• Journal of the East Asian Society of Dietary Life
• /
• v.6 no.2
• /
• pp.277-284
• /
• 1996

The objective of this study was to screen the antimutagenicity of yam enzymatic browning reaction product (YEBRP), mucopolysaccharide and dietary fiber from yam to the mutagen of sodium azide and 2-aminoflourene (2-AF). Antimutagenicity of YEBRP on the mutagenicity of sodium azide showed no difference compared to control without YEBRP but that of 2-AF was high In all substrate. (P＜0.01) On the mutagenicity of sodium azide and 2-AF, antimutagenicity of mucopolysaccharide and dietary fiber were high (p＜0.01) in $\alpha$-cellulose and hemicellulose, Antimutagenicity of u-cellulose on the mutagenicity of 2-AF was high at 5 hours reaction time but that was decreased as the reaction time increased.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.119-120
• /
• 2011

Recently, the effects of high temperature and fiber content on the residual mechnical properties of high-strength concrete were experimentally investigated. In this paper, residual mechanical properties of concrete with water to cement (w/c) ratios of 55%, 42% and 32% exposed to high temperature are compared with those obtained in fiber reinforced concretes of similar characteristics with the ranging of 0,05% to 0,20% polypropylene (PP) fibers by volume of concrete, and considered factors include pre-load levels (20% and 40% of the maximum load at room temperature). Outbreak time and water contents were tested and were determined the compressive strength. In the result, it is showed that to prevent the explosive spalling of 50MPa grade concretes exposed to high temperature need more than 0.05Vol.% PP fibers. Also, the cross-sectional area of PP fiber can influence on the residual mechanical properties and the spalling tendency of fiber reinforced concrete exposed to high temperature. Especially, the external loading increases not only the residual mechanical properties of concrete but also the risk of spalling and the brittle tendency.

• Composites Research
• /
• v.16 no.5
• /
• pp.39-44
• /
• 2003

Embedding viscoelastic-damping materials into composites can greatly increase the damping properties of composite structures. Usually viscoelastic-damping materials behave isotropically so that their damping properties are the same in all directions. In these days, there is a desire to develop viscoelastic-damping materials that behave orthotropically so that damping properties vary with material orientation. These orthotropic damping materials can be made by embedding rows of thin wires within the viscoelastic materials. These wires add significant directional stiffness to the damping materials. where the stiffness variation with wire orientation follows classical lamination theory. In this paper, the loss factor of composite laminate was evaluated based on Ni and Adams' theory. To investigate the effect of directional damping material, the low-velociy impact response analysis was also performed. The present analysis results show that directional damping material has a great influence on vibration and damping characteristic of composite laminate.

• Journal of Adhesion and Interface
• /
• v.5 no.4
• /
• pp.9-16
• /
• 2004

Silk fibers were subjected to argon and ethylene plasma treatments in order to improve the interfacial adhesion with polylactic acid (PLA). After the plasma surface treatment, the surface morphology and surface adhesion of silk fibers to the PLA resin were largely changed. Various plasma treatment conditions were used in this work: 10, 25, 50, 100 and 150 W of electric power, 1, 3, 5, 7 and 10 minutes of treatment time, and 10 and 50 sccm of a gas flow rate. The interfacial shear strength of plasma-treated Silk/PLA biocomposites was measured by a single fiber micro-droplet debonding test method. The result provided an optimal plasma treatment condition to obtain the improved interfacial adhesion in the Silk/PLA biocomposites.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1238-1245
• /
• 1988

Friction and wear characteristics of short fiber reinforced and particulate filled composites were investigated experimentally. Two kinds of fiber composites, chopped graphite fiber reinforced PAI(polyamide-imide) and glass fiber reinforced PAI, and a particulate composite, TiO$_{2}$ powder filled PAI, were selected for the friction and wear test since these are important engineering materials based on a new high temperature engineering plastic. All the specimens were cut into proper size for cylinder-on-plate type wear test. Frictional forces were measured by employing a load transducer and wear rates were calculated by measuring weight loss during wear test. The experimental results are reported in this paper and carefully discussed to explain the friction and wear behavior qualitatively. The frictional behavior is interpreted by considering four basic friction components which are believed to the genesis of friction and the wear behavior is explained by applying delamination theory of wear.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.120-121
• /
• 2013

Recently, our country is to be diversification a leisure activity and tourism form by income level rise and traffic circumstance improvement. But Basic facilities expropriated these leisure activities have built an insufficient condition. Also, Building a facility, Introduced tools and materials import the whole quantity. Therefore, In this paper, it builds a tension mooring unit to use EPDM and Kevlar R29 and it develops a domestic marine circumstance through reliability based on robust design. It contributes to marine leisure culture activation and industry development.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.817-822
• /
• 1994

The reinforcing effect of C-shape carbon fiber was investigated as comparing to typical round-shape fiber with similar properties. The results show that C-shape fiber reinforced materials have better in almost all aspects of mechanical properties, or 218% in flexural strength, 223% flexural modulus, 157% interlamina shear strength, 227% impact strength, 184% transverse flexural strength and so on. Also in damping characteristics considerably concerned with fatigue life, friction/wear coefficient of a material, C-CF/EP had about 185% greater. In this research, we present the potential of non-circular fiber reinforcing materials by C-shape carbon fiber.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.176-185
• /
• 2019

Diffusion tensor images were obtained for middle-aged men according to the AUDIT-K scale. As a result of the fractional anisotropy (FA) value of the gyrus nerve fibers in the brain region measured and analyzed by the Tract-Based Spatial Statics, FA values of general drinkers were measured lower than those of estimated alcohol use disabled people. This was statistically significant. In other words, the use of alcohol significantly affects the anatomic microstructural changes measured in the Gyrus of the brain region, and it may damage the nerve fiber tract and affect the functional abnormalities associated with it.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.152-158
• /
• 2022

The purpose of this study is to investigate experimentally the compressive strength and tensile behavior of cement composites reinforced by selvedge short fiber from high performance fabric. Four types of mixtures according to the types of selvedge short fibers were prepared and compressive strength and tension tests were performed. Test results showed that the compressive strength values of composites investigated in this study ranged from 64 MPa to 66 MPa and all composites showed strain-hardening behavior. The tensile strain capacity values of composites ranged from 2.6 % to 2.8 % and multiple cracking behavior was observed in all composites.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.39-43
• /
• 1995

In the culture of Vinyl mulching and Non mulching, growth, yield, and cotton hair's growth are studied at the different planting density to get a basic material for cotton culture and high yield bumper crop in the region of the South. And the results are following. Vinyl mulching is the best one at the strength, the number of boll bearing branches, the num-ber of bolls, the number of bolls per $m^2$ and all the other characters. Vinyl mulching and Non mulching have the greatest number of bolls per $m^2$ at the planting density of 70${\times}$10cm. Vinyl mulching has the highest seed cotton yield and the highest seed cotton yield per boll. Especially when planted at the density of 70${\times}$l0cm, Vinyl mulching and Non mulching have the highest seed cotton yield. Vinyl mulching's value is accepted in fiber length and lint percentage, the wider spacing in the row is, the longer fiber length is.