• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.426-439
• /
• 1988

Dynamic properties such as stiffness and damping of mechanical joints are essential for the accurate prediction of the dynamic behaviors of the system and subsequent improvement of the design. So far several techniques, analytical, experimental, or both have been developed. A technique using condensed F.E.M. model and Experimental Modal Analysis is presented to identify the joint structural parameters. First, modal parameters of structure are measured by certain complex frequency obtained from experiment to match with the order of the Experimental Modal Analysis model. Finally by equating the modal parameters obtained from experiment with those of the condensed system, the unknown joint structural parameters can be identified. A simulation study is conducted to investigate the accuracy of technique. The experiments are performed with ball bearings in a rotor bearing system.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.60-66
• /
• 1994

First, the beam waist size of TE$M_{00}$ Nd:YAG laser mode with Positive Branch Unstable Resonator was calculated. and then, the output power, fundamental mode and multimode beam quality factor of PBUR were measured and compared with thouse of reference resonator with plane pallalel mirrors. In characterizing the beam quality, the $M^2$ concept was used. The focusability of laser beam in unstable resonators was discussed with this $M^2$.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.125-130
• /
• 1994

A new cavity configuration for passive mode locking of fiber laser is proposed and demonstrated. It consists of a dichroic mirror at one end of the cavity, and a nonlinear loop mirror, which is a Sagnac loop, at the other end. The experimental observations are described for both Er-doped fiber laser and Nd-doped fiber laser. laser.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.57-61
• /
• 1991

최근 차량의 고급화에 따라 차실 소음 저감에 대한 연구가 많이 수행되고 있다. 차실의 소음은 주로 엔진 또는 동력전달 장치의 진동과 도로의 요철로 생기는 차체의 진동으로부터 발생된다. 차실에서 20-200Hz의 저주파수대의 소음은 주로 차체 진동과의 연성 효과로 기인한다. 따라서 이 주파수영역에 있어서 소음의 특성을 파악하기 위해서는 차실의 음향 모우드 해석과 차체 구조물의 진동과 차실 음향 모우드의 상호관계를 고려한 구조-음향 연성 해 석이 필요하다. 차실의 음향 모우드 해석을 위해서는 실험적 방법과 유한 요 소법을 이용하는 방법이 있다. 유한 요소법을 이용하여 음향 특성을 결정하 는 경우, 큰 어려움은 없으나 밀폐된 공동에서 경계면을 이루는 구조물의 진 동에 의해 음이 발생되는 경우 단순히 공간의 음향 특성만으로는 음향 응답 을 예측할 수 없게 된다. 즉, 경계면에서 반사되는 반사파는 경계면의 탄성 변위에 의해 운동 특성이 변화되어 반사되므로 입사파와 다른 특성을 가지 게 된다. 따라서 이러한 구조 진동 특성과 음향 특성을 모두 고려한 연성 해 석을 수행하여야 하며, 음향 모우드와 구조 진동 모우드와의 연성에 의한 음 향 응답 특성을 결정하기 위한 수치 해석 프로그램을 개발하게 되었다. 본 연구에서는 전.후 처리 및 사용자 편의성을 염두에 두고 차실소음해석 전용 프로그램(ACSTAP: Acoustical and structural, coupling analysis program) 을 작성하고 이를 실차에 적용하여 유용성을 보였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.209-218
• /
• 2002

The Vector Random Decrement technique has been developed as an efficient method for transforming ambient responses into free decays of linear structures. It is shown that the VRD functions nay contain as much information about the modes as the really measured free decay responses. In this paper, the theory of the VRD technique is extended by applying the concept of the mode shape ratio into the Ibrahim Time Domain modal parameter identification algorithm. The VRD function is not shifted in the correction procedures for constant time shifts of the proposed VRD technique. Thus, a number of points equal to the largest of the time shifts used in the vector triggering condition are not deleted. In the VRD functions, any influence of the input to the system is averaged out. The proposed technique is compared with the traditional VRD technique by assessment of the modal parameters. The applicability of the VRD technique has been justified through a simulation study and a study of the response of a laboratory beam model subject to ambient loads.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.420-427
• /
• 1993

Dielectric thin film mirrors are embedded in multimode and single-mode fibers by a fusion splicing technique. The fibers with $45{\circ}$ angled embedded mirrors serve as ultra-compact directional couplers with low excess optical loss of 0.2 dB for multimode and 0.5 dB for single mode at 1.3 ${\mu}m$ and excellent mechanical properties. The reflectance is wavelength dependent and strongly polarization depencient. Far-field scans of the reflected output power measured with a white-light source show a pattern which is almost circularly symmetric with aspect ratio of 1.09 at 5% of the peak power. The splitting ratio in a multimode coupler measured with a diode laser source is much less dependent on input coupling conditions than in conventional fused biconical-taper couplers, indicating that these couplers are less susceptible to modal noise occuring in optical fiber communication systems. Spectral properties of multilayer internal mirrors normal to the fiber axis have been investigated experimentally, and a matrix analysis has been used to explain the results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.911-920
• /
• 1989

It this study, beam-type bend specimen is used to evaluate the interlaminar fracture toughness of laminated composite under mixed-mode deformations. The specimen is loaded under three-point bending and hence produced mixed-mode deformations in the vicinity of the crack tip according to the variation of the thickness ratio on delamination plane. Total energy release rate is obtained by elementary beam theory considering the effect of shear deformation. The partitioning of total value into mode-I and mode-II components is also performed. The mixed-mode interlaminar fracture toughness is evaluated by experiments on specimens with several thickness ratios of delamination plane. As the part of delamination plane is thicker, the effect of shear deformation on total energy release rate is increased. Beam-type bend specimen men may be applied to obtain informations on the mixed-mode interlaminar fracture behavior of laminated composites.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.4
• /
• pp.529-534
• /
• 1986

본 연구에서는 실차를 대상으로 유한요소 해석을 통하여 차체 및 차실의 구조 진동 및 음향모우드를 구한후 관련 실험에 의한 검증 및 보완을 통하여 설계단계에서 의 진동 및 소음수준을 저감시키는데 유용한 정보를 제공코저 하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.409-420
• /
• 2002

This paper proposed a technique of structural re-analysis for the evaluation of dynamic responses of bridge structure under moving loads using experimental modal results. For successful structural re-analysis, it is required to have accurate estimation techniques of the modal characteristics of bridge structures. The natural frequencies and mode shapes were identified by direct fourier analysis techniques and damping ratios by the random decrement method, respectively. An interpolation method was also proposed for the extension of mode shape measured on limited DOFs. Second, the structural reanalysis was performed using moving mass model and identified modal parameters. The results from the reanalysis show that the proposed technique is very reasonable to evaluate the actual behavior of bridge structures under moving loads.

• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.69-72
• /
• 2002

The interlaminar problems near the free edge of composite laminates are analyzed in this paper. CFRP specimen (［+40/-40］s) and interleaved specimen (［+40//-40］s) with non-woven carbon tissue (NWCT) are discussed under tensile loading condition. The symbol “//”means that the NWCT is located between the CFRP interfaces. The NWCT has carbon short fibers which are discretely distributed with the in-plane random orientation. It was reported/sup 3)/ that the Mode Ⅱ interlaminar fracture toughness of CFRP laminates with NWCT is increased largely and the Mode I interlaminar fracture toughness is not changed significantly. Mode Ⅲ interlaminar fracture toughness is also an important factor in composite structures. But it is not easy to experimentally investigate the Mode Ⅲ interlaminar fracture toughness. The objective of this work is to study the effect of the NWCT and to fundamentally understand the Mode Ⅲ interlaminar shear characteristics of laminated composites with NWCT in the vicinity of a free edge by using finite element method analysis.