• Journal of Radiation Protection and Research
• /
• v.22 no.4
• /
• pp.309-317
• /
• 1997

The measured radioactivity of gamma-emitting radionuclides in each radioactive waste drum using the non-destructive waste assay method is underestimated than real radioactivity in radioactive waste drum because the gamma-rays are attenuated within the medium. Therefore, the measured radioactivity should be corrected for the attenuation of gamma-rays. For the correction of the attenuation of gamma-rays, the attenuation correction method should be applied differently by considering the distribution and density of medium in radioactive wastes drum generated from nuclear power plants. In this study, the model drums were fabricated for simulating five types of radioactive waste drums generated from nuclear power plant and the optimum methods of the attenuation correction were experimentally determined to analyze the activity of radionuclides in the waste drum accurately using the segmented gamma scanning system. With the determination of the attenuation correction methods from the experimental results the transmission method and the average density method for the miscellaneous waste drum, the transmission method and the differential peak absorption method for the shielded miscellaneous waste drum were used to measure the density of medium in waste drums. Also, the average density method and the differential peak absorption method for the spent resin drum, the paraffin solidified drum, and the spent filter drum were used.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.3
• /
• pp.275-284
• /
• 2006

In the measurement of gamma rays emitted from the nuclide in the radioactive waste drum, to analyze the nuclide concentration accurately, it is necessary to use the proper calibration standards and to correct for the attenuation of the gamma rays. Two drums having a different density were used to analyze the nuclide concentration inside the drum in this study. After carrying out the system calibration, we measured the gamma rays emitted from the standard source inside the model drum with changing the distance between the drum and the detector. The measured values were corrected with the three kinds of gamma attenuation correction methode, as a results, the error was less than 10 % in the low density drum and less than 25 % in the high density drum. The measured activity in the short distance was more accruable than in the long distance. The transmission correction for the mass attenuation showed good results(very Low error) compared to the mean density and the differential peak correction method.

• Journal of Energy Engineering
• /
• v.4 no.3
• /
• pp.364-371
• /
• 1995

100MW급 유류 연소 드럼형 열병합발전소의 주증기온도와 드럼수위 제어를 위한 비선형 PMBC를 개발하고 그 성능을 PID 알고리즘과 비교하였다. "first principle" approach를 사용하여 개발된 프로세스 모델은 정상상태를 과도상태에서 그 정확도를 현장의 데이터와 비교 검증한 것으로 제어기 성능 평가와 설계에 적합한 정교한 것이다. PMBC와 PID 제어의 성능을 부하증가와 연료의 열량변화 등의 외란에 비교한 결과, PMBC가 PID에 비하여 속응성, 절대오차 적분차, 제어노력 등에서 월등하게 우수한 것을 확인하였다. 것을 확인하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.135-138
• /
• 2002

본 논문에서는 비최소위상 시스템으로 표현되는 화력발전소 드럼의 수위제어를 위한 퍼지 제어기를 제안한다. 제안된 방법은 T. Takagi와 M. Sugeno의 퍼지모델을 기반으로 수행된다. 그리고 기존의 PID 및 LQ 제어기법을 적용한 방식과 비교하여 제안된 방법의 개선된 특성을 시뮬레이션 결과로부터 검증하였다.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.479-486
• /
• 2016

The efficient steam drum should be required to reduce carbon oxide emissions and heat recovery in oxygen converter hood system. However, steam generation is limited to the time of the oxygen blowing period, which is intermittent or cyclical in operation of steel-making process. Thus, steam drum should be optimized for an effective steam generation during the oxygen blowing portion of the converter cycle. In this study, a three-dimensional computational fluid dynamics (CFD) model has been developed to describe the impacts of changing various operating conditions and geometric shape on thermo-fluid characteristics and performance of the steam drum. This model encompasses not only fluid flow and heat transfer but also evaporation and condensation at the interfacial surface in the steam drum by using VOF (Volume of Fluid) method. To validate the prediction performance of this model, comparison of the steam flow rate between numerical and experimental result has been performed, resulting in the accuracy of the relative error by less than 3.2%.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.811-812
• /
• 2023

드럼 연습 및 연주를 쉽게 배우고 즐기기 위한 시각적 가이드를 제공한다. CNN과 OpenCV를 활용하여 악보의 음표 이미지를 처리하고, 데이터 수집, 전처리, 모델 학습, 서버와 안드로이드 애플리케이션 연동 등 다양한 과정으로 구현된다. '드럼라이트'는 드럼 연주의 접근성을 높이고, 다른 악기와 음악 학습 분야에도 확장 가능한 가능성을 제시한다.

• Korean Journal of Food Science and Technology
• /
• v.18 no.5
• /
• pp.351-356
• /
• 1986

The effects of drum spacing, steam pressure and drum speed on drying rate of minced fish flesh on both single and double drum dryers were studied. Starch additions in the form of tapioca flour up to 2.5% have been found satisfactory for aiding in sheet formation at the doctor blade. When the retention time was adjusted to maintain a constant product moisture, the highest production rate was obtained at the smallest drum spacing and the highest steam pressure within the limits of experimental conditions considered. The operating conditions suitable for producing the flakes with 5% moisture were: 100 kPa (steam pressure), 0.1 mm (drum spacing) and 3 rpm (drum speed). The production rate and overall heat transfer coefficient under these conditions were $12.1\;kg/m^2$hr and 950 $W\;/m^2K$ respectively. The drying data were fitted well to the conventional drying model, namely $MR\;=\;A\;\exp\;(-k{\theta})$, resulting in the various drying constants depending the operating conditions.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.218-223
• /
• 1999

현재의 발전소 보일러 제어방식은 프로세스 성격에 따라 제어루프의 상태변수들을 근간으로 세부적인 독립된 제어루프별로 제어를 시행하는 개별 루프를 채택하고 있다. 발전소에서 사용하는 PID제어 방식은 각 부시스템들의 상태변수, 출력변수가 다른 부시스템의 선행신호가 되거나 기준신호가 되어 피드백제오, 피드포워드 제어와 캐스케이드 제어 등의 신호로 작용한다. 선행신호와 상태 궤환 신호는 다른 부시스템의 상태변수를 측정함에 의하여 결정되며, 상호연결 함수는 경험에 의한 함수 설정에 의해 결정된다. 본 논문에서는 먼저 화력발전소 보일러 제어시스템을 플랜트 변수들 사이의 인과관계를 표현하는 신호흐름도의 보일러 모델과 실제 발전소에 적용되고 있는 드럼 수위 제어기에 대해 기술한다. 그리고 현장에서 취득한 운전데이터를 이용한 보일러 드럼수위 제어계통의 모델링에 관한 내용에 대해 기술하고, 마지막으로 컴퓨터 시뮬레이션에 의한 제어루프의 모의실험 결과를 통해 제어기의 설계와 제어루프의 효용성을 보이고자 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.219-228
• /
• 2010

A two-dimensional mathematical model was developed to predict the temperature and moisture-content profiles of a tumble dryer during infrared drying. The model is based on the movements of liquid water and moisture in the object and on the fluid and heat transfer in the drying air. The model was solved by the finite volume analysis for the fluid, temperature, and radiation intensity fields. After deriving the governing equations and developing the two-dimensional tumble dryer models, numerical investigations were carried out to examine the effects of various parameters such as the heater temperature and the heating patterns on the drying mechanism of the tumble dryer. All the results show that the drying time can be reduced by using the IR heater.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.84-86
• /
• 2001

본 연구에서는 플랜트의 계측신호로 부터 특징 패턴 파형들을 감지하고 패턴감지 정보로부터 플랜트의 운전상황 및 고장을 알아내도록 하는 새로운 기법을 제시하고, 이러한 기법의 실현에 필요한 신호처리 기초 연구를 수행하였다. 또한 보령화력 1.2호기 500MW급 드럼형 보일러및 제어 시스템을 대상으로 보일러 플랜트의 dynamics 모델링과 운전 시뮬레이션을 통하여 여러 운전 패턴및 고장 상황을 발생시켜 고장감지 앨고리즘들의 개발 및 시험과정에 적용하였다. 본 연구에서 수행한 보일러 및 보일러 제어계통에 대한 모델링 및 시뮬레이션은 실제 수행한 발전소 시험 데이터와 비교할 때 높은 일치도를 보이는 결과를 보였다.