• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.361-361
• /
• 2018

강우패턴이 유출반응에 미치는 영향을 분석하는 것은 수문연구에서 중요한 주제 중 하나이며 댐유역에 대해 기상 및 유출자료를 사용하여 이를 상세히 분석함으로써 이수기에 필요한 수자원을 예측 및 확보하는 것은 중요하다. 강우패턴이 유출반응에 미치는 영향을 상세히 분석하기 위해서는 댐유역의 상류부터 하류까지 많은 유출관측지점의 자료를 사용해야 하지만 상류의 소유역들은 대부분 미계측유역이라는 문제점이 있다. 본 연구에서는 자료공간확장 방법을 사용하여 미계측유역의 유출자료를 생성하고 이 자료들을 분석함으로써 강우패턴이 유출반응에 미치는 영향을 자세히 분석하였다. 먼저 안동댐유역내 관측유역인 안동댐, 도산, 소천유역을 대상으로 1989년부터 2009년까지의 기간 중 20개의 사상에 대하여 분포형 모형인 GRM 모형의 적용성을 조사하였으며 전반적으로 0.5 Nash-Sutcliffe 계수 이상의 타당한 모형효율성 결과를 얻었다. 그 후 자료공간확장 방법을 사용하여 안동댐 상류에 위치한 47개의 미계측 소유역들의 유출자료를 생성하였으며 세 관측유역을 포함한 총 50개 유역의 유출자료를 연구에 사용하였다. 그리고 총 50개 유역의 평균강우량 시계열 자료를 생성하고 이동평균방법을 사용하여 이 평균강우량 자료를 강우강도-지속시간 곡선으로 변환하였다. 강우패턴과 유출반응간의 관계를 분석하기 위해 합리식의 유출계수와 강우강도비율을 사용하였으며 유출계수와 강우강도비율을 계산하기 위해 유역별 도달시간을 사용하였다. 여기서 강우강도비율은 강우강도지속시간 곡선을 사용하여 첨두강우강도를 도달시간에 해당하는 평균강우강도로 나눠준 값이다. 그리고 이 유출계수와 강우강도비율을 유역면적에 대해 도시함으로써 그 경향을 조사하였다. 그 결과 20개 사상은 유출계수, 강우강도비율과 유역면적을 사용하여 물리적으로 타당한 네 가지의 타입으로 분류될 수 있었다. 이 네 가지 타입은 강우의 이동 및 분포와 상관이 있었는데 첫번째 타입은 안동댐 유역전체에 강우가 거의 등분포하는 경우, 두 번째는 강우가 유역의 상류방향으로 이동하는 경우, 세 번째는 강우가 유역의 하류방향으로 이동하는 경우, 그리고 네 번째는 강우가 유역에 무작위로 분포하는 경우였다. 이것은 어떠한 사상에 대해서도 유출계수와 강우강도비율을 유역면적에 대해 도시함으로써 강우패턴과 유출간의 관계를 분석할 수 있다는 것을 나타낸다. 그리고 이 네 가지 타입에 대한 강우사상들의 비율은 각각 65%, 20%, 10%, 그리고 5% 였다. 이 타입별 강우사상의 비율은 향후 강우-유출관계에 의한 수자원 예측 및 확보에 활용될 수 있다.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.312-319
• /
• 2013

Our understanding of the sensitivities of crop responses to changes in carbon dioxide, temperature, and water is limited, which makes it difficult to fully utilize crop models in assessing the impact of climate change on future agricultural production. Genetic coefficients of CERES-Barley model for major domestic cultivars in South Korea (Olbori at Suwon, Albori at Milyang, Saessalbori at Iksan, and Samdobori at Jinju) were estimated from the observed data for daily weather and field trials for more than 10 years by using GenCalc in DSSAT. Data from 1997-2002 annual crop status report (Rural Development Administration, RDA) were used to validate the crop coefficients. The sitecalibrated CERES-Barley model was used to perform crop growth simulation with the 99 treatments of step change combinations in temperature, precipitation and carbon dioxide concentration with respect to the baseline climate (1981-2010) at four sites. The upper boundary corresponds to the 2071-2100 climate outlook from the RCP 8.5 scenario. The response surface of grain yield showed a distinct pattern of model behavior under the combined change in environmental variables. The simulated grain yield was most sensitive to $CO_2$ concentration, least sensitive to precipitation, and showing a variable response to temperature depending on cultivar. The emulated impacts of response surfaces are expected to facilitate assessment of projected climate impacts on a given cultivar in South Korea.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.122-129
• /
• 2002

The analytical models and algorithm of the SPIKE code, which has been developed by KAERI's KALIMER team to investigate the sodium-water reaction phenomena in the liquid metal reactor, were introduced with its verification calculation results. The sodium water reaction of KALIMER IHTS was evaluated. Early stage of the sodium-water reaction consists of wave and mass transfer regimes. The pressure variations were independent of specific design features in the wave transfer regime. However in the mass transfer regime, the pressure variations were strongly dependent on cover gas volume and rupture disk set pressure. The early stage SWR analysis showed that the KALIMER IHTS with an appropriate cover gas volume and rupture disk set pressure had enough margin to its design pressure.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.3
• /
• pp.334-338
• /
• 1999

Porous silicon layers were fabricated with various conditions of HF concentration and current density. And their masses were measured. From these data, the porosity and fractal dimension were estimated and analyzed. We found that the porosity was proportional to the current density when the anodic reaction time was fixed and the constant values of fractal dimension could be estimated from a series of data with fixed HF concentration. The values of fractal dimension were decreased with increasing HF concentration. The obtained porosity and fractal dimension were compared with the 2-dimensional computer simulation based on diffusion limited deposition model. According to the simulation, the porosity was proportional to the diffusion length and the fractal dimension was inversely proportional to the diffusion length. Since, the diffusion length is proportional to current density and inversely proportional to base concentration, our experimental data qualitatively agreed with the results from the simulation. The porosity obtained by experiments, however, was not consistent with the results by simulation.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.819-827
• /
• 2009

This study was conducted to investigate the relationship between the sociodemographic factors and the Korean consumers palatability evaluation grades with Hanwoo sensory evaluation data. The dichotomy logistic regression model and the multinomial logistic regression model are fitted with the independent variables such as the consumer living location, age, gender, occupation, monthly income, and beef cut and the the palatability grade as the dependent variable. Stepwise variable selection procedure is incorporated to find the final model and odds ratios are calculated to find the associations between categories.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.129-147
• /
• 2002

This paper presents a variational equality formulation by Providing new dynamic route choice condition for a link-based dynamic traffic assignment model. The concepts of used paths, used links, used departure times are employed to derive a new link-based dynamic route choice condition. The route choice condition is formulated as a time-dependent variational equality problem and necessity and sufficiency conditions are provided to prove equivalence of the variational equality model. A solution algorithm is proposed based on physical network approach and diagonalization technique. An asymmetric network computational study shows that ideal dynamic-user optimal route condition is satisfied when the length of each time interval is shortened. The I-394 corridor study shows that more than 93% of computational speed improved compared to conventional variational inequality approach, and furthermore as the larger network size, the more computational performance can be expected. This paper concludes that the variational equality could be a promising approach for real-time application of a dynamic traffic assignment model based on fast computational performance.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.31-36
• /
• 1989

The second-order rate constants for the nucleophilic substitution reactions of para-substituted benzyl nitrates with para-substituted anilines in acetonitrile were conductometrically determined. Hammett ${\rho}$x and ${\rho}$y values and Bronsted ${\beta}$ values were obtained from these kinetic data. The reactions of Benzyl nitrates with the series of anilines showed linear Hammett plots with negative slopes. For the change of substituents in the benzyl nitrates, nonlinear Hammett plots with a concave upwards curve were obtained. We applied the potential energy surface and the quantum mechanical models in order to examine the transition state variations caused by changes in substituents on the nucleophile and the substrate. The results showed that the reaction was proceeded via the $S_{N}2$-type reaction mechanism in which the extent of bond-formation was greatly changed depending on the property of the substituents in substrate.

• Nuclear Engineering and Technology
• /
• v.19 no.1
• /
• pp.34-41
• /
• 1987

This work concerns with a comparison of the 1-dimensional (or 1-D) load follow analysis method with reference to the detailed 3-dimensional (or 3-D) computations. For this purpose a 1-D two-group finite difference code, HLOFO, and a 3-D coarse-mesh code based on the modified Borresen's method, CMSNAC, are developed. The CMSNAC code is used to obtain the 3-D power peaks and reactivity parameters in response to power swing from 100 to 50 and back to 100% in the 12-3-6-3 load cycle for the BOL of the KORI Unit 1 PWR core. The 3-D result is then compared with the 1-D HLOFO computations, the cross section and buckling inputs of which are obtained by combining the flux-volume weighting scheme with the approximate flux from the auxiliary 3-D computations. It is shown that the 1-D computation has a limited accuracy, yet it is confirmed that it can describe the core axial average behavior which is fairly consistent with the detailed 3-D computation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.152-152
• /
• 2015

도달시간은 강우에 의한 유역반응을 나타내는 시간매개변수로서 홍수유출에 큰 영향을 미치는 중요한 인자이며, 이에 따라 도달시간을 산정하기 위한 여러 가지 경험공식이 개발되어 사용되고 있다. 하지만 Kirpich, Kraven 및 Rziha 공식 등과 같은 대부분의 경험공식은 자연유역을 대상으로 개발되었으며 지형학적 인자만을 고려한 산정방법이기 때문에 높은 불투수율, 짧은 도달시간 등의 복잡한 수문학적 특성을 갖고 있는 도시유역에 적용하기에는 현실적으로 적합하지 않다. 현재까지 자연유역을 대상으로 한 도달시간 산정에 관한 연구는 국내 외에서 많이 수행되었으나 도시유역에서의 도달시간 산정에 관한 연구는 특히 국내에서 부족한 실정이다. 해외에서는 도시유역의 도달시간을 계산하기 위한 산정식으로 Kerby 공식과, 평평하게 포장된 지표면을 대상으로 개발된 Izzard 공식을 주로 사용하고 있다. Kerby 공식은 유역길이(L), 표고차(H), 그리고 조도계수(n)과 같은 지형학적 인자만 고려하는 반면, Izzard 공식은 지형학적 인자와 더불어 실제 유역의 수문특성인 강우강도를 함께 고려하고 있다. 본 연구에서는 도시유역인 사당천을 대상으로 Kerby 공식과 Izzard 공식을 적용하여 실제 수문특성의 반영 여부가 도달시간 산정 값에 미치는 영향을 알아보고자 한다. 또한 사당천 소유역 단위에서의 Kerby 및 Izzard 공식 적용과 더불어 도시유출모형에 주로 사용되고 있는 ILLUDAS 모형을 적용하여, 기존 도달시간 산정식의 결과와 운동파 해석 모형을 적용한 결과를 비교 분석하였다.

• Korean Journal of Cognitive Science
• /
• v.31 no.1
• /
• pp.1-23
• /
• 2020

This paper introduces SNUDM, an analysis program for Ratcliff's diffusion model, which has been one of the most important models in cognitive psychology over the past 35 years and which has come to occupy an important place in cognitive neuroscience in recent years. The analysis tool is designed with the basic principles of easy comprehension and simplicity in use. A diffusion process was programmed as the limit of a simple random walk in a manner resembling Ratcliff & Tuerlinckx(2002). The response time distribution of the model was constructed by simulating the time taken by a random walk until it reaches a threshold with small steps. The optimal parameter values in the model are found to be the smallest value of the chi-square values obtained by comparing the resulting distribution and the experimental data using Simplex method. For simplicity and ease of use, the input file used here is created as a file containing the quantile of the reaction time, the trials and other information. The number of participants and the number of conditions required for such work programs are given in a way that answers the question. Using this analysis tool, the experimental data of Ratcliff, Gomez, & McKoon(2004) were analyzed. We found the very similar pattern of parameter values to Ratcliff et al.(2004) found. When comparing DMAT, fast-dm and SNUDM with the generated data, we found that when the number of trials is small, SNUDM estimates the boundary parameter to a value similar to fast-dm and less than the DMAT. In addition, when the number of trials was large, it was confirmed that all three tools estimate parameters similarly.