• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.174-184
• /
• 2001

Wavelength tunable fiber ring laser can be tuned by causing a resonance on the optical path having the least loss which is controlled by a polarization adjustment. It is observed that lasing wavelengths having 1 nm FSR(Free Spectral Range) can be tuned over the range of 1540~1560 nm when a polarization controller and an intra-cavity polarizer are adjusted. The tuning mechanism can be expected by analyzing the characteristics of the laser output using an optical path model and the concept of a birefringence loss. It is found that the constructive interference between longitudinal modes of different optical paths may cause wavelength tuning in the fiber ring laser.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.3
• /
• pp.197-205
• /
• 2004

This paper represents the results of interpretation on the cause of sign changing of the striation slopes appearing in the range-frequency domain spectrogram of ship-radiated noise measured in a shallow sea. Striation patterns and dispersion characteristics simulated from a numerical model based on mode theory at various seabed conditions show that the sign changing of the striation slopes appearing in measured signal is caused by the shear property of seabed. more specifically by the shear property of the basement lying below the sediment which is estimated about 3±1m thick.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.137-142
• /
• 2003

In this study, the propagation behavior of fatigue crack effected hole defects was investigated under mixed-mode I+II loading. To create mixed-mode stress field at crack tip, the compact tension shear (CTS) specimen and loading device were used in this tests. The propagation experiments of fatigue crack were performed by changing of the loading application angle(${\phi}$) and the distance(L) estimated from pre-crack tip to hole center located side by side by side with a pre-crack. As L changes, the variation for propagation aspect of fatigue crack, fatigue life and crack propagation rate were examined under mixed-mode loading. Under mixed-mode loading, the propagation rate of fatigue crack increased while the propagation direction changed dramatically because of the interference of hole defects.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.53-57
• /
• 2009

녹산국가산업단지는 부산광역시에서 서쪽의 연안매립지 형태의 공업단지이며, 이 지역은 1990년대 초반부터 약 10여년간에 걸쳐 산업단지가 조성되었다. 녹산국가산업단지는 연안 매립에 따른 연약지반으로 인하여 지반침하현상이 지속적으로 발생하고있으며, 이와 같은 이유로 2000년대 초반에는 침하계를 이용하여 지반침하현상을 관측하였다. 레이더 차분간섭도를 이용한 지표변위는 침하계 자료와의 비교 및 분석을 통하여 연구지역의 지반침하현상을 지속적으로 관측할 수 있으며, 실측 자료가 획득되지 못한 2000년대 중반과 후반의 지반침하현상도 측정할 수 있는 장점을 지니고 있다. 이번 연구는 2002년부터 2003년까지 획득된 RADARSAT-1 F4 fine-bem모드와 2004년부터 2007년까지 획득된 ENVISAT IS-2모드를 이용하여 2000년대 초반부터 후반까지의 녹산국가산업단지의 지반침하현상을 관측하고 이를 분석하는데 있으며, 관측결과 약 4년동안 최대 33 cm의 침하량을 보이는 곳도 있었다. 이 결과는 C-band 레이더 위성자료의 차분간섭도가 국가 주요시설물 지역의 지반침하 측정에 유용한 정보를 제공할 수 있는 중요한 사례가 될 것이다.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.55-61
• /
• 2018

본 연구는 시각 동기 위상 측정 정보를 이용하여 전력계통에 나타나는 여러 가지 동요 현상을 검출하기 위한 기초 연구로써, 시계열 데이터 분석 분야로 분류된다. 제시한 방법은 비선형 동특성에 해석 기반으로 접근하여 전력계통에 나타날 수 있는 여러 동요 현상을 범용적으로 검출해 낼 수 있다. 비선형 동요 현상의 신호적 패턴을 수학적으로 기본 순시치 파형으로부터 피크치 샘플링을 통해 전개하여 계통 요소간 간섭으로 인한 원하지 않는 진동 모드를 검출하고자 한다. 계통의 변화로 진동 모드가 나타날 때, 2차원 평면에 실효치로 환산한 시계열 전압 데이터와 선형화된 플로퀘트 상수(Floquet multiplier)를 맵핑하여 도시하고, 정상상태 지점으로부터 거리를 계산하여 최대 리아프노프 지수 계산을 통해 계통이 불안정하게 되는 시간을 시계열 데이터 분석으로 추정하는 것이 본 방법의 핵심이다. 이러한 접근으로 제시한 비선형 동요 검출 알고리즘을 적용하여 디지털 필터 적용 또는 주파수 영역 해석과 같은 오프라인 Study와 달리 온라인으로 신속하게 계통의 현재 상태를 알 수 있게 된다.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.1143-1153
• /
• 2018

For TOPS InSAR processing, high-precision image co-registration is required. We propose an image co-registration method suitable for the TOPS mode by comparing the performance of cross correlation method, the geometric co-registration and the enhanced spectral diversity (ESD) matching algorithm based on the spectral diversity (SD) on the Sentinel-1 TOPS mode image. Using 23 pairs of interferometric pairs generated from 25 Sentinel-1 TOPS images, we applied the cross correlation (CC), geometric correction with only orbit information (GC1), geometric correction combined with iterative cross-correlation (GC2, GC3, GC4), and ESD iteration (ESD_GC, ESD_1, ESD_2). The mean of co-registration errors in azimuth direction by cross correlation and geometric matching are 0.0041 pixels and 0.0016 pixels, respectively. Although the ESD method shows the most accurate result with the error of less than 0.0005 pixels, the error of geometric co-registration is reduced to 0.001 pixels by repetition through additional cross correlation matching between the reference and resampled slave image. The ESD method is not applicable when the coherence of the burst overlap areas is low. Therefore, the geometric co-registration method through iterative processing is a suitable alternative for time series analysis using multiple SAR data or generating interferogram with long time intervals.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.5-9
• /
• 2004

In this paper, we studied the OCT(Optical Coherence Tomography) system which it has been extensively studied because of having some advantages such as high resolution cross-sectional images, low cost, and small size configuration. A basic principle of OCT system is Michelson interferometer. The characteristics of light source determine the resolution and the transmission depth. As a results, the light source have a commercial SLD with a central wavelength of 1,285 nm and FWHM(Full Width at Half Maximum) of 35.3 nm. The optical delay line part is necessary to equal of the optical path length with scattered light or reflected light from sample. In order to equal the optical path length, the stage which is attached to reference mirror is moved linearly by step motor And the interferometer is configured with the Michelson interferometer using single mod fiber, the scanner can be focused of the sample by using the reference arm. Also, the 2-dimensional cross-sectional images were measured with scanning the transverse direction of the sample by using step motor. After detecting the internal signal of lateral direction at a paint of sample, scanner is moved to obtain the cross-sectional image of 2-demensional by using step motor. Photodiode has been used which has high detection sensitivity, excellent noise characteristic, and dynamic range from 800 nm to 1,700 nm. It is detected mixed small signal between noise and interference signal with high frequency After filtering and amplifying this signal, only envelope curve of interference signal is detected. And then, cross-sectional image is shown through converting this signal into digitalized signal using A／D converter. The resolution of the OCT system is about 30$\mu\textrm{m}$ which corresponds to the theoretical resolution. Also, the cross-sectional image of ping-pong ball is measured. The OCT system is configured with Michelson interferometer which has a low contrast because of reducing the power of feedback interference light. Such a problem is overcomed by using the improved inteferometer. Also, in order to obtain the cross-sectional image within a short time, it is necessary to reduce the measurement time for improving the optical delay line.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1108-1115
• /
• 2004

A new type of a Rotman lens is presented in this paper fur millimeter-wave applications, such as collision avoidance radar. A dielectric slab Rotman lens is proposed to reduce the conductor loss and to create an appropriate farm for favorable implementation at millimeter-wave frequency. The proposed lens consists of a dielectric slab and slot lines whereas the conventional lenses are constructed with parallel conducting plates. The dielectric slab Rotman lens excited in TE$\_$0/ mode shows a high degree of confinement for the fields, low dispersion, and has an appropriate feed structure. A prototype lens has been designed and fabricated with 9 beam ports and 9 array ports together with 9 tapered slot antennas. This lens has been tested in the range from 10 GHz to 15 GHz and the measured beam widths are about 15$^{\circ}$ at 13 GHz. The measurements also show low mutual coupling between beam ports and an efficiency of about 34.6 %. The overall performance is comparable to that of conventional Rotman lenses even though the prototype was tested at lower than desired frequencies in the microwave frequency range due to our limited resources for fabrications and measurements. It is expected that at millimeter-wave frequency the dielectric slab Rotman lens will have lower conductor loss and lower mutual coupling than conventional Rotman lenses.an lenses.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.33-41
• /
• 2008

As RFID technology is developing and increasingly being used in many applications, the implementation is changing from single reader to multiple readers even dense readers. Since the number of readers is increasing, there are more collisions between readers and much interference between readers and tags. Therefore, to avoid interference or collision, many algorithms have being proposed, such as Gen2 dense mode, LBT(listen before talk), TDMA based method. In this paper, we propose a null frame algorithm, which calculates the collision probability in frame slotted aloha scheme and use this information to avoid the possible collisions. Comparing with conventional scheme, our proposed algorithm has some advantages in terms of reader collision number and required frame numbers.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.751-759
• /
• 2008

In this study, the effect of an unsteady flow field around a body of aerostatic/aerodynamic forces were investigated using rectangular cylinders (B/D = 2, 3, 4, 5). Proper orthogonal decomposition (POD) was introduced to the analysis of the fluctuating pressure field that was measured on the stationary/oscillatory B/D=4 rectangular cylinder, and the characteristics of the proper functions with flow patterns were identified. In addition, the physical decoupling and interactions in the different co-existing flow patterns were investigated through POD. The comparison with the identified proper function associated with a particular flow pattern revealed that the Karman vortex is almost not affected by the separation bubble, but that the Karman vortex considerably interferes in the development of the separation bubble around the trailing edge. It can be considered that the Karman vortex induces the increment of the curvature of the substantial separated flow.