• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.58.2-58.2
• /
• 2017

2013년 청소년 교육목적으로 개발된 고흥전파간섭계시스템을 활용하여 청소년으로 하여금 전파관측을 체험케하고, 전파천문학 연구 기회를 제공하고자 한다. 안정된 단일경 전파관측과 간섭계모드 전파관측을 위해 현 시스템이 갖추어야 할 기능을 개선하고 있다. 보다 정밀하게 관측대상을 추적하고, 전파 점광원을 관측할 수 있도록 새로운 전파관측시스템을 개발한다. 정밀한 관측대상 추적과 함께 데이터 취득 시간을 확장하여 점광원 관측이 가능하게 되면, 청소년에게 전파관측 및 전파간섭원리와 관측방법을 실험체험 프로그램으로 전해 줄 수 있다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1988.06a
• /
• pp.112-116
• /
• 1988

Homodyne 방식으로 동작하는 광섬유 간섭계 센서는 주위 온도의 변화나 진동등에 의하여 시노의 크기가 불규칙하게 변화된다. 따라서 광섬유 간섭계가 직작조건에서 동작하도록 하여 감도를 최대로 유지시켜야 한다. 본연구에서는 원통형 압전자소자에 단일모드 광섬유룰 감아서 변환율 K=1.07$\pi$/V의 위상변조기를 만들고, 이를 이용하여 능동위상추적(active phase tracking)방식의 신호안정화 장치를 제작하고 광섬유 간섭계 센서의 공기중 읍압반응을 조사하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.5
• /
• pp.485-493
• /
• 2002

Broadband interference patterns are studied using ship as an acoustic source in shallow waters with varying bathymetry. Waveguide invariant index (β) indicating the pattern of constructive (or destructive) interference in range-frequency domain is derived in a waveguide with constant bottom slope based on adiabatic mode theory. Using this invariant, changes of the interference patterns resulting from the variation of bottom bathymetry are analyzed. Results of the analytic interpretation is compared with those from sea experiments and numerical simulations.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1987.11a
• /
• pp.20-23
• /
• 1987

• Proceedings of the Optical Society of Korea Conference
• /
• 1998.08a
• /
• pp.156-157
• /
• 1998

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.402-403
• /
• 2011

EMI 필터 설계 시 주로 사용되는 공통모드 초크의 경우 자화 인덕턴스로부터 공통모드 노이즈 감쇠를, 누설 인덕턴스로부터 차동모드 노이즈 감쇠를 기대할 수 있다. 이때, 누설인덕턴스가 너무 클 경우 차동모드 노이즈 감쇠에는 우수하지만, 전기/전자제품이 슬림화됨에 따라 공통모드 초크의 누설 자속과 전원공급기를 덮고 있는 금속덮개 사이에 자계 간섭에 의한 진동/소음문제가 발생될 수 있다. 본 논문에서는 누설자속을 조절할 수 있는 공통모드 초크의 코어형상 및 권선기법을 제안한다. 제안된 방법은 진동 및 소음을 제어할 수 있는 장점을 지니고 있다.

• Korean Journal of Optics and Photonics
• /
• v.31 no.2
• /
• pp.105-110
• /
• 2020

A compact beam combiner based on two-mode interference (TMI) in multimode waveguides is proposed, and its feasibility is shown through simulation with the three-dimensional beam propagation method. The input waveguides are separated by about 1 ㎛ at the interface with the multimode waveguide, so that the fabricated waveguide pattern is well repeated. The power transmission to the output port from the red, green, and blue input port is 93.5%, 94%, and 93%, respectively. When the wavelength deviation from a center wavelength is 10 nm, the power transmission is maintained to be greater than 90%. When the waveguide width error is 40 nm, the power transmission is maintained to be greater than 85% for all the three colors. The polarization dependence of the beam combiner is almost negligible, and its size is as tiny as 0.02 × 4 ㎟.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.130-135
• /
• 2000

In this study the vibration behavior of the stiffened double cylinder was experimently analyzed. Due to the complex structure of the double cylinder the outside cylinder frequency responses to the exciting forces applied on various posi-tions were analyzed by using spectrum analyzer in conjunction with an accelerometer and the natural frequencies were obtained. The technique of time-averaged holographic interferometry is applied to study the vibration characteristics of outside cylinder with stiffening T frame. The experimental data showed that the T frame had salient effect of damping on the testing structure at most of resonances. however the experimental results also revealed interesting phenomenon. At some particular frequencies the T frame. The experimental data showed that the T frame had salient effect of damping on the testing structure at most of resonances. However the experimental results also revealed interesting phenomenon. At some particular frequencies the T frame seemed to behave as a transmitter. In addition it has been successfully demon-started that optical method such as holographic interferometry is well suited for the identification of mode shapes. They can give us a whole-field non-contact measurement instead of the point-wise measurement by accelerometer in classical modal testing.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.418-422
• /
• 2000

In this paper, we have modeled and fabricated a mutimode interference (MMI) $1\times4$ optical power splitter using finite-difference beam propagation method and $Ag^+-Na^+$ ion-exchanged method in BK7 glass. The power splitting ratio of the fabricated MMI $1\times4$ optical power splitter shows 0.46 dB..46 dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.101-104
• /
• 2002

The beam splitter is important in optical communication systems. in this work, thc quasi-state based on four-mode interference in thc MMI coupler is proposed, and so, device length is shorten to be 1/5 of general designed length. We designed thc polarization splitter based on thc concept of quasi-state. Thc analysis has been accomplished by thc effective index method(EIM) and thc mode propagation analysis(MPA) for given structure.