• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4_1
• /
• pp.23-32
• /
• 1992

The objective of this study is to identify the quantitative relationships among the important physical factors associated with failure of steel members under strong seismic excitations through very low-cycle fatigue tests. Very low-cycle fatigue is meant to be structural fatigue causing cracks and rupture in about 5~30 cycle ranges. The angle specimen was subjected to repeated axial Ioad after undergoing inelastic buckling. The test results reveal that the energy absorption capacities vary heavily with the history of loading and the failure mode. The maximum values of residual local strain at the initiation of a visible crack due to the very low-cycle fatigue were of the order of 25~40%, regardless of loading patterns, deflection modes, and width-to-thickness ratios.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.923-934
• /
• 1987

A flexible one-link robotic manipulator is modelled as a rotating cantilever beam with a hub and tip mass. An active control law is developed with consideration of the distributed flexibility of the arm. Equation of motion is derived by Hamilton's principle and, for modal control, represented as state variable form using Galerkin's mode summation method. Feedback coefficients are chosen to minimize the linear quadratic performance index(PI). To reconstruct the complete state vector from the measurements, an observer is proposed. In order to suppress vibration of the manipulator arm to desirable extent and to obtain accuracy of the positioning, weighting factor of input in PI is adjusted. Spillover effect due to the controller which controls several important modes is examined. Experiment is also performed to validate the theoretical analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.95-105
• /
• 1988

The dynamic characteristics of a tennis racket were identified by experimental modal analysis and the sweet spot due to these was calculated. A tennis racket was selected as a model reference and modal parameters of the racket were estimated from the transfer function measured by experiment. The transfer function was reconstructed by the modified modal parameters on the assumption that the racket was locally modified, for example, a change in the material of the frame and the attachment of a damping material to the grip. The change of the dynamic characteristics, especially natural frequency and magnitude of the second and the third vibrational modes, were evaluated from the reconstructed transfer function. The change of the sweet spot due to the modified modal parameters was estimated and visualized through computer graphic simulation by the criterion of the sweet spot measured before structural modification. The modal parameters for improvement of the dynamic characteristics.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.2
• /
• pp.174-185
• /
• 1994

This paper presents a modal solution of linear three-dimensional hydrodynamic equations using similarity transform technique. The solution over the vertical space domain is obtained using the Galerkin method with linear shape funtions (Galerkin-FEM model). Application of similarity transform to resulting tri-diagonal matrix equations gives rise 掠 a set of uncoupled partial differential equations of which the unknowns are coefficients of mode shape vectors. The proposed method.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.1
• /
• pp.112-122
• /
• 1995

본 연구에서는 절삭공구가 채터진동을 일으킬때 AE(Acoustic Emission) 신호와 어떤관계가 있는지를 실험적으로 연구하였다. 모달분석을 통하여 절삭공구의 고유진동수 및 모우드형상을 구하였으며, 실제 절삭실험에서는 이송방향 및 절삭방향의 가속도를 계측하여 위상치를 결정하었다. AE신호와 두 가속도 와의 관계를 알기위하여 AE 실험을 하였다. AE신호의 폭발점은 대개 Lissajous loop의 방향전환점에서 관찰 되었다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.6
• /
• pp.968-973
• /
• 1995

In order to investigate the annealing effect for RF magnetron sputtered $Ni_{83}Fe_{17}$ thin films, we have studied the spin wave rehaviors by FMR after annealing the samples at $135^{\circ}C,\;225^{\circ}C$ in air and at $160^{\circ}C,\;220^{\circ}C,\;330^{\circ}C,\;390^{\circ}C\;and\;420^{\circ}C$ in argon gas for one hour respectively. In FMR spectra for the films annealed in argon gas and the assputtered film at perpendicular resonance, only odd numrer spin waves are observed. But even numrer spin waves are observed for the film annealed in air at $225^{\circ}C$ recause of the large difference retween both surface magnetic anisotropy. In the case of the sample annealed at $420^{\circ}C$ in argon gas, the spin waves are shifted toward high field, can due to the increase of saturation magnetization during annealing. The spacings retween the spin wave resonance fields are narrowed rapidly, this is thought that the magnetic homogeneity increased in the film after annealing at high temperature.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.1
• /
• pp.12-19
• /
• 1993

진동시험 동안 구조물은 진동시험기로부터 높은 진동에너지를 받게 되는데 공급되는 에너지를 시험물에 전달하기 위해서는 시험물에 따라 다양한 종류의 진동시험치구가 필요하게 된다. 이중에서 T-형상 진동시험치구는 진동시험축에 대해 3방향으로 시험물을 설치할 수 있고, 형상이 간단하며, 또한 값이 저렴하므로 많은 설계자들은 T-형상 치구를 설계하여 사용한다. 그러나 이 치구는 수직판이 어떤 주파수에서 평판처럼 공진현상을 일으키기 때문에 동역학적으로 설계하기가 어렵다. 본 논문에서는 진동시험치구의 기능을 향상시키기 위해 모우드 시험(Model Testing)기법을 사용하는 방법과 시험결과를 근거로 설계변경을 위해 수직보강판, 수평보강판, 그리고 천연 고무패드를 사용하여 이것들이 치구의 동특성에 미치는 영향을 기술하며 그 결과를 치구설계 때 응용 가능하도록 한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.2
• /
• pp.60-66
• /
• 2003

For the estimation of chatter lobe boundary it is very important to calculate the natural mode of cutting process. There are many time series algorithms for getting the natural mode of structural endmilling dynamics considering the cutting process. In this study, we have compared several time series methods such as AR algorithm, ARX, ARMAX, ARMA, Box Jenkins, Output Error, Recursive ARX, Recursive ARMAX considering the sampling frequency. As a results, the ARX, ARMAX and IV 4 are more desirable algorithms for the calculation of modal parameters such as natural frequency and damping ratio In endmilling operation. Also these algorithms may be adopted for the natural mode estimation of endmilling operation for chatter lobe prediction.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.487-496
• /
• 1985

회전하는 축대칭 얇은 셸구조물의 진동 특성을 유한요소법에 의하여 해석하였다. 2개의 절점을 가진 Conical Frustrm 형태의 축대칭 요소를 사용하였으며 원주방향의 변위는 Fourier Series로 분해하여서 방정식의 수를 상당히 줄일 수 있었다. Sanders-Koiter의 셸이론을 사용하였으며 진 동 모우드는 회전의 영향을 설명하기 위하여 대칭 및 비대칭 모우드를 모두 고려하였다. Coriolis 행렬을 포함하는 운동방정식에서 고유 진동수를 계산하기 위해서 질량, 강성 및 Coriolis 행렬로 이루어지는 Hermitian 행렬의 Sturm Sequence Property를 이용하였으며, 좁은 밴드를 갖는 대형 행렬에 알맞는 Determinant Search 방법을 확장하여 고유진동수 및 벡터를 구하였다. 원통형 셸에 대하여 정지한 경우 계산한 고유진동수를 실험치 및 이론치와 비교한 결과 잘 일치됨을 알 수 있었다. 여러 가지 회전 속도에 대해서 얻어진 고유진동스를 이론치와 비교한 결과 잘 일치 됨을 알 수 있어\ulcorner며 회전의 영향으로 traveling wave진동의 현상이 나타남을 알 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.799-806
• /
• 1989

Component mode synthesis (CMS) method can be divided into free, fixed and hybrid interface method according to each component's connecting conditions. In this paper, major mode synthesis methods were reviewed and their accuracies were examined by comparing the calculated eigenvalues with those from full finite element (FE) model. Also, CMS is expanded into the coupling between finite element (FE) and experimental model. Since the assumed experimental data seldom have slope information, the slope information at the interface points is prepared by curve-fitting of the calculated values. A simple beam structure to show the effectiveness of the above method, and we found that it can improve the accuracy of the synthesis method in calculation, expecially in the low modes.