• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2010년도 정기 학술대회
• /
• pp.126-131
• /
• 2010

본 논문에서는 극지 빙해역을 운항하는 쇄빙선박이나 해양구조물에 작용하는 해빙의 재료특성을 계측할 수 있는 간이 실험 장비를 제작하였다. 극지 빙해역을 운항하는 쇄빙선박의 빙저항이나 해양구조물에 작용하는 빙하중을 추정하기 위해서 극지 현장에서 실규모의 시험을 수행하게 되는데, 저온과 얼음이라는 악조건을 극복하기 위한 빙역학 기술과 특수 장비가 필요하다. 국내에 한국해양연구원 MOERI 빙해수조가 완공됨에 따라 얼음의 특성을 고려한 모형빙 재료특성 시험용 계측장비가 일부 마련이 되었으나 빙해역 현장 시험에 대한 경험이 전무하며, 계측장비에 대한 지식과 기술 역시 확보되지 못한 실정이다. 본 연구에서는 차후 쇄빙연구선 ARAON호를 이용한 빙해역의 실선계측 시 해빙의 강도를 측정하기 위한 계측시스템 마련의 일환으로 시험편 획득을 위한 코어링 장비와, 해빙의 재료특성 중 1축 압축강도를 측정하기 위한 간이 압축시험기 그리고 얼음의 결정구조를 파악하기 위한 편광기를 제작하였다. 또한 극지 현장실험에 적용할 실험기법 확보를 위한 일련의 과정을 마련하기 위해 제작된 장비를 이용해 소양호에서 현장실험을 수행하였고 계측된 결과를 참고문헌과 비교해본 결과 유사한 값을 갖는 것을 확인할 수 있었다.

• 대한조선학회논문집
• /
• 제57권1호
• /
• pp.15-22
• /
• 2020

Understanding the strength characteristics of model ice is an important issue for model testing in an ice model basin to estimate the ship performance in ice. In particular, the mechanical properties of the model ice including elastic modulus, flexural strength and compressive strength are key consideration factors. In order to understand the characteristics of the model ice during warm-up phase at KRISO's ice model basin, the strength properties are tested in this study. The infinite plate-bending method, in-situ cantilever beam test and ex-situ uniaxial compressive test are conducted to determine the strength properties of model ice. The strength characteristics of the model ice are then analyzed in terms of the warm-up phase and seasonality. These results could be valuable to quality control of the model ice characteristics in KRISO's ice model basin and to better understand the variations in strength properties during the ice model tests.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.495-501
• /
• 2008

Samsung Heavy Industries (SHI) and NRC's Institute for Ocean Technology (IOT) collaborated on a project to predict the performance of a new design for a Suezmax size tanker that had acceptable open water performance but was also capable of operating in ice. The resulting hull form was a single screw, single rudder design with a bulbous bow, modified for operation in ice. An important design consideration is the ability of the ship to maneuver in different ice conditions. This paper presents the results of maneuvering experiments in pack ice and level ice, using a free running model.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.109-115
• /
• 2011

The ice tank is important facility to check the performance of the ship and offshore in ice condition before the construction. MOERI(Maritime & Ocean Engineering Research Institute) constructed ice model basin on the end of 2010. The ice technology to know the phenomena of ice near the ship and to estimate power of the ship in model scale is the main characteristic of the ice model basin. To achieve this goal in one ice sheet, making of test plan and feasibility check of test possibility have to review in the beginning stage of the every test. This paper describes the number of maximum resistance and self propulsion test in a sheet of level ice and proposes the methodology to optimize pack ice, rubble ice, brash ice and ice ridge test in MOERI ice tank. The feasibility of free running test to know maneuvering performance in ice field and some specific idea to measuring ice thickness and ice ridge shape was proposed.

• 대한조선학회지
• /
• 제53권2호
• /
• pp.18-22
• /
• 2016

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.51-57
• /
• 2014

In the KIOST MOERI model ice basin, a lot of experiments to find the material properties of model ice and model ship tests are being performed. And therefore many data information was produced, yet it was saved as excel data format. In order to manage and use the data more effectively and systematically, a proper database management is required. To make realistic engineering DBMS(database management system), understanding of test process, the usage of data, design of data schema and computer language and system management are required. In this paper, basic design process and usage of DBMS based on network and multiple user concept is introduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1581-1582
• /
• 2006

본 논문은 그루빙(grooving), 타이닝(tining), 텍스쳐(texture) 등의 포장도로의 표면 상태를 차량에 장착된 고성능의 레이저 변위센서를 사용하여 주행 중에 정밀하게 측정하는 도로 표면 측정 장비 개발에 관한 논문이다. 본 논문에서는 전체 시스템을 설계 및 시험제작 하였으며, 차량 주행을 모사한 실험 모형을 이용한 실내 실험 및 시험도로에서의 실제 도로 표면 측정 실험을 실시하였다. 실내 포장도면 모사장비를 이용한 실험 결과 타이닝 폭 오차 2%, 깊이 오차 4%(60km/h)를 얻었으며, 실외에서 차량에 레이저센서를 장착 후 측정한 실험에서는 폭 오차 3.24%, 깊이 오차 5% (50km/h)가 측정되었다. 이러한 실험 결과를 토대로 시험도로 상의 실제 도로 표면 측정 실험에서는 25mm, 18mm, 26mm, 그리고 임의의 간격의 횡 방향 및 종 방향 타이닝을 측정하였고 이를 확인하였다.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.457-464
• /
• 2011

This paper deal with the validation of correction method of ice strength and thickness to the sea trial condition based on the ice model test results. It is very difficult to conduct the model test corresponding to the sea trial condition exactly. In addition, the available sea trial data is not sufficient for the validation of correction method. In the present study, the model test results of Terry-Fox ice breker have been used to compare the corrected results of sea trial test by varying its thickness and strength of model ice. The HSVA and ITTC methods have been applied to the present comparisions and the required power has been also validated by using the HSVA method. There are rather good agreement between the sea trial result and model test corrected by the HSVA and ITTC method. The more comparisons are expected to be carried out in near future.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.389-397
• /
• 2007

This research describes a framework to compare and analyze the icebreaker(Terry Fox) resistance in pack ice condition between with a refrigerated ice and a synthetic ice. Model tests with a refrigerated ice have been conducted at Institute for Ocean Technology (IOT/NRC) and the tests with a synthetic ice were conducted at Pusan National University towing tank. For the validation of further tests of measurement and accuracy, the open water tests were first carried out with same model ship to compare the test results of both Institutes. Two different size of the wax-type synthetic ice were used and tests were conducted in pack ice of three different concentration ice conditions. The test results show that the difference of resistance between with synthetic and with refrigerated ice becomes larger according to the increase of ship speed. Although the quantity of resistance difference is not so small in high speed range, the present study is predicted to be used as a useful correlation between synthetic and refrigerated ice.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.562-568
• /
• 2008

In this study, the target FSICR class is 1A whose target thickness of the brash ice is 46 mm in model scale. Normally ice floes for brash ice do not exceed 2 m in full scale, so the model ice sheet was cut by about 10 cm by 10 cm using hand saws. Since the target thickness of brash ice is 46 mm, 46 mm ice sheet makes one layer brash ice. For 23 mm thickness ice sheet, two layers should be accumulated to reach 46mm brash ice thickness. For 15mm thickness ice sheet, three layers need to be accumulated as the same as those in 23 mm ice sheet. New methodology to produce a brash ice was proposed. The results showed that it would be important to use multi-layer rather than single layer possibly because of significant thrust deduction from the propeller-ice interaction in the present ice condition (FSICR 1A).