• Journal of Ocean Engineering and Technology
• /
• v.14 no.4
• /
• pp.17-22
• /
• 2000

As the offshore oil fields are moved to the deep ocean, the oil production system of FPSO(Floating Production Storage and Offloading System) Type are constructed frequently these days. So, it is very important to estimate the drift motion and damping effects due to the drift motion simultaneously. The components of slow drift motion damping consist of viscous, wave radiation effect and wave drift damping. It is needed to estimate the wave drift damping more accurately than others. The wave drift damping signifies the time-rate of mean wave drift force on oscillating ship or ocean structure which constant speed. In order to calculate this, the 3-Dimensional panel method is employed with the translating and pulsating Green function in the frequency domain. The calculation is carried out for a Series 60 ($C_B$/=0.7) and the results are compared with other numerical ones.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.5 no.2
• /
• pp.45-50
• /
• 1968

The added mass and the added moment of inertia of a hard chine hull for heave and pitch were calculated by strip method. For the $k_2$ coefficients, Hwang's values for the straight-framed sections were used and for $k_2$ coefficients Porter's values for ellipses were used in the calculation. Comparisons on added mass and added moment of inertia of hard chine hull with those of ordinary hull form were briefly discussed. The results of the calculation for hard Chine hull give greater valves than ordinary ships at zero Froude Number. Beam draft ratio seems to be much influenced on the added mass and added moment of inertia.

• Journal of the Korean Institute of Navigation
• /
• v.4 no.1
• /
• pp.51-61
• /
• 1980

In order to evaluate rolling characteristics of high speed container carrier the author developed yaw-sway-rudder coupled rool equation, which is likely to be 5th order differential equation. The free rolling time history with particular reference to automatic steering, was computed upon the base of the yaw-sway-rudder coupled roll equation. The computed result explained effects of $C_1$ and $C_2$ on rolling behaviors and furthermore the effect of $C_2$ proved to be very effective where $C_1$ and $C_2$ are yaw gin constant and yaw-rate gain constant of auto-pilot respectively. Computation was carried out using Matsumoto's data of hydrodynamic force derivatives of 5 meter long container model.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.487-493
• /
• 1996

판(leaf)의 너비가 일정하고 두께가 균일하게 감소하는 두께감소 홀다운스프링집합체(Tapered-Thickness Holddown spring Assembly ; TT-HDS)에서 단순 보 이론과 Castigliano의 정리를 이용하여 TT-HDS의 탄성강성도를 해석적으로 구할 수 있도록 종래에 유도되었던 탄성강성도 평가식을 수정하고 확장하였으며 TT-HDS의 기하학적 설계자료를 이용하여 탄성강성도를 평가하였다. 아울러 ANSYS code 의 접촉요소를 이용하여 TT-HDS을 유한요소 모델링하여 탄성강성도를 수치적으로 평가하였다. 평가 결과 전단력 및 축력이 TT-HDS의 탄성강성도에 미치는 영향은 약 0.09∼0.16%정도로서 TT-HDS의 탄성강성도는 주로 굽힘모우멘트에 의해 지배되고 있음이 확인되었다. 또한 접촉요소로 유한요소 모델링하여 평가한 결과는 확장된 평가식으로 평가한 탄성강성도와 매우 잘 일치하고 있음을 발견하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.26-32
• /
• 2001

In this paper, elastic responses of a floating structure in waves with a breakwater are presented. The method of source-dipole distribution is used to analyze the velocity potentials for the fluid region. The deflections of structure are expanded approximately in terms of natural mode functions of free-free beam. The model for present calculation is a floating plate with an length of 1000m and the hydroelastic responses for a floating structure with a straight breakwater are shown. The effects of distance between breakwater and structure, bending rigidity and relative length of regular waves are examined.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.5
• /
• pp.800-809
• /
• 1987

For precise stress analysis of pressure vessel nozzle junction area, it should be modelized as a cylindrical shell with a cylindrical outlet attached on it, but because of its geometrical complexity, exact analysis and solution is very difficult to obtain. So, when the nozzle diameter is small compared to that of vessel, it is general to simplify the model as a flat plate with a cylinder. As the current nozzle shape is manufactured as "Through Type" to reduce the stress concentration around the nozzle junction part of pressure vessel, a theoretical analysis on the cylinder with finite length should be performed to accomodate this fact. In this paper, the general solutions which were obtained by applying Fulgge's theory to the finite length cylinder, membrane and bending theory to the flat plate were superposed to analyze the model. Each theoretical optimal values were obtained through the analysis of stress concentration caused by the variation of cylinder length and thickness, and these results were estimated by performing model experimentation.mentation.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.827-834
• /
• 1996

The effect of pipe breaks in the secondary side is investigated as a part of the fuel assembly qualification program. Using the detailed dynamic analysis of a reactor core, peak responses for the motions induced from pipe breaks are obtained for a detailed core model. The secondary side pipe breaks such as main steam line and economizer feedwater line braksare considered because leak-before-break methodology has provided a technical basis for the elimination of double ended guillotine breaks of all high energy piping systems with a diameter of 10 inches or over in the primary side from the design basis. The dynamic responses such as fuel assembly shear force, bending moment, axial force and displacement, and spacer grid impact loads are carefully investigated. Also, the stress analysis is performed and the effect of the secondary side pipe breaks on the fuel assembly structural integrity under the faulted condition is addressed.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.1
• /
• pp.45-52
• /
• 2001

The purpose of this study is the optimum modification of dynamic characteristics of stiffened plate structure. In the method of the optimization, finite element method(FEM), sensitivity analysis and optimum structural modification method are used. To begin with, using FEM, the dynamic characteristics of stiffened plate structure is analyzed. Next, rate of change of dynamic characteristics by the change of design variable is calculated using the sensitivity analysis. Then, amount of change of design variable is calculated using this sensitivity value and optimum structural modification method. The change of natural frequency is made to be an objective function. Thickness of plate and cross section moment become a design variable. It is shown that the results are effective in the optimum modification for dynamic characteristics of the stiffened plate structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.668-673
• /
• 2000

In this paper, not only the problems which could not be solved with Conventional Importance Sampling and Improved Importance Sampling of the early simulation method, and but also the improvements obtained in terms of computer run-time were studied, by applying the central moment algorithm to the digital communication channels. That is, the channel performance evaluation is done for obtaining the cumulative probability function of the statistical characteristics of received signal with estimating the central moment of the received signal mixed the noise in the digital communication receiver. We confirm the simulation run-time after we implemented the quaternary phase shift keying(QPSK) satellite communication channels using the Signal Processing Worksystem(SPW) of the Cadence incorporation to verify the suggested algorithm.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.1
• /
• pp.67-74
• /
• 1985

This paper describes a method for evaluating the vertical hull girder vibratory response associated with slamming of a ship at sea. The ship hull is considered as a nonuniform beam divided into twenty equal sections. Impact forces and structural parameters are used as input quantities on the computer (PRIME 550-II) to obtain the hull girder response in terms of relative displacements, accelerations, bending moments, shear forces, and stresses. Sample calculations are made on a MARINER-Class hull form using first three modes and again using first ten modes and again using first ten modes. The computed response is compared with Antonides's result in order to evaluate the adequacy of the method employed. It is believed that the method is another noticeable one to obtain whipping stresses of a ship to a seaway.