• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.152-161
• /
• 2008

We investigate that when we restrict the encoding modes on the enhancement layer based on that of the base layer exploiting the high correlation between the best modes at base and enhancement layers, we should determine the set of surviving search modes to yield the minimum excessive RD-cost caused by the restriction. Based on these sets, we implement a fast mode decision algorithm for H.264 Scalable Extension (SE). Simulation results show that the proposed algorithm is superior in the sense of the RD-performance to the conventional mode restriction method which is based on the conditional probabilities of the best modes.

• Journal of Korea Multimedia Society
• /
• v.13 no.2
• /
• pp.185-195
• /
• 2010

In this paper, we propose an efficient inter and intra prediction algorithms for fast encoding of H.264/AVC. First, inter prediction mode decision method decides early using temporal/spatial correlation information and pixel direction information. Second, intra prediction mode decision method selects block size judging smoothness degree with inner/outer pixel value variation and decides prediction mode using representative pixel and reference pixel. Lastly, adaptive motion search region restriction sets search region using mode information of neighboring block and predicted motion vector. The experimental results show that proposed method can achieve about 18~53% reduction compared with the existing JM 14.1 in the encoding time. In RD performance, the proposed method does not cause significant PSNR value losses while increasing bitrates slightly.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.86-90
• /
• 2014

A DC-DC Converter operates in CCM(Continuous Coundcution Mode), DCM(Discontinuous Conduction Mode), CRM(Critical Conduction Mode). The CRM is boundary between CCM and DCM. If a DC-DC converter is designed to operate in CRM, its inductor volume can decrease and power loss which caused by switch and diode can decrease. In this paper, the DC-DC converter which operates in CRM is applied to a solar array regulator(SAR) for the satellite. The switching frequency of the CRM boost SAR changes according to input and output condition. The switching frequency limit logic is applied to limit the maximum switching frequency. Meanwhile, the small signal transfer function of the CRM boost SAR is simple, so the controller design is also simple. In this paper, the small signal transfer function from control reference to solar array voltage is induced. And the voltage controller is designed based on the small signal transfer function. Finally, the CRM boost SAR is verified by simulation.

• Review of KIISC
• /
• v.31 no.6
• /
• pp.37-40
• /
• 2021

미국, 중국 등에 이어 국내에서도 KT에서 2021년 7월 5G 단독모드(StandAlone)를 상용화 하였다. 5G 비단독모드(Non-StandAlone)에서는 다년간 사용되었던 기존 LTE(Long Term Evolution) 망의 장비를 재활용하기 때문에 신규 장비의 도입은 5G 기지국으로 제한된다. 그러나 5G 단독모드에서는 새롭게 정의된 5G 장비들을 사용하기 때문에 이에 대한 위협 분석과 보안 기능의 정의에 따라 각 장비에 보안의 구현이 제대로 되어 있는지 검증하는 절차가 요구된다. 이러한 환경에서 본 논문은 5G 단독모드 기기의 보안 인증 현황을 제공하고자 한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.174-175
• /
• 2013

HEVC의 화면내 예측 부호화는 예측 모드를 최대 35개까지 확장함으로써 기존H.264/AVC에 비해서 향상된 부호화 효율을 갖는다. 반면 화면내 부호화의 복잡도 또한 크게 증가하여 복잡도 감소를 위한 고속 부호화 기법이 요구된다. HEVC의 차조모델인 HM에서는 화면내 부호화 고속화를 위해 RMD(Rough Mode Decision) 과정을 통하여 후보 모드를 결정하고 선택된 후보 모드에서 초종 예측 모드를 결정한다. 본 논문에서는 화면내 부호화의 복잡도 감소를 위하여 고속 화면내 예측 모드 결정 기법을 제시한다. 본 기법은 후보 모드를 결정하기 위한 RMD 과정에서의 탐색 모드 수와후보 모드로부터 최종 모드를 결정하기 위한 탐색 모드 수를 제한하는 방법을 결합하여 모드 결정을 위한 복잡도를 감소한다. 본 제안 기법은 실험결과 HM 12.0대비 1.0%의 비트 증가로 13.19%의 복잡도를 감소시킬 수 있었다.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.8
• /
• pp.1075-1088
• /
• 2001

In this paper, we propose a method for dynamic selection of unrestricted motion vector(UMV) or default prediction mode(DPM) in H.263 bit stream. For this, we use the error of compensated image and the magnitude of motion vector. In the proposed strategy, the UMV mode is dynamically applied in a frame according to average magnitude of motion vector and error of compensated image. This scheme has improved the quality of image compared to the fixed mode UMV or DPM only. Number of searching points are greatly reduced when comparing to UMV The proposed method is more profitable to long video sequences having camera movement locally.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.7
• /
• pp.997-1014
• /
• 2001

In this paper, we propose a method for dynamic selection of unrestricted motion vector(UMV) or default prediction mode(DPM) in H.263 bit stream. For this, we use the error of compensated image and the magnitude of motion vector. In the proposed strategy, the UMV mode is dynamically applied in a frame according to average magnitude of motion vector and error of compensated image. This scheme has improved the quality of image compared to the fixed mode UMV or DPM only. Number of searching points are greatly reduced when comparing to UMV. The Proposed method is more profitable to long video sequences having camera movement locally.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.4
• /
• pp.81-87
• /
• 2003

In this paper, the feasibility of using Shannon's sampling theorem to reconstruct exact mode shapes of a structural system from a limited number of sensor points and localizing damage in that structure with reconstructed mode shapes is investigated. Shannon's sampling theorem for the time domain is reviewed. The theorem is then extended to the spatial domain. To verify the usefulness of extended theorem, mode shapes of a simple beam are reconstructed from a limited amount of data and the reconstructed mode shapes are compared to the exact mode shapes. On the basis of the results, a simple rule is proposed for the optimal placement of accelerometers in modal parameter extraction experiments. Practicality of the proposed rule and the extended Shannon's theorem is demonstrated by detecting damage in laboratory beam structure with two-span via applying to mode shapes of pre and post damage states.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.9-15
• /
• 2009

In this paper, we invented a new structure of fast ATC(Automatic Threshold Control) circuit. Using the structure we made a new burst-mode limiting amplifier with fast ATC function using commercial $0.8{\mu}m$ BiCMOS technology. It's ATC function worked so fast that even the first bit of burst-data could be detected, which confirmed that the new structure was useful for fast ATC. However, in the beginning of a burst, distortions in duty-cycle occurred and increased up to 59% of duty-cycle as amplitude of input signal increased. But we confirmed that after 10 cycles passed, duty-cycles was staying below 52% of duty-cycle for any magnitude of input signal.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.2
• /
• pp.53-63
• /
• 2002

The steady-state and transient performance simulation program for a turboprop engine(PT6A-62) was developed. Specially this program included some algorithms, such as flat-rated behaviors in performance and limit control algorithms to prevent the compressor surge and the compressor-turbine inlet limit temperature overshoot. In order to minimize analysis errors, on interpolation method in component characteristics using matching errors and specific heat and specific heat ratio, which are functions of temperatures were used. The developed steady state performance analysis program can handle various conditions such as altitude, bleed extraction, inlet temperature and pressure and part throttle, and the transient performance analysis program incorporated a general mode for transient simulation and a control mode for prevention of the compressor surge and the turbine inlet limit temperature overshoot.