio in volatile fatty acids, and the concentration of total volatile fatty acids were significantly greater at 12hr and 24hr after cultivation (p<0.05). Dry matter digestibility was significantly increased in groups supplied with aqueous fibrolytic enzyme products at 24hr after cultivation (p<0.05). In a rearing trial, the average daily gain and feed efficiency improved in the treatment groups supplied with aqueous fibrolytic enzyme products. Nutrient digestibility such as DM, crude fiber, NDF, and ADF digestibility were also significantly increased with the addition of aqueous fibrolytic enzyme products (p<0.05). Therefore, the aqueous fibrolytic enzyme products supplementation on In vitro fermentation is effective in improving the condition of rumainal fermantation. Also two kinds of aqueous fibrolytic enzyme products were found to be effective in improving the average daily gain and feed efficiency in Hanwoo Steers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5861-5869
• /
• 2014

Existing studies of building exterior materials have focused on the colors or textures of cladding, and in terms of a design planning approach, have focused on the use of the environment and equipment and fire safety topics from an engineering perspective. As a result, little research has been done on performance guidelines for exterior materials, specifically according to the building type. Research into eco-friendly cladding materials is also in the rudimentary stage in a practical sense. In this study, the use of exterior materials over the last ten years in domestic construction was analyzed. The usage status of building exterior materials was evaluated quantitatively by frequency analysis, and its environmental performance is proposed through complex (qualitative + quantitative) analysis. The average value of the exterior material type number used for all analyzed buildings was 2.59. Glass, metal, stone, resin, cement, wood, and clay were used in that order with regard to the usage status. The analysis found that five of the materials satisfied the high efficiency and eco-friendly grading in terms of the four characteristics of an eco-friendly exterior. A list of eight eco-friendly elements was also proposed. The eco-friendly elements and characteristics of the exterior materials were derived to provide basic guidelines for domestic construction companies and design offices.

• The Korean Journal of Mycology
• /
• v.22 no.2
• /
• pp.196-208
• /
• 1994

Some additional fungi were collected during two field trips to Ullung Island in July and September of 1992. Through the observation of agaric fungi, 36 mushrooms were identified to the species or subspecies and are listed below. Among them, three species and one subspecies, Mycena luteopallens, Mycena macrocystidiata, Amanita hemibapha ssp. similis, and Pluteus petasatus, were confirmed new to Korea and are registered here with descriptions.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.3
• /
• pp.148-154
• /
• 2007

This study investigated the spatial distribution of the marine debris in Jinudo in the Nakdong river estuary. Types of marine debris in Jinudo are analyzed through sampling around some portion of its sandbar shoreline. The present study and its main results are summarized as follow: 1) Monitoring system, for evaluating the volume of marine debris, was established in the coastal region of $50\;m\;{\times}\;50\;m\;(=0.002\;km^2)$ over the southern part of Jinudo. All the marine debris of conceivable form are collected and their amount was also estimated. 2) During the $1^{st}$ collection in May 2007, the total weight of the marine debris was 1,110 kg in this site, which means the density of marine debris around the shoreline is $444\;ton/km^2$. After one month later, the collected marine debris was 23.75 kg and so we have the average density of $9.5\;ton/km^2$. From these results, it is suggested that the marine debris of 316.67kg was being accumulated per day over unit area($1\;km^2$). 3) The most frequent marine debris collected during monitoring campaigns was wooden material amounting to 85.86% of the whole collection; the rest were fishing gears such as nets and buoys(5.13%), household waste(2.34%), glass(0.94%) and metals(0.27%).

• Microbiology and Biotechnology Letters
• /
• v.5 no.1
• /
• pp.18-23
• /
• 1977

Experiments were carried out to pursue the availability and the feasibility of utilizable cellulosic materials as substrate for the production of cellulosic single cell protein. The resuluts were obtained as fellows. 1. Effects of carbolydrates as a sole carton source on the growth of Cellulomonas flavigena KIST 321 were examined. The result showed that cellulose and xylose would be most utlizable for cell mass production. 2. Alkaline treated waste papers and clothes resulted in good growth of the organism than intact ones did. However the waste papers as substrate of cellulosic fermentation were not digestible, even if the meterial was treated with alkalies. 3. Rice straw, rape straw and panic grass appeared to be good substrates for the cell mass production. 4. Leaves were proved to be a good substrate for the cell mass production, but wood sawdust was hardly digested by merely alkaline treatment. 5. When cellulosic wastes as the substrate were examined into the concentration of alkaline solution, the result suggested that the best productivity of cell mass from cellulosic materials was obtained on treatment with 0.8∼1.0％ NaOH solution. 6. The productivity of cell mass was increased by washing out with water after alkaline treatment of newspaper, pine sawdust, lime sawdust and pine leaf.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.126-138
• /
• 2017

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a raw material of wood adhesives. For the purpose, adhesive resins were formulated with NaOH- and $H_2SO_4$-hydrolyzed CF as well as crosslinkers, and then the properties and water resistance of the adhesive resins against hot water were measured. CF was made of mainly keratin-type protein, and no or very low content of heavy metals was detected. Hydrolysis rate of CF increased as NaOH concentration in hydrolysis solutions increased. However, in order to minimize the loss of adhesive property of protein itself by the severe hydrolysis of CF and to seek its proper hydrolysis conditions, NaOH concentrations in hydrolysis solution determined to adjust to 5%, 7.5% and 10%. In the NaOH-hydrolyzed CF, $H_2SO_4$-hydrolyzed CF as a hardener and crosslinker were added to formulate CF-based adhesive resins. Solid content of the resins ranged from 28.3% to 44.8% depending on hydrolysis conditions and type of crosslinker. Viscosity of the resins at $25^{\circ}C$ was very high. However, when the temperature of the resins was increased to $50^{\circ}C$, the viscosity decreased greatly and thus the resins could be applied as a sprayable resin. Retention rate measured to evaluate the water resistance of adhesive resins was the highest in the cured resin formulated with 5% NaOH-hydrolyzed CF and 5% $H_2SO_4$-hydrolyzed CF of 10% based on the solid weight as a hardener. Retention rate depending on crosslinkers added into adhesive resins was the highest phenol-formaldehyde (PF) followed by melamine-urea-formaldehyde (MUF) and formalin. The retention rate of CF-based adhesives formulated with 5% NaOH-hydrolyzed CF, PF and $H_2SO_4$-hydrolyzed CF of 10% and over did not differ statistically from that of commercial MUF resins. All of CF-based adhesives formulated with PF as a crosslinker and one with 5% NaOH-hydrolyzed CF of 55%, 5% $H_2SO_4$-hydrolyzed CF of 15%, and MUF of 30% on the basis of solid weight could be substituted for commercial urea-formaldehyde resins, From the results, CF can be used as a raw material of wood adhesives if hydrolyzed in proper conditions.