• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.39-48
• /
• 1993

End-matched disks of 7.7cm thickness were part-time dried in vacuum press dryer to investigate the drying characteristics by using drying schedules and end treatments. The ginkgo disks could be dried faster with severer end checks and ring failures by C schedule than by S schedule. There were no significant differences in drying rates and amounts of end checks, ring failures and V-shaped checks occurred between ginkgo disks end-taped with Korean traditional paper (KTP) and those untreated. The drying time of walnut disks was slightly reduced by end-taping with KTP. And the length of end checks and V-shaped checks and the frequency of defected disk were decreased more effectively than those untreated. The tangential strains and tangential drying stresses near bark sides of ginkgo and walnut disk untreated were developed in the early stage of drying and incresed slightly curvi-linearly above fiber saturation point (fsp) and more curvi-linearly below fsp. The influence of end-taping with KTP on the drying rate for impermeable walnut disk was stronger than that for permeable ginkgo disk.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.5
• /
• pp.430-452
• /
• 2021

The recent social atmosphere has been a preference for wood utilization and woodworks. The general public does not have many opportunities to enjoy wood culture, so there is a lack of awareness and foundation of wood culture. In this study, classification and case analysis of wood culture were conducted as basic research for establishing a promotion strategy for the general public to enjoy wood culture. The specificity of wood culture and cultural resources was analyzed to establish the concept of wood cultural resources. Through the analysis, wood cultural resources were defined as products created as a result of human activities that implied the cultural value of wood and wood use in terms of conservation, discovery, and utilization. The types of wood cultural resources were classified into seven categories using the classification examples performed on cultural resources: cultural heritage, cultural facilities, cultural festival, wood architecture, culture contents, culture education, and wood products. In addition, cases were searched and proposed for each type of wood cultural resources.

• Journal of the wind engineering institute of Korea
• /
• v.22 no.4
• /
• pp.171-177
• /
• 2018

In order to investigate the cause of damage of the offshore meteorological tower, the measured wind speed data were analyzed, the dynamic displacement due to fluctuating wind load and wave load was calculated, and the fatigue was examined for vortex-induced vibration. It was confirmed from the results that the vibration lasting for four hours occurred in the meteorological tower when the maximum wind speeds for 10 minutes were compared for both the vane anemometer and ultrasonic anemometer. The effect of the gust wind on the dynamic response of the meteorological tower was greater than the wave. However, the combined forces acting on the meteorological tower was much lower than the design force even though the wind and wave loads were simultaneously applied. The vortex-induced vibration seemed to be cause of the fatigue failure in the connecting bolts. The destruction of the offshore meteorological tower was considered to be a vortex-induced vibration, not a fluctuating fluid flows.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.6
• /
• pp.616-642
• /
• 2021

Improving public awareness of wood is essential for achieving the goal of establishing wood culture by expanding the use of wood. This study presents a basic examination of the strategy of revitalizing wood culture and a survey of its current status and requirements. The survey was divided into seven categories: awareness of wood culture; use characteristics of wood culture; preference and demand for wood culture; awareness of sub-fields of wood culture; awareness of the cultural resources of wood; trends of wood utilization; and wood-related living environment. Based on the survey results, the study analyzed four items: awareness of wood and cultural experience; awareness of the cultural resources of wood; wood-related living environment and trends of wood utilization; and preference and demand for wood culture. In this study, the public awareness of wood and cultural experiences, the first of four items, was analyzed using the survey results. Generally, wood and wood culture are viewed as materials and a cultural heritage, respectively. Moreover, wood is ecofriendly. However, no substantial difference was observed between the two perceptions. Forty-five percent of the respondents reported that using wood exerts a positive effect on the body and mind. However, such use also destroys forests. Additionally, the recognition of wood-related workers, such as engineers or skilled workers, was relatively low compared with educators, such as wood education experts. Moreover, less than 50% of the respondents answered that major projects related to wood culture are well-known, whereas 30% participated in wood education, such as woodworking experience, where the majority required hand tools. Furniture, wooden accessories, and wooden buildings were among the objects that individuals intended to make through the wood culture program. Approximately 23% of the respondents were aware about the wood culture experience center, while approximately 50% had visited it. The response rate to woodworking technology was 73%, where the highest response was found for wood education experts. To improve public awareness about wood, the importance of entertainment factors over educational factors should be considered in the experience of individuals. To provide opportunities to experience wood culture for more individuals, developing and actively promoting various contents, including entertainment elements, are necessary.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.2
• /
• pp.182-189
• /
• 2008

In private and public construction works, cost estimation and site productivity management are based on designed labor quantities calculated by the Standard Quantities per Unit (SQU). The designed labor quantities are regarded as the basis for insurance costs and safety and environmental costs and also affect the progress measurement of construction works. Even though the designed labor quantities from the SQU has been considered to be different from actual labor quantities put to construction works, there is no research that empirically analyzes the statistical differences. This study analyzes actual labor quantities of form workers, steel-bar fabricators, concrete pourers in reinforced concrete works of the 43 apartment projects, and compares the actual labor quantities to labor quantities from the SQU. It goes further to scrutinize the critical reasons underlying the differences through a survey on 65 practitioners and interviews with 32 site managers and supervisors. The regression models of labor quantities of the apartment concrete work produced by the present study will contribute to reasonable construction contracts based on the past actual costs and practical site management by the actual labor quantities.

• The Korean Journal of Quaternary Research
• /
• v.14 no.1
• /
• pp.33-48
• /
• 2000

Vegetation disturbance history of the Korean Peninsula from the Palaeolithic Age to the Koryo Dynasty (1392) has reconstructed by the use of various data sources. Active vegetation disturbance, which has begun during the Neolithic Age, seems to be more widespread on lowland and coastal areas in the early stages, but later expanded into inland areas. The ploughing of a field and the selective cutting of certain trees, such as oak trees, nettle trees and pine trees are noticeable, and eventually caused deforestation during the Bronze Age. The use of iron tools of the Iron Age has enabled the forest clearing to develope the dry fields. During the Three Kingdoms period (BC 57∼AD 918) extensive deforestation has maintained for the development of cultivated fields, as well as other activities, such as timber, lumbering, production of iron farm implement, ploughing by cattle. The encouragement of disafforestation on mountain slope and creation of terraced field during the Koryo Dynasty (918∼1392) has caused the deforestation over the country, along with the consumption of large amount of wood and timber for fire-wood, ship-building, mining, xylography and so on.

• Journal of Nutrition and Health
• /
• v.4 no.1
• /
• pp.49-62
• /
• 1971

한국인(韓國人)의 기초대사량(基礎代謝量)과 1일소비열량(日消費熱量)을 측정(測定)하기 위하여 Douglas씨(氏) ${\ulcorner}$빽${\lrcorner}$과 Scholander씨(氏) ${\ulcorner}$가스${\lrcorner}$ 분석기(分析器)를 사용(使用)하여 넓은 연령(年齡), 직종(職種), 활동(活動)의 영역(領域)에 긍(亘)하여 실험(實驗)을 행(行)하였다. 938 예(例)의 기초대사측정치(基礎代謝測定値)는 Boothby, Fleish, Robertson and Reid 등(等)의 표준치(標準値)와 근사(近似)하였다. 겨울에는 기초대사량(基礎代謝量)은 9.9%의 증가(增加)를 또한 수면중(睡眠中)의 대사량(代射量)은 기초대사량(基礎代謝量)의 약(約) 94%이었다. 또한 Sanborn Metabulator를 사용(使用)하여 1,000 명(名) 이상(以上)의 기초대사량(基礎代謝量)을 측정(測定)하였다. 또한 여러 가지 동작(動作) 활동중(活動中)의 소비열량(消費熱量)이 측정(測定)되었다. 하루의 전소비열량(全消費熱量)은 $3{\sim}7$일간(日間)에 긍(亘)하여 하루 24시간(時間)의 활동상황(活動狀況)을 분단위(分單位)로 기록(紀錄), 집계(集計)하고 이것과 기초대사량(基礎代謝量) 및 개별활동시(個別活動時)의 소비열량(消費熱量)을 참작(參酌), 계산(計算)하였다. 수면중(睡眠中)의 소비열량(消費熱量)은 기초대사량(基礎代謝量)에 준(準)하였는데 사무원(事務員), 교원(敎員), 의사(醫師), 약사(藥師), 점원(店員), 운전수(運轉手), 건축기사(建築技師), 설계사(設計師), 응원사(應園師), 목공(木工), ${\ulcorner}$펜기${\lrcorner}$ 공등(工等)의 1일소비열량(日消費熱量)은 FAO 한국협회책정(韓國協會策定)의 한국인(韓國人) ${\ulcorner}$칼로리${\lrcorner}$에 근사(近似)하였고 ${\ulcorner}$쿡${\lrcorner}$, ${\ulcorner}$웨이터${\lrcorner}$, 농부(農夫), 사공(士工), 기계공(機械工), 석공(石工)은 중등정도(中等程度)의 노동(勞動)의 3,000 ${\ulcorner}$칼로리${\lrcorner}$나 또는 중(重)한 노동(勞動)의 3,900 ${\ulcorner}$칼로리${\lrcorner}$에, 가정주부(家政主婦), 하녀(下女), ${\ulcorner}$디자이너${\lrcorner}$는 여자(女子)의 중등정도(中等程度) 노동(勞動)의 2,200 ${\ulcorner}$칼로리${\lrcorner}$, 간호원(看護員), 청소부(淸掃婦), ${\ulcorner}$쿡${\lrcorner}$ 방(房)바닥연마공(硏磨工)은 중(重)한 노동(勞動)의 2,800${\ulcorner}$칼로리${\lrcorner}$에 모심기 하는 날의 농부(農夫)는 격심(激甚)한 노동(勞動)의 4,100${\ulcorner}$칼로리${\lrcorner}$에 각각(各各) 가까웠다. 여자(女子)일지라도 포제용(鋪製用) 돌까기와 돌날르기는 남자(男子)의 중노동정도(重勞動程度)의 ${\ulcorner}$칼로리${\lrcorner}$를 소비(消費)하였다.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.145-151
• /
• 2014

The study examines the feasibility of hosting the International Wood Industry EXPO as a part of the effort to establish Wood Industry Cluster in Jeollanam-do. The provisional EXPO period suggested by the study is 30 days between July 23 (Saturday) and August 21 (Sunday) 2016 and the proposed venues are Namdo International Education Center, Woodland, and Woodcraft Center, Jangheung-gun, Jeollanam-do, and so on. According to the study, it is calculated that the expected investment cost amounts to around 4.5 billion won and the number of total potential visitors reaches 1,627,478. The study also predicts that the EXPO generates various economic effects and outputs that can be quantified as following; a production inducement effect equivalent of 344.5 billion won, an income inducement effect of 77 billion won, an employment inducement effect corresponding to 3,899 jobs, a value-added inducement effect equivalent of 143 billion won, and an indirect tax inductive effect of 32 billion won. Then, emphasizing the need for the organizing committee that can play an important role in managing the overall EXPO events, the study, based on the figures, concludes that the International Wood Industry EXPO 2016 is to be promoted at the regional and national level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.138-147
• /
• 2020

The construction field is one of the most representative job creation businesses, but it has been pointed out that the overall quality of the jobs is low because of the nature of the order-made production industry, such as unstable employment structure, aging workforce, etc.. Accordingly, the government plans to implement the "prevailing wage system" that guarantees a minimum wage for construction site workers. In reality, however, only a market wage could be used for a construction cost estimation because there was no standard for the prevailing wage. A comparative analysis of the prevailing wage and market wage was performed. This paper proposes a framework for estimating the reasonable prevailing wage in the construction industry. The results showed that the prevailing wage was estimated to be 4.7% lower than the market wage when the proposed framework is applied to the carpenters' case. This suggests that the proposed model could be used as an alternative for market wage considering the original purpose of the prevailing wage. This study will construct the basic data for scientific analysis on the wage, and finally, help estimate the reliable prevailing wage in the future.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.107-114
• /
• 2013

The interest in traditional Korean housing has greatly increasing in Korean housing market. However, it is difficult to wildly disseminate for a high construction cost reason. In order to effectively facilitate the Hanok construction, Korean government has initiated a project that develops a new style Korean housing, which meets the requirements of low cost and modernized life style. Cost of building is mainly affected by materials and construction methods. Hanok has some special commodities those significantly impact the cost. In order to effectively cut down the costs, well-organized planning for costs is very important. Also, improving the productivity by utilizing new materials and methods can result in cost down. In this context, this paper compared and analyzed two different types of Korean housing; one is a modernized Korean house which used new materials and methods, the other is a traditional Korean house which was build up by purely traditional methods. Productivity has also been compared and analyzed for 5 major commodities between two types of models. Based on these comparative data, effect of cost down by new model has been analyzed. As a result it is confirmed that by using the new materials and methods could highly effect to increasing productivity and cost down. Especially, the cost of Roofing have been more influenced by using new material while the Wood and Finishes have been influenced by new construction method. Construction cost of Foundation (Earthwork, Concrete, Masonry) and Openings were influenced both factors, changing of materials and methods.