• Proceedings of the Speleological Society Conference
• /
• 2004.06a
• /
• pp.5-18
• /
• 2004

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.44-48
• /
• 2004

A silent type ozone generator using water surface electrode was proposed. And it was investigated experimentally that a variation of water conductivity affected to water surface discharge. Important factors affecting to water surface discharge are ions in discharge space and ions and polarized molecules in water and so on. In this study, It was intended to change the characteristics of discharge by controlling the number of ions in water. The number of ions in water could be controlled by changing the water conductivity. Water conductivity was controlled by quantity of inserted NaCl to distilled water. At this time, current-voltage characteristics and characteristics of ozone generation quantity were investigated in each case. As a result, when NaCl was inserted in distilled water, more stable discharge was generated. As the quantity of NaCl was increased, discharge starting voltage could be lowered.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.16-26
• /
• 2004

As the importance of outdoor lighting become more widely recognized, outdoor lighting has been installed in many buildings, plazas, landscape, and historical monuments in Korea, Outdoor lighting on showing complex, in particular, express its values as local landmarks. However, the excessive outdoor lighting in the large-scale shopping complex tends to cause light pollution. Many advanced countries are trying to create a comfortable lighting environment by the guidlines and regulations on outdoor lighting to prevent light pollution. For this research backgrounds, the light pollution of three showing complexes in Seoul have been investigated. For the purpose, luminance of building facade, horizontal illuminance, and vertical illuminance were measured with proper measurement instruments and compared the results with the CIE recommendations. The results of the study are as follows. As no cut-off luminaries are currently installed on pedestrian walks, some glare were occured partially. It also shows that the luminance of building facades are high to improve the degree of public awareness of buildings and advertisements. In other words, the luminance of the building facade, when compared with that of the CIE recommendations, is twice as high and the vatical illuminance of pedestrian walks is far higher than that of the CIE recommendations, which proves the existence of light pollution. As Korea has not yet provided proper regulations or guidelines for the control of light pollution, it is necessary to make appropriate codes for it.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.2
• /
• pp.31-38
• /
• 2001

LCD는 비발광형 소자이므로 배면광이 필요하다. 현재의 LCD 배면광용 냉음극 형광램프는 전기-광학적 특성을 좋게 하기 위하여 수은방전을 사용한다. 그러나 수은의 이용은 외부 온도에 따라 특성이 변하는 결점과 환경 문제가 있다. 이 결점을 보완하기 위하여 원통방전형, 미세방전형 그리고 평면방전형 등 세가지 방식의 무수은 램프가 개발되어 왔다. 원통 방전형 무수은 램프는 수은 대신 Xe을 사용한다. Xe 방전이 수축되는 것을 막기 위하여 한쪽 전극은 외벽에 코일형태로 감아서 사용한다. 그리고 코일형태의 전극의 권선 간격을 조절하여 균일한 방전을 얻는다. 이 형태는 무수은 냉음극 형광램프의 두배의 광속을 얻을 수가 있다. 미세방전형 무수은 램프는 두 개의 절연체로 절연되 금속 전극사이의 방전공간에 수많은 미세방전을 일으켜 발광시킨다. 이 방식은 대향 방전구조와 면 방전구조의 두가지가 있다. 이 방식은 전극이 유전체로 둘러쌓여 있으므로 수명이 높다. 새로운 평면방전형 무수은 램프를 개발하였다. 이 램프는 두 개의 유리평판 사이에 방전공간을 만들고 한쪽 유리면의 양쪽 가장자리에 두 개의 전극을 설치하여 면방전을 유도한다. 양쪽 유리면에는 삼원색 형광체를 도포하고 Xe을 봉입하여 Xe의 진공자외선으로 형광체를 발광시킨다. 이 램프는 전극이 유전체로 덮혀있어 수명이 길다. 실험결과 기체압력 6.7[kPa], 구동전압 1,130[V]에서 최대휘도 9,200[$cd/m^2$], 광효율 20.4[lm/W]을 었었고, 기체 압력 2.7[kPa] 구동전압 1,120[V]에서 최대효율 34.1[lm/W], 휘도 1,080[$cd/m^2$]을 얻었다. 현재 무수은 램프는 수은 램프에 비해서 광학적 특성이 좋지 못하다. 무수은 램프에서 좋은 광학적 특성을 얻기 위해 가장 중요한 것은 수축이 없이 방전을 확산시키는 것이다. 이를 위해서 램프구조와 구동법을 최적화하는 것이 필요하다. 또한 기체압력을 높임으로서 Xe의 여기복사를 얻을 수 있었다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.6
• /
• pp.27-33
• /
• 1993

In order to improve complicated construction and complex control which are didvantage of optimal PWM technique aimed at harmonic elimination method, this paper presented MRA(Mode1 Reference Adaptive) PWM technique that gating signal of inverter is generated by comparing the reference signal with the induced feedback signal at the reference model of load. Design of controller is composed of microprocessor and analog circuit. MRA PWM technique used in the paper is able to compensate the degradation of voltage efficiency to be generated by the ratio of the output voltage to the DC supply voltage being low for using conventional sinusoidal PWM technique. When the trapezoidal signal is employed as the reference signal. the low order harmonics of line current can be reduced and the switching pattern is made by on-line computation using comparatively simple numerical analysis.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1993.10a
• /
• pp.17-21
• /
• 1993

본 램프는 자체설계제작 기술에 의해 개발된 것으로서 국내 여건에 맞게 시동전압, 광속, 연색지수등에 중점을 두고 개발하였다. 시동특성, 밝기 연색지수 등 거의 모든 면에 있어서 선진제품과 동등수준, 그이상이다. 아직까지 수명시험이 완료되지않아 정확한 평가를 내릴수는 없으나 초기특성에 있어서는 선진제품보다 우수하다. 이번에 개발완료한 옥내용 메탈할라이드 램프는 점포조명, 전시장조명용으로 각광을 받고있으며 현재 전량 수입에 의존하고있다. 국내여건에 맞게 설계제작된 본 램프가 본격생산되는 94년 초가 되며는 수입을 억제 국내조명산업을 보호할수 있으리라 생각된다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.56-56
• /
• 2001

임의의 물체색은 장면(scene)에 존재하는 조명과 물체 표면의 특성에 의해 결정되므로, 정확한 물체색을 표현하기 위해서는 조명색의 추정이 중요하다. 본 논문은 인지광원(perceived illumination) 현상을 확장한 방법과, 광휘점(highlight) 방법을 각각 제안하고, 두가지 방법을 결합하는 결합적 조명색 추정방법을 제안한다. 인지광원 방법은 개략적인 해의 범위를 결정하는 면에서는 안정성이 보장되나, 정확성의 측면에서는 입력영상의 내용에 의존적인 경향이 있는 단점이 있다. 광휘점 방법은 입력영상의 내용에 의존적이지 않으며, 정확한 해를 제시하는 장점이 있으나, 최종적인 해를 결정하기 위해 폭넓은 범위를 가지는 교차점인 다수의 후보들을 고려해야 하는 단점이 있다. 그러므로 본 논문에서는 두 가지 방법의 상호보완적인 특성을 이용하여, 인지광원 방법의 추정결과를 가능한 해의 개략적인 범위로 설정하고, 광휘점 방법으로부터 추출된 후보점 및 분포 클러스터(cluster)들의 특성을 고려하여 최종적인 해를 결정하는 알고리즘을 제안한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.21-26
• /
• 1999

Using daylight in underground spoce may significantly reduce electric lighting load and give a visually comfortable environment. This reper describes a fundaIrentaI study on light duct system to predict inter illuminance ratio on underground periIreter occupied zone level. As a result, integral equation for inter-reflection program are developed and by using optimize light duct system can gives daylight on deep underground space. space.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.9-14
• /
• 2005

In this study, we investigated the actual conditions of illumination environment of study rooms in detached houses. From the results, fluorescent lamp as a lighting source and direct lighting method were mainly used. The additional use of local lighting was 48.2[%], and it was not efficient for detailed work. The average illuminance of general lighting and local lighting were 131.41[lx] and 322.57[lx], respectively, and these level were only 54[%] of the lowest illumination standard. This indicates that the lighting levels and the environment are so poor. The satisfaction level of users, however, was relatively high, suggesting insufficient recognition of importancy of lighting for efficient work.

• Korean Journal of Optics and Photonics
• /
• v.35 no.1
• /
• pp.18-23
• /
• 2024

In exhibition spaces such as art museums, lighting should primarily illuminate the walls where exhibits are displayed rather than the floor. Commonly used LED lighting consists of an LED and a diffusion plate that closely resembles a Lambertian light source with uniform light distribution at every angle. This type of illumination focuses on the floor surface where normal incidence occurs. Consequently, this general illumination method is not well-suited for effectively lighting the wall surface. Specifically, to illuminate a wall, it is necessary to increase the light intensity in areas with a large incident angle in the light distribution. In response to this issue, our study proposes an illumination system that uses an ultra wide converter to adjust the divergence angle from the light source to 180 degrees.