• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.462-462
• /
• 2015

이 논문에서는 시 공간적 토양수분 변화를 파악하기 위해 다년간 축적된 실측 토양수분 데이터를 이용하여 단변량 시계열 분석을 하였다. 지형에 따른 토양수분 변화를 알아보기 위해 경기도 파주에 위치한 설마천 유역의 산지사면 중 한 단면을 선정하였으며, 깊이에 따른 변동성은 깊이 10cm와 30cm에서 측정한 토양수분 데이터를 이용하여 분석하였다. 또한, 연도별 토양수분의 변화를 파악하고 토양수분을 예측하기 위해 2010-2013년의 토양수분 데이터를 일단위로 단변량 모델링을 시도하였다. 그 결과, 연도별 변화에 따른 경향성은 보이지 않았으며 대부분의 지점에서 ARMA(1, 1) 또는 ARMA(1, 0) 모형으로 모의되었다. 2시간 간격의 1-2개월 단기간 토양수분 데이터를 모의한 선행연구와 달리 본 연구에서는 낮은 차수의 모형을 보였다. 지형적 토양수분 거동을 살펴보면 상부사면에 위치하고 있는 지점에서는 모두 ARMA(1, 1)로 표현되지만 하부사면에 위치한 지점들은 연도나 심도에 따라 ARMA(1, 0)으로 모의된다. 단변량 모형의 정확도를 알아보기 위해 R2와 RMSE를 비교하였다. 10cm 깊이에서는 경향성을 보이지 않으나, 30cm 깊이에서는 사면하부로 갈수록 R2는 작아지고 RMSE는 커져, 하부사면에서의 모델링이 상부사면에 비해 정확도가 낮음을 보였다. 또한 2012년 토양수분 자료를 이용하여 2013년 토양수분을 예측하기 위해 2012년 매개변수와 2013년 전일 데이터를 이용하여 예측하고자 하는 일단위 토양수분을 구하였다. 그 결과 $R^2=0.646-0.807$, RMSE=1.758-4.802의 정확도를 나타냈다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.619-628
• /
• 2009

LiDAR has capability of rapid data acquisition and provides useful information for reconstructing surface of the Earth. However, Extracting information from LiDAR data is not easy task because LiDAR data consist of irregularly distributed point clouds of 3D coordinates and lack of semantic and visual information. This thesis proposed methods for automatic extraction of buildings and 3D detail modeling using airborne LiDAR data. As for preprocessing, noise and unnecessary data were removed by iterative surface fitting and then classification of ground and non-ground data was performed by analyzing histogram. Footprints of the buildings were extracted by tracing points on the building boundaries. The refined footprints were obtained by regularization based on the building hypothesis. The accuracy of building footprints were evaluated by comparing with 1:1,000 digital vector maps. The horizontal RMSE was 0.56m for test areas. Finally, a method of 3D modeling of roof superstructure was developed. Statistical and geometric information of the LiDAR data on building roof were analyzed to segment data and to determine roof shape. The superstructures on the roof were modeled by 3D analytical functions that were derived by least square method. The accuracy of the 3D modeling was estimated using simulation data. The RMSEs were 0.91m, 1.43m, 1.85m and 1.97m for flat, sloped, arch and dome shapes, respectively. The methods developed in study show that the automation of 3D building modeling process was effectively performed.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.125-139
• /
• 2014

In this paper, I propose a response modeling with a Semi-Supervised Support Vector Regression (SS-SVR) algorithm. In order to increase the accuracy and profit of response modeling, unlabeled data in the customer dataset are used with the labeled data during training. The proposed SS-SVR algorithm is designed to be a batch learning to reduce the training complexity. The label distributions of unlabeled data are estimated in order to consider the uncertainty of labeling. Then, multiple training data are generated from the unlabeled data and their estimated label distributions with oversampling to construct the training dataset with the labeled data. Finally, a data selection algorithm, Expected Margin based Pattern Selection (EMPS), is employed to reduce the training complexity. The experimental results conducted on a real-world marketing dataset showed that the proposed response modeling method trained efficiently, and improved the accuracy and the expected profit.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.85-86
• /
• 2022

화재 발생 시 많은 인명 및 재산피해가 발생하는 물류시설의 경우 이러한 화재안전성 강화가 필요하며 이를 위해서는 현장조사를 기반으로 하는 기초데이터 수집과 2D CAD및 적재 3D 모델링 데이터 구축 등 종합적인 화재안전 데이터가 필요하다. 이에 본 연구에서는 물류시설 화재안전성 강화를 위해 필요한 기반데이터를 제공하기 위하여 현장조사 데이터를 기반으로 화재안전 DB를 구축하였다. 20개소 이상의 물류시설 현장 데이터를 조사한 결과 유지관리상태가 양호하거나 다소 미흡한 실태를 파악하였다. 이러한 현장 조사 데이터를 기반으로 화재안전정보를 도면화하고 이를 3D 모델링을 통한 데이터셋을 구축하여 화재안전관리 기술개발에 필요한 데이터를 수집 및 가공하여 제공하였으며, 이를 통해 향후 물류시설의 화재 안전성 및 위험도 관리 기술 개발을 위해 적극 활용할 예정이다

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2603-2609
• /
• 2014

Reliability analysis of mechanical systems requires statistical modeling of input random variables such as distribution function types and statistical parameters that affect the performance of the mechanical systems. Some random variables are correlated, but considered as independent variables or wrong assumptions on input random variables have been used. In this paper, joint distributions were modeled using copulas and Bayesian method from limited number of data. To verify the proposed method, statistical simulation tests were carried out for various number of samples and correlation coefficients. As a result, the Bayesian method selected the most probable copula types among candidate copulas even though the candidate copula shapes are similar for low correlations or the number of data is limited. The most probable copulas also yielded similar reliabilities with the true reliability obtained from a true copula, so that it can be concluded that the Bayesian method provides accurate statistical modeling for the reliability analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.87-94
• /
• 2017

Reliability analysis(RA) and Reliability-based design optimization(RBDO) require statistical modeling of input random variables, which is parametrically or nonparametrically determined based on experimental data. For the parametric method, goodness-of-fit (GOF) test and model selection method are widely used, and a sequential statistical modeling method combining the merits of the two methods has been recently proposed. Kernel density estimation(KDE) is often used as a nonparametric method, and it well describes a distribution function when the number of data is small or a density function has multimodal distribution. Although accurate statistical models are needed to obtain accurate RA and RBDO results, accurate statistical modeling is difficult when the number of data is small. In this study, the accuracy of two statistical modeling methods, SSM and KDE, were compared according to the number of data. Through numerical examples, the RA results using the input models modeled by two methods were compared, and appropriate modeling method was proposed according to the number of data.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.359-366
• /
• 2013

In this paper, we studied how the data obesity can affect in which the response speed of database gradually slows down. Our research is performed by analyzing how the game data infrastructure is well-formed. Although there are a variety of ways to evaluate to measure the level of infrastructure, we performed with real information system. We analyzed data obesity by comparing the entity-relationship models between the products of real game information system and newly modeled databases. We could find data obesity is over 60% among overall average of game information system. It shows that 45% higher than standard obesity which is 15%. In this paper, data redundancy rate after performing the procedure of the data modeling was 41% resulting in an improvement of 23% compared to 64% of an existing model.

• Proceedings of the Korean Society for Information Management Conference
• /
• 2014.08a
• /
• pp.149-152
• /
• 2014

본 연구에서는 저자명 모호성 해소를 위해 토픽모델링 기법을 사용하여 저자명을 식별 하였다. 기존의 토픽모델링은 용어 자질만을 고려하였지만 본 연구에서는 제 3의 메타데이터 자질을 활용하여 ACT(Author-Conference Topic Model) 모델과 DMR(Dirichlet-multinomial Regression) 토픽모델링을 대상으로 저자명 식별 성능을 평가, 비교하였다. 또한 수작업으로 저자 식별 작업을 한 데이터셋을 기반으로 저자 당 논문 수와 토픽 수에 차이를 두고 연구를 진행하였다. 그 결과 저자명 식별에 있어 ACT 모델보다 DMR 토픽모델링의 성능이 더 우수한 것을 알 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.874-880
• /
• 2018

3D modeling is extensively used in the field of architecture, machinery and contents production such as movies. Modeling is a time-consuming task. In order to compensate for these drawbacks, attempts have recently been made to reduce the production period by applying 3D scanning technology. 3D scanning for small objects can be done directly with laser or optics, but large buildings and sculptures require expensive equipment, which makes it difficult to acquire data directly. In this study, 3D modeling data for a large object is acquired using photometry with using drones to acquire the image data. The maintenance method for uniform spacing between the sculpture and the drone, the measurement method for the flight line were presented. In addition, we presented a production environment that can utilize the obtained 3D point cloud data for animation and a rendered animation result to find ways to make it in various environments.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.113-114
• /
• 2011

납축전지는 충/방전을 반복함에 따라 전지 내의 화학적인 반응에 의해 그 용량을 잃어버린다. 그러한 과정에서 전지의 용량과 수명을 정확히 평가할 수 있도록 전지를 모델링하는 것이 이 논문의 목적이다. 정적 모델링을 통해 골프카트용 납축전지의 충/방전 특성의 연구 내용을 기술하였다. 정적 모델링 기법은 구성이 비교적 간단하고 결과를 빠르게 예측할 수 있는 장점이 있다. 이 모델링 기법을 통해 전지의 특성을 나타내는 변수들을 도출해내었다. 이러한 과정을 바탕으로 골프카트용 납축전지를 모델링한 후, 시뮬레이션 결과를 실험 데이터와 비교하여 모델링의 정확성을 판단하였다.