• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.4
• /
• pp.215-226
• /
• 2022

Significant efforts have been devoted to developing high-performance composite materials by emulating the structure of biological creatures with superior mechanical characteristics. Nacre has been one of the most sought-after natural structures due to its exceptional fracture toughness compared with the constituent materials. However, the effect of manipulating the nacre-like geometry on the impact performance has not been fully investigated thus far. In this study, composites of randomly manipulated nacreous geometry are numerically developed and the impact performance is analyzed. We develop an algorithm by which the planar area of platelets in the nacre-like design is randomly resized. Thereafter, the numerical models of nonuniform nacre-patterned multi-layer structures are developed and the drop-weight impact simulation is performed. The impact behaviors of the model are evaluated by using the ratio of absorbed energy, the von Mises stress distribution, and the impact force-time curve. Therefore, the effect of the geometric irregularity on the nacre-patterned design is elucidated. This insight can be efficiently utilized in establishing the optimum design of the nacre-patterned structure.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.545-552
• /
• 2015

Process modeling and simulation is a powerful methodology to quantitatively predict the change of process variables when operating and design conditions are changed. In this study, considering drawbacks of currently used process simulator for combined cycle plants, we developed process modeling system equipped with an ease of use and flexibility for model development. For this purpose, the analysis of combined cycle processes was carried out and consequently, mathematical models and libraries were developed. Furthermore, in view of the fact that the level of the abstraction of process models depends on the purpose of simulation as well as the available data, simple and rigorous models were also developed for some important units. In use of reference combined plant, we executed process simulation using the developed modeling system and the comparison was made between the results of simulation and the reference data. Less than 1% marginal error was identified and we concluded that the modeling system can be applied for commercial combined cycle processes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.467-470
• /
• 2011

In this study, two different kind of impeller, commercial hand blender and manual type were used to investigate the most effective mixing method for simulant gel propellant. Ionized Water, Carbopol 941 and NaOH were used to produce the simulant gel for temperature of $25^{\circ}C$ and $50^{\circ}C$. The amount of bubbles produced during mixing of simulant gel at $50^{\circ}C$ were higher than that of simulant gel at $25^{\circ}C$. After 24 hours, bubbles of simulant gel made at $50^{\circ}C$ disappeared rapidly with respect to the bubbles of gel made at $25^{\circ}C$. Bubbles from blender did show notable amount even after 24 hours. Among mixing type, it was found that the pitched paddle impeller was the best candidate for the production of simulant gel.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.2
• /
• pp.40-50
• /
• 2008

Most of satellite program process consists of mission analysis, thermal, structure, electronics design, and operation, etc. Each step has several steps like design phase, development phase, and verification phase, etc. As to do this kind of process, very high costs and much time are required, further high risk is included. So for solving those difficulties, satellite developers have designed and used satellite simulator system. In early stage of satellite development, simulator system was just used for a fragment of development and verification, so it could not give enough advantage on satellite development. In order to get high advantage on satellite development, full system level simulators which can be used for several steps for development and verification are evolved. So This paper introduces the trend of simulation systems for satellite development and verification used by several satellite developers.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.903-914
• /
• 2008

This study was undertaken for the production capacity expansion and energy saving through entire process simulation and optimization for the commercial process of manufacturing monoethylene glycol as a staple from ethylene oxide. Aspen $Plus^{TM}$(ver. 2006) was employed in the simulation and optimization work. The multicomponent vapor-liquid equilibria involved in the process were calculated using the NRTL-RK equation. As for the binary interaction parameters required for a total of 91 binary systems, those for 8 systems were self-supplied by the simulator, those for 28 systems were estimated through regression of the VLE data in the literature, and the remainder were estimated with the estimation system built in the simulator. Subsequent to ascertaining the accuracy of the generated parameters through comparison between actual and simulated process data, sensitive variables highly affecting the process were searched and selected using sensitivity analysis tool in the simulator. The optimum operating conditions minimizing the total heat duty of the process were investigated using the optimization tool based on the successive quadratic programming in the simulator.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.952-956
• /
• 2010

저수지에 설치된 물순환장치는 저수지 수문상황과 자연조건의 변화에 따라 유동특성이 상이하므로 연구자가 고려하는 다양한 조건에서 현장 측정하기는 불가능하다. 이런 문제를 대체하는 방안으로 전산유체유동(CFD) 모형을 적용한 모사를 실시함으로서 다양한 조건에 따른 효과를 평가할수 있게 된다. 본 연구에서는 전산유체유동을 통한 대류식 물순환장치의 유동영향범위와 수질변화 등을 평가하고, 다양한 조건에서 모사를 실시하여 최적운영방안을 도출하고 실제운영에 활용토록 하고자 한다. 수체거동을 모사하기 위해 실제 저수지를 형상화한 Domain을 3가지로 구성하였다. 첫번째는 반경 20m, 깊이 40m Domain에 물순환장치를 중앙에 설치한 것이며(D20), 두 번째는 반경 40m, 깊이 40m에 두 개의 물순환장치를 양쪽에 설치하였고(D40), 세 번째는 반경 100m, 깊이 40m로 설정(D100)하였고 양쪽에 두 개의 물순환장치를 설치한 것으로 구성하였다. CFD에 의한 개별 대류식 순환장치의 유동모사결과 D20은 시간의 경과에 따라 수온성층이 하강하는 현상이 나타났으며 이러한 결과로 판단할때 40m 간격으로 대류식 순환장치를 설치하여 운영하면 탈성층이 나타날 수 있을것으로 판단되었다. D40에 대하여 CFD에 의한 유동모사를 실시하였으며 시간의 경과에 따라 수온성층의 변화는 나타나지 않았다. 이러한 결과로 판단할때 40m 간격으로 한줄로 대류식 순환장치를 설치하여 운영하면 성층을 깨는 현상은 나타나지 않을 것으로 평가되었다. 반면 Dye테스트시 심층에서 상승한 수체는 수온성층 표면에서 수평방향으로 계속 퍼져 나가면서 옆장치에서 상승된 수체와 혼합이 활발히 이루어 지는 현상을 나타내었다. 장치간 거리가 100m인 대류식 물순환장치에 의한 유동모사시 수온성층의 변화는 전혀 나타나지 않았으며, Dye테스트시 심층에서 상승한 수체는 수온성층 위에서 수평방향으로 퍼져 나가면서 옆에서 가동되는 장치에서 상승된 수체와 혼합 현상을 나타내기는 하나 D40보다 혼합시간이 더 걸리는 것으로 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.246-246
• /
• 2019

점착성 유사는 비점착성 유사보다 작은 입자 크기를 가지며 전자기적 점착력에 의해 연속적인 응집과 파괴의 과정인 응집현상을 겪는다. 응집현상에 의해 생긴 유사 덩어리를 플럭(Floc)이라고 하며 유사의 응집현상은 점착성 유사가 가지는 입자 크기, 침강속도, 밀도를 변화시킨다. 유사의 이동은 크기, 침강속도, 밀도에 영향을 받는다. 따라서 점착성 유사의 여러 특성에 관여하는 입자의 크기에 대한 충분한 이해는 점착성 유사의 이동을 파악하는 데에 필수적이다. 본 연구에서는 점착성 유사의 여러 특성 중, 입자 크기 분포에 대한 특성을 분석하는 것을 수행하였다. 일반적으로 점착성 유사의 연구에서 입도 분포는 Log-normal 분포로 가정하여 사용되고 있다. 그러나 그 적합성에 대해서는 검증된 바가 없다. 따라서 과거 연구에서 조사된 점착성 유사의 입도 분포 자료를 현장에서 측정된 자료와 실험실에서 측정된 자료로 나누어 수집한 후, 표본에 통계학적인 방법인 적합도 검정을 사용하여 실제 어떠한 분포를 모사하는지 살펴보았다. 적합도 검정은 Kolmogorov- Smirnov (K-S)검정을 이용하였으며 K-S 검정의 결과가 유의수준 5%를 통과하는 경우 가정된 분포가 실제 표본을 잘 모사하는 것으로 판단하였다. 적합도 검정 결과, 점착성 유사의 입도 분포는 현장 실험과 실험실 실험에서 다른 특징을 나타내었다. 현장 실험의 경우 입도 분포의 형태가 지수 분포의 형태를 나타내는 경우가 많았으며 Gamma 분포가 우수하게 모사하였다. 실험실 실험의 입도 분포는 일반적인 양의 왜곡도를 가지는 분포를 그렸으며 GEV 분포와 Gamma 분포가 우수하게 모사하였다. 두 경우 모두 Log-normal 분포가 적합하다고 판단되는 경우는 많지 않았다. 그러나 Log-normal 분포에 위치 매개변수를 추가하여 3 매개변수의 분포로 모사한 경우 유의수준 5%를 통과하는 경우가 크게 증가하였다. 향후에는 점착성 유사의 입도 분포를 모사하고 사용함에 있어 Log-normal 분포를 무조건적으로 이용하는 것은 지양해야할 것으로 판단된다. 2 매개변수의 분포를 점착성 유사의 입도분포로 사용할 경우, Gamma 분포를 추천하며, 기존에 사용되던 Log-normal 분포를 사용할 경우 위치 매개변수를 추가하여 3 매개변수의 Log-normal 분포를 이용할 것을 추천한다. 또한 점착성 유사의 입도를 모사하는 분포를 개발하여 사용한다면 점착성 유사의 이동과 특성을 연구할 때 가장 중요한 크기 특성에 대한 많은 정보를 제공할 수 있다고 판단된다.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.471-479
• /
• 2018

Seonunsa Temple is a site of Dancheong cultural significance in Daewoongjeon. Three-dimensional (3D) scanning can be used to create a simulation in 1:1 ratio without touching the Dancheong patterns directly. The traditional method of recreating Dancheong was paining with tracing paper using a fix pin. However, manual direct copy processes can cause and damage to the objects. This study shows the results of a simulation of a tranditional Dancheong patterns as an alternative; the simulation was able to reduce dimensional errors and prevent damage by using 3D scanning. As a result, objective and precise proportions of the simulation were acquired. The 3D scanning method may be applied for work such as the replication and restoration of the drawing, 3D fabrication of the original data, and printing of the additional drawing. In addition, with the production of 3D materials, a virtual museum is possible.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.6
• /
• pp.388-394
• /
• 2010

In the present study, polyacetal bone mimics with circular cylindrical pores were used to investigate variations of speed of sound and attenuation coefficient with porosity and microarchitecture in bone. The speed of sound and attenuation coefficient of the 6 bone mimics with porosities from 0 % to 65.9 % were measured by a through-transmission method in water, using a pair of broadband, unfocused transducers with a diameter of 12.7 mm and a center frequency of 1.0 MHz. Independently of the structural properties of the bone mimics, the speed of sound decreased almost linearly with the increasing porosity. The attenuation coefficient measured at 1.0 MHz exhibited linear or nonlinear correlations with the porosity, depending on the structural properties of the bone mimics. These results are consistent with those previously published by other researchers using bone samples and mimics, and advances our understanding of the relationships of the ultrasonic parameters for the diagnosis of osteoporosis with the bone density and microarchitecture in human bones.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.571-575
• /
• 2016

Monte Carlo simulations are widely used as the most accurate technique for dose calculation in radiation therapy. In this paper, the GATE6(Geant4 Application for Tomographic Emission ver.6) code was employed to calculate the dosimetric performance of the photon beams from a linear accelerator(LINAC). The treatment head of a Varian 21EX Clinac was modeled including the major geometric structures within the beam path such as a target, a primary collimator, a flattening filter, a ion chamber, and jaws. The 6 MV photon spectra were characterized in a standard $10{\times}10cm^2$ field at 100 cm source-to-surface distance(SSD) and subsequent dose estimations were made in a water phantom. The measurements of percentage depth dose and dose profiles were performed with 3D water phantom and the simulated data was compared to measured reference data. The simulated results agreed very well with the measured data. It has been found that the GATE6 code is an effective tool for dose optimization in radiotherapy applications.