• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.6
• /
• pp.95-107
• /
• 2008

In this paper, we propose a fast mode decision method for temporal and spatial scalability to reduce computational complexity of mode decision that used to be computationally one of the most intensive processes of the MPEG-4 AVC|H.264 SE(Scalable Extension) encoding. For temporal scalability, we propose an early skip method and MHM(mode history map) method. The early skip method confines macroblock modes of backward and forward frames within selected a few candidates. The MHM method utilizes stored information of frames inside a GOP of lower levels for the decision of MHM at higher level. For the spatial scalability, we propose the method that uses a candidate mode according to the MHM method and adds the BL_mode as candidates. The proposed scheme reduces the number of candidate modes to reduce computational complexity in mode decision. The proposed scheme reduces total encoding time by about 52% for temporal scalability and 47% for spatial scalability without significant loss of RD performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8C
• /
• pp.591-597
• /
• 2008

In this paper, we present a improved rate distortion optimization (RDO) for H.264 intra coding. By using new mode decision criteria pass for $I4{\times}4$ in company with the original RDO, the proposed method can achieve the better coding efficiency comparing with the original RDO. Our experimental results show that the proposed algorithm can archive about $0.64{\sim}1.6578%$ bit rate decrease at the same PSNR and $0.049{\sim}0.101dB$ PSNR increase at the same bit rate.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.268-272
• /
• 2006

We have demonstrated the selection and the amplification of the components of an optical frequency comb using femto-second laser injection-locking technique. We used a mode-locked Ti:sapphire laser as a master laser and a single-mode diode laser as a slave laser. After passing through the interference filter with the center wavelength 794.7 nm and the transmittance bandwidth 1.5 nm, the optical frequency comb by mode-locked femto-second laser was injected into the slave laser. The injection-locked slave laser had $3{\sim}4$ multi-mode with the mode spacing 100.5 MHz, whichcorrespond to the repetition rate of a mode-locked Ti:sapphire laser. The power of the modes selected by femto-second laser injection-locking technique was amplified to several thousands times

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.279-286
• /
• 2015

EMD is a fully data-driven signal processing method without using any predetermined basis function and requiring any user parameters setting. However EMD experiences a problem of mode mixing which interferes with decomposing the signal into similar oscillations within a mode. To overcome the problem, EEMD method was introduced. The algorithm performs the EMD method over an ensemble of the signal added independent identically distributed white noise of the same standard deviation. Even so EEMD created problems when the decomposition is complete. The ensemble of different signal with added noise may produce different number of modes and the reconstructed signal includes residual noise. This paper propose an modified EEMD method to overcome mode mixing of EMD, to provide an exact reconstruction of the original signal, and to separate modes with lower cost than EEMD's. The experimental results show that the proposed method provides a better separation of the modes with less number of sifting iterations, costs 20.87% for a complete decomposition of the signal and demonstrates superior performance in the signal reconstruction, compared with EEMD.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.463-468
• /
• 2021

In this paper, when a refractive index grating and a gain grating were simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, a dielectric film coating was applied so that reflection did not occur on the right mirror surface, so that 𝜌_r=0. In case of 𝛿L>0, the characteristics of the oscillation frequency and oscillation gain were analyzed. When the grating phase of the left mirror surface continues to decrease from 𝜋, the graph lines of each mode gradually shift to the left. In case of 𝜅L=10, the threshold gain of the oscillation mode is the lowest. In this case, the mode selectivity is relatively low. From 𝜅L=0.5 to 𝜅L=6, the mode selectivity and the frequency stability are excellent. In the case of DFB lasers with an anti-reflection coated mirror, the threshold gain of the oscillation mode increases but the mode selectivity is about twice as excellent, compared with DFB lasers of having two cleaved facets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7C
• /
• pp.697-705
• /
• 2009

This paper presents the theoretical tag-reading speed in the ASK and the PJM mode of a 13.56MHz RFID system which have been adopted in the international standard ISO 18000-3, along with simulation results to support the mathematical analysis. Through the analysis using the number of tag-dependent Q-algorithm, which was known to give relatively fast reading speed, we not only derive the number of slots to read out given tags, but compare the reading speeds of the ASK with that of the PJM mode. Moreover, we present the numerical comparison of two modes which bring the equivalent results as in the theoretical one.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.71-80
• /
• 2001

In order to consider the sediment layer's effect to total acoustic field, we composed a 3 layered fluid model of 2 sediment layers by adding an additional layer to the Pekeris model and found solutions by using Green's function, boundary conditions and Sommerfeld radiation condition. The modes were divided into discrete modes and virtual modes, and confirmed that the characteristic equation to find discrete modes was same as that of Tolstoy and Clay for normal modes. Also, we confirmed that under similar conditions the 3 layered model showed same results as that of Pekeris model. We believe this 3 layered model can be used to study the sediment's effect on the virtual mode of near field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1095-1101
• /
• 2007

For the cognitive radio (CR) systems sharing the spectrum with narrowband primary devices, this paper presents a fractional bandwidth (FBW) mode utilizing a variable portion of the system band to avoid the interference to or from the primary devices. For the method, the preamble and FBW mode detection algorithm are provided to obtain the FBW mode information during the synchronization. Simulation results in wireless regional area network (WRAN) environments reveal that the FBW mode can be detected reliably without any deterioration of the synchronization performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.3
• /
• pp.246-253
• /
• 1996

In this paper, a problem that occurred in the telegraphist equation established by mode conversion method is solved as analysis tapered transmission line is applied to a waveguide taper. After comparing and analyzing the taper function with variant properties, we select on of taper functions not only that is easily designed but also that have good properties. And then we propose the applicant method to design the waveguide taper and deal with the design of mode transducer between rectangular waveguide and circular waveguide. The measured results of scattering coefficients for the mode transducer fabricated with designed data are agreed well with the theoretical results and the validity of the proposed design and analysis method has been confirmed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.2
• /
• pp.116-122
• /
• 2016

The performance characteristics of a TBCC engine considering the transition mode from a turbojet to a ramjet engine has been investigated. The performance of each engine was proposed and a transition mode of the TBCC engine has been evaluated by adjusting the operating rate of the ramjet engine and turbojet engine performance changes continuously. Based on the transition model, it was confirmed that the performance is continuously changed at various flight Mach numbers and altitudes. The performance characteristics including thrust and specific impulse considering various flight conditions and transition mode were analyzed, which testifies characteristics of the engine itself, as well as transition of the combined cycle.