• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.61-61
• /
• 2023

우리나라는 여름철 집중호우 시 발생하는 홍수로 인해 중소하천의 확폭(Widening) 및 하안침식이 자주 발생하고 있으나, 이에 대해 홍수 피해 관점으로만 분석되고 있으며 체계적인 수리학적, 지형학적 분석은 미흡한 실정이다. 본 연구에서는 먼저, 1982-2022년의 지도 및 항공사진, 정사영상 등을 분석하여 포항시 신광천과 냉천 중류의 하도 변화를 살펴보고, 2022년 9월 태풍 힌남노의 내습 시 발생한 홍수로 인해 초래된 하도 변화를 분석하였다. 신광천 항사리 지점의 경우, 하천 우안에 제방이 축조되지 않았던 1982년에는 하폭이 상대적으로 넓었으나, 1992년 제방 축조 이후 우안 충적지가 하도에서 분리되며 하폭이 감소하였다. 2011년의 하도는 대부분의 면적이 식생으로 덮여 하천의 흐름이 잘 관찰되지 않으나, 2021년에 식생 제거로 하도가 식별되지만 하폭은 과거에 비해 더욱 감소하였다. 태풍 힌남노 내습 시 포항시의 6시간 누적 강우량은 315.3 mm 로 100년 빈도를 초과하는 집중호우가 발생하였으며, 그 결과 확폭이 발생하였다. 단면에서 보면 좌안 활주사면은 5 m 가량의 퇴적고를 보였고, 우안 공격사면은 평균 23.3 m 측방으로 침식되었다. 그 결과 1982년 하폭과 유사한 수준으로 확대되었다. 문덕리 지점(공장지대)과 냉천 용산리(아파트)의 경우에도 각각 평균 14 m, 18 m 의 하안침식을 보였다. 이러한 결과는 지난 30여 년 전 축조된 기존 제방이 유실되면서 발생한 것으로 홍수로 인해 과거의 하폭으로 복귀할 수 있음을 의미한다. 2022년 홍수에 의한 하도 변화와 같은 지형학적 변화를 고려할 때, 보다 안정적인 하천관리를 위해서는 하천 설계 시 과거 지도상의 하도 범위 및 기왕홍수로 인한 하안선 변동을 고려하는 것이 필요하다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.232-232
• /
• 2023

고속도로 및 편의시설 건설로 불투수층의 면적이 증가하여 강우 시 고속도로 및 편의시설에서 발생하는 오염원에 의한 하천의 수질 영향도 커지고 있다. 특히 휴게소에서는 자동차의 급가속, 급감속으로 더욱 많은 분진과 오염물질이 발생할 수 있으며 타이어 마모 입자, 자동차 배기가스, 중금속 및 오일류 등이 휴게소나 도로 지표에 집적되어 있다. 이렇게 발생한 오염물질은 우기에 강우와 함께 불투수면을 침투하지 못하고 배수로를 통해 유출되어 인근 하천의 수생태 및 토양의 주요 오염원으로 작용하고 있다. 이에 따라 고속도로 및 인근 휴게소의 비점오염 저감대책이 필요하며 효율적인 비점오염원 저감을 위해 장기적인 모니터링, 지속적인 자료 수집 및 분석이 필요하다. 본 연구에서는 강원지역 고속도로 및 인근 휴게소에서 강우 시 강우유출수 모니터링을 통해 강우유출수 유량가중평균농도 (Event Mean Concentration) 산정하고 강우유출수 수문곡선 (hydrograph)을 작성하였다. 또한 강우사상에 따른 분석항목별 초기세척효과(First Flush Effects)와 오염부하량을 산정하였다. 추가적으로 차량 기인 입자를 확인하기 위해 μ-FT-IR 현미경 분석 실험을 하였다. 모니터링 장소는 휴게소 및 고속도로 일원이며, 모니터링은 선행무강우일수 2일 이상, 강우량 10mm 이상일 때 실시하였으며 2022년 6월부터 10월까지 총 4회 실시하였다. 모니터링 결과 타이어 및 브레이크 패드 마모와 관련된 중금속인 Zn, Cu, Pb 등의 중금속이 높게 분석되었으며 이러한 중금속의 오염부하량 역시 높게 산정되었다. 강우유출수 수문곡선에서 강우 초기 오염물질의 세척효과가 나타났다. MFFn 산정 결과 강우 30% 구간에서 초기세척효과를 보였다. μ-FT-IR 현미경 분석 결과 PE (Polyethylene)가 가장 많이 검출되었고 PP (Polypropylene), PS (Polystyrene) 순으로 검출되었다. 이러한 강우유출수 모니터링 데이터는 향후 고속도로 휴게소 및 고속도로 주변 오염저감 시설 설치 및 사회적 동참을 위한 타당한 근거 확보를 위한 기초자료로서 제공될 수 있을 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.256-256
• /
• 2020

하천의 유출률은 하천의 경사, 연장, 강우특성 및 규모 등에 따라 크게 영향을 받으므로, 제주도의 지역별 고도별 토양 및 강우 특성과 독특한 지형에 따른 간헐하천의 유출특성을 고려할 때 관측에 의해 유출특성을 파악하는 것은 현실적으로 어렵다. 특히나 홍수시 관측되는 유량의 불확실성과 지역별·고도별 강우량의 편차를 고려한다면 강수대비 정확한 관측유출률의 산정 자체가 쉽지 않다. 이는 기존 관측된 유출률이 하천유역별로 대상기간별로 차이가 크게 나타나는 것을 통해서도 알 수 있다. 따라서 특정 지점에서의 몇 개의 강우사상에 대한 유출률이 아닌 다양한 사상과 지역적 특성을 고려한 유출특성을 파악하기 위해서는 모델링에 의한 접근법이 필요하다. 본 연구에서는 제주도 하천유역에서의 건천화 현상과 간헐적 유출특성을 모의하는데 최적화된 제주형 SWAT-K 모형을 기반으로 제주도 11개 하천유역(유역면적 30 ㎢ 이상)에 대한 유출특성을 분석하였다. 유출률을 중심으로 계절별, 지역별, 하천유역별 차이를 비교 분석함으로써 강우규모에 따른 유출 특성과 시·공간적 유출률 변화를 평가하였다. 1992~2013년 기간에 대해 분석한 결과 제주도 전역에 대한 연간 유출률은 13.3%~30.5% (평균 21.8%)로 나타났다. 하천유역별로는 천미천(31.6%), 가시천(31.1%), 화북천(29.3%), 창고천(27.4%), 의귀천(27.1%)의 유출률이 상대적으로 크게 나타났으며, 효돈천(18.9%)와 도순천(19.0%)은 상대적으로 낮은 것으로 분석되었다. 11개 하천유역에 대한 월별 평균 유출률은 강수량이 많은 8월에 가장 높은 유출률(26.1%)을 보였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.143-149
• /
• 2010

The river master plan was established every 10 years in Korea. The basin characteristics of 62 small and medium size rivers of which master plans were recently established during the past three years in Gyeonggi-do were investigated, and design rainfalls and design floods in the past and the latest were compared and analyzed. It was predicted that basin data and flood estimating method changed design flood. The quantitative amount of design floods were analyzed for 6 basins like Gungunchen etc. As the results, the increasing factors of design flood were the application of critical duration time, temporal time of rainfall and the increase of CN value. The decreasing factors of design flood were the application of Huff's rainfall distribution instead of Mononobe one and the ARF. The application of critical duration time increased flood about 60% whereas the application of Huff's rainfall distribution method estimated less flood than Mononobe about 62%. Considering critical duration time and changing rainfall distribution were the most important factors of increasing or decreasing design flood. However, trends of flood variation were differently analyzed by factors in 6 basins because characteristics of topography, weather, hydrology and hydraulic were different, now that correlations were not found between factors and flood variation. Flood variation is evaluated by complex effects of factors so new flood recalculated by reasonable methods should be considered as design flood.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.68-81
• /
• 2014

This study aims to apply and evaluate the automatic DAD analysis method, which is able to establish the depth-area relationship more efficiently and accurately for point-to-areal rainfall conversion. First, the proposed automatic DAD analysis method tracks the expansion route of area from the storm center, and it is divided into Box-tracking, Point-tracking, Advanced point-tracking according to tracking method. After applying the proposed methods to 10 events occurred in Yongdam-watershed area, we confirmed that the Advanced point-tracking method makes it possible to estimate the maximum average areal rainfal(MAAR) more accurately with consideration of the storm movement and the multi-centered storm. In addition, Advanced point-tracking could reduce the errors of the estimated MAAR induced by increasing the area because it can estimate MAAR for each storm center and compare them at the same time. Finally, the DAD curve for the study area could be derived based on the DAD analysis of the selected 10 events.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.324-333
• /
• 1983

Modeling of longterm runoff is theoritically based on waterbalance analysis. Simplified equation of water balance with rainfall, evapotranspiration and soil moisture storage could be formulated into regression model with variables of rainfall, pan evaporation and previous-month streamflow. The hydrologic response of water shed could be represented lumpedly, qualitatively and deductively by regression coefficients of water-balance regression model. Characteristics of regression modeling of water-balance were summarized as follows; 1. Regression coefficient $b_1$ represents the rate of direct runoff component of precipitation. The bigger the drainage area, the less $b_1$ value. This means that there are more losses of interception, surface detension and transmission in the downstream watershed. 2. Regression coefficient $b_2$ represents the rate of baseflow due to changes of soil moisture storage. The bigger the drainage area and the milder the watershed slope, the bigger b, value. This means that there are more storage capacity of watershed in mild downstream watershed. 3. Regression coefficient $b_3$ represents the rate of watershed evaporation. This depends on the s oil type, soil coverage and soil moisture status. The bigger the drainage area, the bigger $b_3$ value. This means that there are more watershed evaporation loss since more storage of surface and subsurface water would be in down stream watershed. 4. It was possible to explain the seasonal variation of streamflow reasonably through regress ion coefficients. 5. Percentages of beta coefficients what is a relative measure of the importance of rainfall, evaporation and soil moisture storage to month streamflow are approximately 89%, 9% and 11% respectively.

• Korean Journal of Ecology and Environment
• /
• v.41 no.1
• /
• pp.43-53
• /
• 2008

This study was conducted to simulate storm hydrographs on a small forested watershed using TOPMODEL, which is a distributed hydrological model. The Myeongseong watershed, which is 58.3 ha in size, was selected to monitor rainfall and runoff data. The Monte Carlo simulation was also used to calibrate parameters of TOPMODEL. Six rainfall-runoff pairs collected at the watershed in the year 1997 were used for parameter calibration, and eight rainfall-runoff pairs collected during the period of $1998\sim1999$ were used for validation effort. The errors of runoff volume ranged from -2.74% to 1.81%, and an average value of model efficiency in terms of runoff volume was 0.92 for the calibration period. The average value of observed peak discharge was $0.324m^3\;s^{-1}$ for six rainfall-runoff pairs, while the prediction value was $0.295m^3\;s^{-1}$. The simulation errors of peak discharge varied according to rainfall characteristics and antecedent condition, within ranges of -27.65% to -1.13%. The model efficiency for the validation period was 0.92. For the validation period, observed peak discharges have an average value of $0.087m^3\;s^{-1}$ and average value of simulated peak discharge was $0.090m^3\;s^{-1}$. Observed and simulated values of time to peak for the calibration period were 18.3 hrs and 11.0 hrs, respectively, and 16.6 hrs and 13.5 hrs, respectively, for the validation period.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.129-143
• /
• 2014

The purpose of this study is to evaluate the availability of dual-polarization radar rain for flood routing in Chungju Dam watershed($6,625.8km^2$) using KIMSTORM (Grid-based KIneMatic wave STOrm Runoff Model). The Sobaek dual-polarization radar data for 1 heavy rain and 3 typhoon(Khanun, Bolaven, and Sanba) events in 2012 were obtained from Han River Flood Control Office. The spatio-temporal patterns between the two data were similar showing the ratio of radar rain to ground rain with 0.97. The KIMSTORM was set to $500{\times}500m$ resolution and a total of 45,738 cells(198 rows${\times}$231 columns) for the watershed. For radar rain and 41 ground rains, the model was independently calibrated using discharge data at 3 streamflow gauging stations(YW1, YC, and CJD) with coefficient of determination($R^2$), Nash and Sutcliffe Model Efficiency(ME), and Volume Conservation Index(VCI). The $R^2$, ME, and VCI 0.80, 0.62 and 1.08 for radar rain and 0.83, 0.68 and 1.10 for ground rain respectively.

• Journal of Korea Water Resources Association
• /
• v.39 no.9 s.170
• /
• pp.779-786
• /
• 2006

In this study, we propose a new method that utilizes rainfall data in and out of a basin, which is greater than 25.4mm for point rainfall or 12.7mm for areal mean rainfall respectively. From our analysis, most frequent quartile for point and areal mean rainfall were found to be the same in general for various rainfall duration intervals. From an evaluation of design rainfall per each rainfall duration distributed in time by the MOCT(Ministry of Construction and Transportation) version of Huff's method and this study, peak rainfall intensity by this study was found to be greater than the one by MOCT, but there were no consistent increase or decrease of this difference with rainfall durations. Using the distributed design rainfall per each duration by MOCT and this study, corresponding flood inflow hydrographs were simulated and compared each other. Contrary to the case of peak rainfall intensity, difference in peak flow by both methods per each rainfall duration started to increase from about 12-hr duration. Especially, the difference in peak flow was significant when critical rainfall duration was considered, and this trend was similar for peak flows of other rainfall durations. Therefore, the method proposed in this study is thought to be the effective procedure for the construction of dimensionless cumulative rainfall curve that is representative of a basin while considering time distribution characteristics for different rainfall durations.

• Journal of Korea Water Resources Association
• /
• v.45 no.10
• /
• pp.1035-1041
• /
• 2012

This paper is on the decision of design magnitude for flood control of urban basin, based on flooding characteristic values. In Korea, a design magnitude for flood control is established based on peak discharge of the outlet of basin. However, this method is inappropriate in an urban basin because sewerage only can flow out as much as it could and other discharge overflow to basin. In order to calculate a design magnitude for flood control of an urban basin, flooding characteristic values (peak discharge of pipe, average flooded depth, maximum flooded depths of an important point, flooded area, flooded volume, flooded time) were used as a tool. Using the Gwanghwamun Square as an example, a methodology was proposed that used XP-SWMM 2010 model as a platform to predict urban flood disaster. It can help other local government and residents to better understand, prepare for and manage a flood in urban environments.