• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.2 s.42
• /
• pp.37-46
• /
• 2005

To date, many viable smart base isolation systems have been proposed and investigated. In this study, a novel friction pendulum system (FPS) and an MR damper are employed as the isolator and supplemental damping device, respectively, of the smart base isolation system. A fuzzy logic controller (FLC) is used to modulate the MR damper because the FLC has an inherent robustness and ability to handle non linearities and uncertainties. A genetic algorithm (GA) is used for optimization of the FLC. The main purpose of employing a GA is to determine appropriate fuzzy control rules as well to adjust parameters of the membership functions. To this end, a GA with a local improvement mechanism is applied. This method is efficient in improving local portions of chromosomes. Neuro fuzzy models are used to represent dynamic behavior of the MR damper and FPS. Effectiveness of the proposed method for optimal design of the FLC is judged based on computed responses to several historical earthquakes. It has been shown that the proposed method can find optimal fuzzy rules and the GA optimized FLC outperforms not only a passive control strategy but also a human designed FLC and a conventional semi active control algorithm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.54-63
• /
• 2006

This work proposes a 14b 100MS/s 0.18um CMOS ADC with optimized resolution, conversion speed, die area, and power dissipation to obtain the performance required in the fourth-generation mobile communication systems. The 3-stage pipeline ADC, whose optimized architecture is analyzed and verified with behavioral model simulations, employs a wide-band low-noise SHA to achieve a 14b level ENOB at the Nyquist input frequency, 3-D fully symmetric layout techniques to minimize capacitor mismatch in two MDACs, and a back-end 6b flash ADC based on open-loop offset sampling and interpolation to obtain 6b accuracy and small chip area at 100MS/s. The prototype ADC implemented in a 0.18um CMOS process shows the measured DNL and INL of maximum 1.03LSB and 5.47LSB, respectively. The ADC demonstrates a maximum SNDR and SFDR of 59dB and 72dB, respectively, and a power consumption of 145mW at 100MS/s and 1.8V. The occupied active die area is $3.4mm^2$.

• Journal of the Korean Geographical Society
• /
• v.46 no.6
• /
• pp.707-723
• /
• 2011

The purpose of this study was to quantitatively evaluate the effectiveness of learning management systems (LMS) in the physical geography class. The study adopted the experimental design and three classes participated in this study. The first class was controlled using only classroom lectures, the second class used PPT slides along with the classroom lectures, and the third class used online video clips along with the lectures. The experiments were conducted from the Spring Semester 2007 to the Spring Semester 2008 for the introductory physical geography course. The study results showed that online learning tools help students improve academic performance and their attitudes towards the class and the instructor. Compared to simple PowerPoint slides, voice recording attached to the visual lecture slide materials enhanced students' motivation. Class lectures with lecture slides did not improve students' scores. However, when the visual materials were combined with voice recording, the number of internet access to online class materials increased, and class attendance and students' final grades were improved. Based on the results, the instructional design model that combines classroom and online learning was suggested.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.165-179
• /
• 2004

With the spread of wireless internet, the interest in mobile applications and services is increasing. Korea Wireless Internet Standardization Forum has been establishing the standards for mobile platform and map service in the wireless internet environment. This study aims to present a paragon of mapping middleware that plays the role of broker for wireless internet map service: in particular, it focuses on the interoperability with generic map servers. In this study, we developed a method for applying current map servers to the wireless internet map service, and analyzed the request/response structure of the map servers which have different operation characteristics in order to allow our middleware to fully utilize the functionalities of the map servers. The middleware we developed is composed of .NET-based XML Web Services: it has a lightweight module for image map and a map representation module for choropleth map, symbol map, chart map, etc. This mapping middleware is a broker between mobile client and generic map server, and supports .NET clients and Java clients as well. Its component-based interoperability grants the extensibility for the wireless internet dedicated map servers of the future in addition to the current generic map servers.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.70-74
• /
• 1999

발전소 시뮬레이션 시스템 기술은 종합적인 지식을 바탕으로 자료수집 및 분석, 소프트웨어 개발 환경, 수학적 모델, 전산기 구성, 각종 계기류 설계 및 구매 장착 등의 노하우를 알아야만 제작할 수 있는 종합적인 기술이다. 또 지시기반의 기술이며 부가가치가 높은 기술이기 때문에 선진 각국에서는 계측제어 시스템의 기술개발 및 시장 확대를 위하여 힘을 쓰는 동시에 타국으로의 기술정보 유출을 경계하는데 신경을 곤두세우고 있다. 현재 복잡화되어 가고 있는 산업 사회의 전력 수요에 대한 대폭적인 증가 추세에 따라 발전소에서는 보다 효율적이며 합리적이고 경제적인 전력 공급을 위해서 전력 생산에 대한 신뢰성 향상 및 안정성 확보는 물론, 효율성 높은 운전이 절실히 요구되고 있다. 한편, 국내의 시뮬레이션 시스템 분야 기술은 아직도 완벽한 수준에는 미치지 못하며, 이 분야의 기술력 확보 및 신기술 개발은 향후 미래의 모든 시스템산업의 성쇄를 판가름하는 아주 중요한 척도가 될 것이다. 이 중에서 접지 분야는 고전압 혼촉에 의한 저압측 선로의 전압상승 방지, 모선(Bus)이나 전력 기기의 절연보호 및 회로전압의 안정등으로 시스템 성능을 한층 증가 시켜줄 뿐아니라 기기의 오동작이나 낙뇌등으로 인명피해 발생을 없애주는 아주 중요한 분야임에도 불구하고 이 분야의 국내 관련법규등이 미비한 사항이다. 그래서 발전소 분산제어 시스템분야의 장기간 신뢰성 및 안정성을 가지고 있고, 국내에서 많이 사용하는 미국 Bailey의 infi-90 및 독일 ABB의 Procontrol-P를 비교 분석하여 발전소 시뮬레이션 시스템의 접지에 응용 하고져 한다.상호 발생기를 이용한 다양한 시스템 검증 및 분석에 이용할 수 있을 것이다. 본 논문은 가상호 발생기의 구조와 최대 용량 시험 방법을 소개하고, 더 나아가 호 Traffic에 대한 최대 용량 시험뿐 아니라 QoS를 향상시키기 위한 교환 시스템의 제반 성능 시험 및 분석에 이를 이용하기 위해 개선이 필요함을 서술하고자 한다.textrm{m}$~3.4$\mu\textrm{m}$ 범위에서의 투과 및 흡수 스펙트럼을 측정하였다. 결정 성장 결과 B3+, Er3+, Cr3+ 이온은 Ti4+ 이온과 이온의 크기 차이가 심하여 결정의 정상적인 성장을 방해하는 물성을 나타냈고, V5+, Cr3+ 이온은 흑색의 결정, Fe3+ 이온은 적갈색의 결정으로 성장되었다. Al3+, Zr4+, Al3+의 순서로 투과도가 높아지는 것이 관찰되었다. 불순이온의 농도에 따른 영향으로서 Al3+ 이온의 경우 주입농도가 높아질수록 low angle boundary와 oxygen deficiency가 감소하였고, 투과율은 조금 감소하거나 큰 차이가 없는 것으로 나타났다. 반면에 Cr3+ 이온을 주입한 경우 0.003 atomic%에서 최적의 물성을 보였으며, 주입농도가 높아질수록 결정성장이 어려워지고 광의 투과도가 급격히 저하되었다.은 1.3을 나타내었다.로 보인다.하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인

• Journal of KIISE:Software and Applications
• /
• v.29 no.9
• /
• pp.676-683
• /
• 2002

The success of XML(eXtensible Markup Language) is primarily based on its flexibility : everybody can define the structure of XML documents that represent information in the form he or she desires. XML is so flexible that XML documents cannot be automatically provided with an underlying semantics. Different tag sets, different names for elements or attributes, or different document structures in general mislead the task of classifying and clustering XML documents precisely. In this paper, we design and implement a system that allows checking the semantic-based similarity between XML tags. First, this system extracts the underlying semantics of tags and then expands the synonym set of tags using an WordNet thesaurus and user-defined word library which supports the abbreviation forms and compound words for XML tags. Seconds, considering the relative importance of XML tags in the XML documents, we extend a conventional vector space model which is the most generally used for document model in Information Retrieval field. Using this method, we have been able to check the similarity between XML tags which are represented different tags.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.211-216
• /
• 2016

Worldwide casualties caused by earthquakes, floods, fire or other disaster has been increasing. So many researchers are being actively done technical studies to ensure golden-time. In this paper if a disaster occurs, use the IoT technologies in order to secure golden-time and transmits the message after to find the user of the accident area first. When the previous job is finished, gradually finds a user of the surrounding area and transmits the message. For national emergency information, OPEN API of Korea Meteorological Administration was used. To collect detailed information on a relevant area in real time, this study established the system that connects and integrates Crowd Sensing technology with BLE (Bluetooth Low Energy) Beacon technology. Up to now, the CBS based on base station has been applied. However, this study designed and mapped DB in the integration of Beacon based user positioning and national administrative address system in order to estimate local users. In this experiment, the accuracy and speed of information dif6fusion algorithm were measured with a rise in the number of users. The experiments were conducted in a manner that increases the number of users by one thousand and was measured the accuracy and speed of the message spread transfer algorithm. Finally, became operational in less than one second in 20,000 users, it was confirmed that the notification message is sent.

• Review of Culture and Economy
• /
• v.20 no.2
• /
• pp.19-45
• /
• 2017

This paper aims to apply our research and theorization on arts entrepreneurship to entrepreneurs active in the arts and cultural sector. Our goal is to develop proposals for practical actions that can support both arts entrepreneurs and supportive arts advocates. Using Action Research methodology, we hosted and facilitated two workshops with selected groups of arts entrepreneurs. Prior to the workshops we designed a questionnaire, based on the competency theory, to assess the qualities and characteristics of the participants. During the workshops we conducted surveys, interviews, and made observations in order to further understand the knowledge, experiences, motivations, capabilities, and attitudes necessary to successful arts entrepreneurship. We also conducted in-depth follow-up interviews with participants as a cross-check. We found that most of the participating arts entrepreneurs had a low understanding of the technology required for effective arts entrepreneurship, which has resulted in insufficient managerial support for artistic innovation. In addition, we found that participants lacked the skills and clear vision to construct a viable economic engine for their organization. Nevertheless, in light of the considerable strengths and high levels of enthusiasm and commitment participants evinced, we believe that their deficits can be corrected with education and training. Thus, we conclude by discussing the path forward and outlining a proposal to develop an innovative educational program on the daily operations of arts management that emphasizes applied technology and creating financial sustainability.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.75-83
• /
• 2015

As the importance of realistic game character in order to cause the interest of player is increased, it is necessary to develop the character that acts like a man by applying the human characteristics in the step of game character design. Formerly, there is a limit to create the human-like character because there is no set the character's personality in the game developing level. In this paper, therefore, we propose the correlation between Five Factor Model and Ego-state for game character. Five Factor Model and Ego-state are theories about person's characteristic. Five Factor Model is personality description method. Ego-state has an emphasis on internal mental processes directly from observable behaviors. In this regard, these theories could be used to the character defined its personality and designed to act by personality. To do this, it needs to determine the relations between Five Factor Model and Ego-state. Therefore we seek for the relations between two theories using Adjective Check List(ACL) and analysis their results with surveys. In the future, it is expected to construct a personality model using these analysis results, and develop the character based on realistic behavior.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.3-14
• /
• 2021

In the Chinese construction industry, the utilization of Building Information Modeling (BIM) aims to increase the total output of the construction industry by solving the problem of inefficient interoperability in the construction industry. In 2011, the Chinese Ministry of Housing and Urban-Rural Development despite the technical advantages of BIM and the government policy, the BIM adoption rate in China is lower than 45%. Meanwhile, as the South Korean construction industry is a step ahead of its Chinese counterpart in introducing and utilizing BIM, it is expected that BIM is more actively utilized and accepted in South Korea than in China. According to a comparative study based on the hype-cycle theory, South Korea is at a more advanced stage of introducing BIM, than in China. This study aimed to suggest how to increase BIM utilization rates in China. To this end, this study comparatively analyzed factors affecting BIM acceptance between China and South Korea. For the comparative analysis of the BIM acceptance factors between China and South Korea, literature reviews on the technology acceptance model (TAM) and BIM acceptance model were carried out, and based on that, the BIM acceptance factors were classified. Other BIM acceptance factors were also added and considered, as they reflected Chinese national characteristics and construction industry. As for the derived BIM acceptance factors, construction project participants, especially actual BIM users in China and South Korea, were targeted for the survey. A t-test using SPSS 22.00 was carried out to identify significant differences in data. Finally, based on the t-test results, this study suggested ways of improving the BIM utilization rate in China. Based on the findings, this study is expected to contribute to activating BIM adoption in the Chinese construction industry and also to set a theoretical foundation for future studies on BIM utilization in the industry.