• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.406-410
• /
• 2005

we propose an external cavity laser which can adjust the number of longitudinal laser mode by using a tunable chirped fiber. Bragg grating. By inducing a tunable temperature gradient in a uniform fiber Bragg grating, the bandwidth of the unform fiber Bragg grating can be tuned. With the chirped fiber Bragg grating as an external reflector of the external cavity laser, the number of longitudinal laser mode was able to be tuned from one to two or three modes.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.2
• /
• pp.130-137
• /
• 2012

The underwater glider using conception of Lagrangian method, is a new observation platform to understand the properties of the ocean vertically. In 2011 March, KORDI made a first successful autonomous trip from Hupo to west coast of Uleungdo piloting Littoral Glider of Alaska Native Technology LLC. The journey considered many environmental variables and route vigilantly selected, the glider covered 177 km horizontally and took approximately 6 days (153 hours). Despite the existence of 1 kt eddy current, Sound velocity sampling was conducted from 5 meters and reaching maximum of 200 meters depth at each dive. It successfully collected sound velocity and temperature profile at every 5 seconds totaling up to 1408 profiles using SVT&P sensor. During the flight it was also a mission to check the diverse modes of the glider i.e. spiral, waypoints, heading, drift and hover could function without a defect in a given situation. These modes were thoroughly monitored and it could be considered that the glider handled it well during the flight. As a result of this test flight, it was evident that the given underwater glider could operate under 2kt current environment with users defined heading and depth, also with the payload up to 5 kg without changing internal buoyancy.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.36-38
• /
• 2018

중요부하를 가지고 있는 계통연계 인버터는 계통과의 연결이 끊길 경우 중요부하에 안정적인 전압공급을 위하여 끊김 없는 모드전환 동작이 요구된다. 기존 인버터는 계통연계 시 전류제어모드, 독립운전 시에는 전압제어모드로 운전을 한다. 그래서 모드전환 시 제어기절체로 인한 출력전압에 심각한 과도상태가 발생할 수 있으며 단독운전 검출 전에도 불안정한 전압을 부하에 공급하게 되어 중요부하에 큰 손상을 입힐 수 있다. 본 논문에서는 LCL필터 뿐만 아니라 LC필터 구조에서도 적용이 가능하며, 양방향 운전 시 자율적인 모드전환이 가능한 계통연계 인버터의 모드전환 기법을 제안한다. 제안된 알고리즘은 5kW 시작품을 제작하여 타당성을 검증하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.166.2-166.2
• /
• 2012

국내에서 개발한 고기동 저궤도 위성이 일본 다네가시마 우주센터에서 2012년 5월 18일 발사되었다. 자세제어계는 위성의 임무수행을 완수할 수 있도록 발사 후부터 위성 수명 기간 동안 자세명령을 생성하고 제어 및 결정을 하며, 궤도 조정과 모멘텀 덤핑등의 임무를 수행한다. 이러한 임무 수행을 가능하게 하기 위해 자세제어계는 적절한 센서와 구동기 조합을 사용하여 추력기 기반 안전모드, 궤도 조정을 위한 Del-V Burn 기동 모드, 태양지향 서브모드 및 목표지향 서브모드 등을 설계했다. 고기동 위성의 초기 운용 중 자세제어계는 자세제어계 하드웨어의 초기 구동 및 점검을 수행하고 설계한 각 모드의 기능과 성능 확인을 수행하게 된다. 본 연구는 성공적으로 완료한 자세제어계 하드웨어의 초기 점검 결과를 소개하는 것이 목적이다. 초기 운용은 위성이 발사된 직후 탑재컴퓨터가 깨어나면서부터 시작되는데, 발사 후 최초 접속시 추력기 기반 안전모드에서 태양 획득 성능 및 제어 성능을 확인한 후 정상 상태 모드인 태양지향 자세로 전환하기 위해 자세제어계 하드웨어인 별 추적기, 자기토커, 반작용휠의 초기 구동 및 점검을 수행하였다. 본 연구에서는 각 하드웨어의 초기 구동 점검과 성능 및 기능 요구조건 만족에 대한 성능 분석 결과를 정리하였다.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1273-1278
• /
• 2005

In this thesis, a 2 stage 6-pole bandpass filter(BPF) is designed and implemented by using triple-mode cavity for satellite payload system. The BPF has a 100MHz bandwidth at the center frequency of 14.5GHz(Ku-band) and the response of the filter is the Chebyshev function. The cavity filter uses two orthogonal $TE_{113}$ modes and one $TM_{012}$ mode. The coupling between the adjacent cavityes(intercavity coupling) results in a Chebyshev response and is accomplished by only H-filed component of TE modes. The size and location of intercavity slot is determined by the coupling equation from E- and H-field of TE and TM resonant modes in circular cavity. The 2-stage 6-pole triple-mode cavity BPF has the insertion loss of 2.4dB and the reflection loss of 15dB in the passband. The triple-mode BPF proposed in this thesis can be used as channel filters for satellite payload system and can minimize filter assembly in general wireless communication system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.513-516
• /
• 2011

The dynamic behavior of a small wind-turbine blade was analyzed experimentally. Arrays of fiber Bragg-Grating (FBG) sensors attached along the blade were used to measure the strains of the blade surface. An impact test was performed to estimate the resonance frequencies of the fundamental and higher modes of the cantilever blade system developed for this study. The results were similar to the results for conventional strain gages. However, FBG sensors could sense modes that strain gauges could not sense. The strains obtained from the FBG sensor array were used to estimate displacement-mode shapes of the blade.

• Journal of Broadcast Engineering
• /
• v.12 no.5
• /
• pp.491-502
• /
• 2007

In this parer, we propose an efficient intra prediction mode decision scheme in Scalable Video Coding(SVC) which is an emerging video coding standard as an extension of H.264/MPEG-4 AVC(Advanced Video Coding). The proposed method in base on the characteristic of macroblock smoothness follows the statistical analysis of intra prediction mode in an enhancement layer and it decides a candidate intra prediction mode. We also propose an early termination scheme for Intra_BL mode decision where the RD cost value of Intra_BL is utilized. Simulation results show that the proposed method reduces 54.67% of the computation complexity of intra prediction coding, while the degradation in video quality is negligible; for low QP values, the average PSNR loss is very negligible, equivalently the bit rate increases by 0.011%. For high QP values, the average PSNR loss is less than 0.01dB, which equals to 0.249% increase in bitrate.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.220-227
• /
• 2014

This paper presents a control method of Single-Inductor Dual-Output DC-DC Converter using Common mode feedback and differential feedback loops. To generate duty used for differential mode feedback loop, this paper propose relative sawtooth circuit using current divider circuit which makes ramp signal with variable dead-time. Two outputs of the Single-Inductor Dual-Output DC-DC Converter are specified for 2.8 V and 4.2 V with input voltage 2.5 V. The maximum conversion efficiency of designed SIDO DC-DC Converter is 95% at total output power of 539mW. Cross regulations of Boost1 and Boost2 are 3.57% and 4% each, when increasing twice times output current.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.583-591
• /
• 2012

In this paper, using a folded parasitic patch, a hybrid metamaterial antenna having the enhanced bandwidth is presented. To obtain a broad bandwidth of the antenna, a zeroth-order resonance(ZOR) mode of a mushroom antenna and a $TM_{010}$ mode of a conventional patch antenna are combined. By employing an etched rectangular hole and a folded parasitic patch in the conventional patch antenna, a resonance frequency of the $TM_{010}$ mode can be down-shifted toward that of the ZOR mode without changing the size of the antenna. Therefore, the proposed antenna has broad bandwidth which ranges from the ZOR mode to the $TM_{010}$ mode. As a result, a fractional bandwidth of the proposed antenna is measured as 12 % and a radiation efficiency is above 75 % in whole band.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.631-639
• /
• 2008

This paper reports the mode shapes of Seohae cable-stayed bridge extracted by TDD technique. In order to record total 72 acceleration points in the vertical direction of the bridge deck, a custom made data acquisition system with LAN communication has been especially developed and a set of ambient vibration tests has been conducted. For the measured acceleration responses, total twenty four mode shapes up to 2Hz has been extracted by TDD technique. The extracted mode shapes include many new modes that have not been identified in the current on-line health monitoring system installed in the bridge. It is confirmed that TDD technique is the most effective in extracting the high resolution mode shapes on a particularly long span bridge.