• Spatial Information Research
• /
• v.16 no.2
• /
• pp.263-278
• /
• 2008

Nowaday, local governments have planned to manage intelligent underground facilities through the u-City project. But, the intelligent underground facilities are in need of the progressive approach because of the required huge financial resources. Therefore, the objectives of this research are (1) to prioritize the monitoring items of sensing technology developments, (2) to study technological feasibilities, and (3) to discover the killer application which expands ripple effects on economy. To achieve these objectives, final monitoring items were derived from the business analysis of the water supply, the local government survey, the hearing expert opinions and so on. The priority order of final monitoring items were technology developments of (1) the flowmeter flux, (2) the water leakage/crack, (3) the pressure of water supply pipes, and (4) the flux of filtration plants. The research significance is obtained from the derivation and the evaluation of the priority order and the actual demand for the water supply facility management. And, the research results will contribute to the strategic planning for the underground facility intelligence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.440-446
• /
• 2019

Pine wilt disease occurred for the first time in Busan in 1988 and the damage has since been increasing. In 2005, a special law was enacted for pine wilt disease by Korea Forest Service. Incidences relating to the forest pest had been frequent and chemical control as well as physical control techniques had been applied to control it. Therefore, there is a need to reduce the damage caused by the pine wilt disease through intensive management such as continuous monitoring, control, and monitoring based on active control as well as management measures. In this study, the UAV-based monitoring method was proposed as an economical way of monitoring the forest pest. The efficiency of the existing method and UAV method had been analyzed, and as a result the study suggested that UAV can be used for forest pest monitoring and indeed improve efficiency. The UAV-based forest pest monitoring method has a cost reduction of about 50% compared with the conventional method and will also help to reduce the area where the survey was omitted.

• Land and Housing Review
• /
• v.6 no.3
• /
• pp.107-115
• /
• 2015

Recently one of interest concern in domestic housing market is to reduce the difference of supply and demand. Exact demand estimation by accurate demand region is a essential cue to reduce the gap. This empirical study compared the data of housing subscriber's real address with estimated demand area on household movement, which are applied by advanced studies. This empirical case data is related to 3 housing development districts in metropolitan area. As a result, This study found that the real demand area has a more widened coverage compared with those of household movement one. For to establish exact demand area, we found, more complementary considerations should be taken. Especially some factors such as distance between a project site and downtown of Seoul Metropolitan City, locational competitiveness on main demand and behind demand, and development scale are more considerable variables. In additionally, we found the demand areas are influenced by housing rental types, sizes and the real estate business trends. And also, this study found those factors should be considered with housing price and locational competitiveness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.469-478
• /
• 2022

This paper contains the results of developing smart devices and applications to monitor the load power of the industrial manufacturing machine and evaluate its performance. The smart devices in this paper are divided into two functionalities, which are collecting load power along with operating environment data of industrial manufacturing machines and transmitting the data to servers. Load power data collected from the smart devices are uploaded to MariaDB inside the Amazon Web Service (AWS) server. Using the RESTFul API, the uploaded power data can be retrieved and shown on the web and mobile application in the form of a graph to provide monitoring capability. To evaluate the performance of the developed system, the response time from MariaDB to web and mobile applications was measured. The results is ranging from 0.0256 to 0.0545 seconds in a 4G (LTE) network environment and from 0.6126 to 1.2978 seconds in a 3G network environment, which is considered a satisfactory result.

• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.311-317
• /
• 2017

In this study, the water quality index was calculated using the water quality monitoring data in the Nakdong River water system and the water quality status was compared with the living standard. The water quality index was selected by the RWQI method CCME-WQI currently used by the Ministry of Environment. The water quality items were selected as 7 items for pH, DO, EC, water temperature, TOC, T-N and T-P. The evaluation period was selected from the last three years (2013~2015) and water quality monitoring data measured within the period were used. As a result of the evaluation, the results of the previous evaluation showed similar tendency to the index of living environment, but the monthly evaluation showed different BOD and T-P results. Therefore, it is concluded that it is more reliable that more complex evaluation than single water quality evaluation is needed for efficient river management.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.57-65
• /
• 2006

This paper presents hybrid structural damage monitoring system which performs both global damage assessment of structure and damage detection of local structural joints. Hybrid damage monitoring system is composed of vibration-based technique and electro/mechanic impedance technique. Vibration-based technique detects global characteristic change ot structure using modal characteristic change of structure, and electro/mechanical impedance technique detects damage existence of local structural joints using impedance change of PZT sensor. For the verification of the proposed hybrid monitoring system, a series of damage scenarios are designed to loosened bolts situations of the structural joints, and acceleration response and impedance response signatures are measured. The proposed hybrid monitoring system is implemented to monitor global damage-state and local damages in structural joints.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.615-632
• /
• 2008

The bridge health monitoring has become an important research topic in conjunction with damage assessment and safety evaluation of structures owing to the improvement of structural modeling techniques incorporating response measurements and the advancements in signal analysis and information processing capabilities. The bridge monitoring systems are generally composed of hardwares such as sensors, data acquisition equipment, data transmission systems, etc, and softwares such as signal processing, damage assessment, display and management, etc. In this paper, the research and development(R&D) activities on the information processing for structural health monitoring of bridges are reviewed. After a brief introduction to the process of bridge health monitoring, various information processing techniques including various signal processing and damage detection algorithms are introduced in detail. Several challenges addressing critical issues in the current bridge health monitoring system and future R&D activities are discussed.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.203-213
• /
• 2011

Time-lapse seismic surveys make repeated seismic surveys at different stages of oil production of a hydrocarbon reservoir to monitor changes in reservoir like fluid saturation. Since the repeatable surface seismic measurements can identify fluid types and map fluid saturations, oil and gas companies can make much more informed decision during not only production but also drilling and development. If time-lapse seismic surveys compare 3D seismic surveys, the time-lapse surveys are widely called as 4D seismic. A meaningful time-lapse interpretation is based on the repeatability of seismic surveys, which mainly depends on improved positioning and reduced noise (if surveys were designed properly through a feasibility study). The time-lapse interpretation can help oil and gas companies to maximize oil and gas recovery. This paper discusses about time-lapse seismic surveys mainly focused on feasibility, repeatability, data processing and interpretation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.503-504
• /
• 2017

Recently, economic growth in the world has increased interest in healthy life, and the smart health care industry is growing. In the field of smart healthcare, wearable-type biometric information measurement technology has been highlighted due to the importance of IoT technology. The purpose of this study is to develop a wearable heart - rate monitoring system that can be applied to wearable health care and glove - type monitoring that enables convenient monitoring of heart rate during activity. For this purpose, a glove - type wearable health care system was developed and its performance was evaluated. Experimental results showed that the heartbeat monitoring was possible even in the presence of actual daily activities.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.470-470
• /
• 2023

하천 및 저수지의 수량자료 수집을 위해 부자식 또는 레이더식 수위계 등의 계측기를 이용하여 수위의 변화를 측정한다. 그러나, 수량 모니터링을 위해 설치되는 계측기와 유지관리를 위한 인력소모 비용의 이유로 일부 지역에서만 제한적으로 수행되고 있어 정확한 수문 해석에 한계가 있다. 이에 본 연구에서는 저가의 센싱장비와 라즈베리파이를 활용한 ICT 기술을 수량 모니터링분야에 적용하여 수위 모니터링 기술을 개발하고자 한다. 라즈베리파이(Raspberry Pi 3 B Model)는 오픈소스 기반의 초소형 컴퓨터로 여러 센서를 연결하여 다양한 수문 인자(토양수분, 온도, 수위 등)들을 측정할 수 있으며, 통신 모듈이 기본 내장되어 있어 통신망 구축을 통해 측정데이터를 데이터베이스에 저장할 수 있다. 수위센서(eTape)와 초음파센서를 연결하여 실제 하천 유량 모니터링에 활용되고 있는 부자식 수위계 장비와 비교 분석을 통해 활용 가능성을 검증하고자 하였다. 검증방법은 인공강우실험을 위해 설치된 플륨관에 수위센서(eTape)와 초음파센서를 부착하여 기존 운영중인 부자식 수위계와 비교하였다. 부자식 수위계의 측정결과와 두 센서의 상관관계를 분석한 결과 결정계수(R²)가 0.94 이상으로 나타났다. 분석결과와 같이 기존 고가의 수위 관측장비들을 대체하여 저가의 센서 기반 모니터링 장비들의 실용화가 가능할 것이라 판단된다. 향후 연구에서는 다양한 센서(수위, 초음파, 카메라 등)를 이용하여 농업용수 물수지 분석에 활용할 계획이다. 농업용수는 수자원 총량 중 차지하는 비율이 높음에도 불구하고 정량적 데이터가 부족한 실정이며, 지역별 공급 특성이 다양하여 이를 계량화하기 위해서는 다수의 계측기가 필요하다. 따라서, 본 연구에서 개발중인 센서를 활용하여 물순환 과정의 정량적인 계측을 통해 농업용수의 효율적인 관리 및 농업용수의 하천기여도 평가 자료로 활용될 수 있을 것으로 판단된다.