• Conservation Science in Museum
• /
• v.10
• /
• pp.21-27
• /
• 2009

This bamboo brush stand was made by attaching two bamboo tubes together, each 80mm in diameter. On the bottom is a "∞-shaped"wood board made of Ailanthus altissima. The surfaces are decorated with exquisite and dynamic designs of a dragon and clouds, and a deer and pine trees. Part of this bamboo brush stand was damaged, lost, or worn down, prior to conservation treatment. After conservation and recovery treatment, its original form was restored. Earth powder, chalk, and gluten mixture were used as materials to fill in the missing parts. After the original form was restored, thin silk fabric was attached to the inner surface of the glued part to prevent cracking. Traditional materials and repair techniques were used to allow for reversal of treatment, if necessary, as seen in the surface of the restored part being made antiquated with lacquer varnish.

• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.65-70
• /
• 2005

The elevator system which is operated nowadays at skyscrapers, apartments and enterprises does not offer standby passengers any information of which floor the elevator is going to stop or skip. This study will introduce the system that shows the Passengers a running schedule of the elevator. If this system is utilized for current systems, it will bring so much benefit such as shortening waiting time or choosing alternatives for the passengers. Furthermore, this system will be set up not stopping the floor for the passengers who choose alternatives like using stairs or escalators with using toggle switches. This will be efficient to save the electric power.

• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.633-644
• /
• 2004

In this paper, we notice that the original NTSS algorithm can be proposed as the NTSS-3 Level algorithm by the multi-resolution technique. The fast block matching algorithm affects the speed by the patten combination and this paper proposes the block matching algorithm in different levels by multi-resolution technique, quite different from the original NTSS Patten. The block matching algorithm requires the multi-candidate to reduce the occurrence of low-image quality by the local minima problem. The simulation result compared to FS shows search speed 16 times quicker, and the PSNR 0.11-0.12［dB］ gets improved Image quality compared to the original fast block matching algorithm NTSS, and the speed is improved up to 0.1 times for improved image by the search point portion.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.69-71
• /
• 2007

최근 들어 전력 계통은 점차 복잡해지고 계통의 규모 역시 빠른 속도로 성장하고 있다. 한국전력거래소는 전력계통의 안정적, 경제적 운영을 담당하고 있는 기관으로 '01년 현재의 에너지관리시스템(EMS)를 도입하여 실시간 전력계통에 대한 정확한 판단을 기반으로 전력계통의 안정성과 경제성 확보에 주력하고 있다. EMS의 대표적인 기능은 계통데이터의 수집(SCADA), 자동발전제어(AGC), 계통해석(NA) 등으로 대별되며, 이중 계통해석 기능은 프로그램 규모면에서 가장 큰 부분을 차지하고 있다. 계통해석 기능은 또다시 상태추정(SE), 상정사고분석(CA), 안전도해석(SENH), 고장해석(SCT) 등의 프로그램으로 구성되어 다양한 실시간 계통해석을 수행하게 된다. 전력계통 해석은 먼저 대상계통을 수학적 모델로 정식화하기 전에 계통망의 기하학적 구조를 기술하는 단계가 필요한데 이를 토폴로지 처리라고 하며, 보통 그래프이론인 노트(Node)와 마디(Branch)를 사용하여 전력계통망을 구성하는 요소들의 연결관계를 정의하게 된다. 본고는 이론적 수준을 넘어 EMS의 계통해석 기능에서 실계통을 해석하기 위해 쓰이고 있는 토폴로지 처리의 기본 알고리즘을 분석하여 국내 전력산업 기술 선진화에 기여하고자 한다.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.3019-3028
• /
• 2000

One of the most frequently used spline scheme in CAD and graphics package is Bezier curve. Although simple and easy to implement, it supports diverse kinds of curves and surfaces. In view of the design convenience, the main advantage of the Bezier curves is that they observe user-specified slope conditions at both endpoints while maintaining smoothness. This paper expands the advantage by deriving equations for generalized Bezier curves, and applying the equation to observe additional slope condition at midpoint. This is possible by decomposing and analyzing the user-specified midpoint slope, and reflecting the result back into the Bezier basis matrix in parametric form. Consequently, users can control the curve shapes not only by the endpoint slope handles but also at the midpoint slope handle, which helps them to be able to apply more accurate control over the conventional Bezier curve shapes.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2969-2979
• /
• 2000

A mobile host has failure causes such as failure of the mobile host, disconnection of the mobile host, and wireless link failure that have not been seen in traditional computing environments. So far there have been few studies on fault tolerance of a mobile host in mobile computing environments. The Lazy scheme, a failure recovery technique of the mobile host, is a cost-effective one. However, this scheme has a defect that the mobile host cannot be recovered from failure of the base station with acheckpoint of the mobile host. In this paper, we propose and evaluate the Redundant Lazy scheme for performance improvement of the Lazy scheme.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06d
• /
• pp.560-565
• /
• 2007

본 논문에서는 H.264 동영상 표준의 가변 움직임 블록을 위한 고속 움직임 예측 기법을 제안한다. 움직임 예측은 H.264의 비디오 코딩 과정에서 가장 많은 연산량을 차지하는 중요한 처리과정이다. 움직임 예측과정에서 정수배 화소 단위에서의 탐색에 비하여, 부화소 단위까지의 움직임 추정은 실제 움직임 벡터를 찾아낼 수 있지만, 이를 구하기 위한 계산량이 늘어나는 문제가 있다. 본 논문에서는 기준점을 기준으로 기준점으로부터 $\pm1$ 화소 내에서 두 번째로 작은 오차 값이 있는 특성 및 부화소 단위의 화소 보간 특성을 이용하여 움직임 추정 과정에서 탐색점을 줄임으로써 연산 처리 속도를 증가시키고, 계산의 복잡도를 줄이는 알고리즘을 제안하였다. 제안한 방법에서는 정수 화소 단위에서의 가장 작은 SATD를 갖는 점과 참조 영상으로부터 추출한 PMV를 비교하여 기준점을 정한 후, 기준점 주위의 8개의 화소 위치 가운데 두 번째로 SATD값이 작은 점을 찾아 해당 방향으로 1/2 화소 단위의 움직임 추정을 수행하였고, 1/4 화소 단위에서도 1/2 화소단위에서 두 번째로 SATD가 작은 점 방향으로 움직임 추정을 실행하였다. 그 결과 기존의 JM에서 사용한 고속 움직임 예측 알고리즘에 비해 PSNR값에 큰 변화가 없고, 움직임 벡터 예측 시간 면에서 약 18%의 시간을 줄이는 결과를 보였다.

• The KIPS Transactions:PartB
• /
• v.11B no.7 s.96
• /
• pp.821-830
• /
• 2004

In this paper, we model the downward collision of a falling object to the base. We aim to provide maximum diversity of response to physical. collision. To this end, the primary design concern of the model is to unfold the collision phenomenon in a logical and natural manner, detailed enough to construct an immersive virtual environment. To achieve these requirements, first we determine domains for the characteristic of the material of the falling objects, and select the dominant force of the collision. We formulate the collision phenomena with combination of primitive attributes and their relationships. The formulated function evaluates the results of the collision in qualitative aspects as well as in quantitative aspects. Between the collision issues, 'Collision Detection' and 'Collision Response', this paper focuses on Collision Response issue.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.10
• /
• pp.2713-2724
• /
• 1998

This paper proposes a new method for the parameter estimation in Markov Random Field(MRF) model of textured color images. The MRF models allow an image region to bel described using a finite number of parameters that characterize spatial interactionsl within and between bands of al color image. An important problem is estimation of the parameters since the randorn field model-based textured color image is the mostly parametric images of natural scenes to verify the validit of the proposed method proves that the method is not affected by the size of the image and shows well-segmented images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.710-716
• /
• 2003

OFDM is a very attractive technique for achieving high-bit-rate data transmission and high spectrum efficiency. However one of disadvantages of OFDM signal is the high PAPR characteristic when multicarriers are added up coherently. In this paper, we propose an adaptive PTS scheme using two threshold levels for PAPR reduction and reducing the amount of PAPR calculations with clipping scheme. Simulation results show that it is almost same between average bit error rate performance of the proposed scheme and that of a conventional scheme. Also, we obtain a great performance gain in the amount of calculations compared to the conventional scheme. Therefore, proposed system has a good performance in data processing time in OFDM wireless communication systems.