• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.552-559
• /
• 2023

The purpose of this study is to evaluate the crack reduction performance of blast furnace slag concrete mixed with expansive and swelling admixtures. As a basic performance test, various ingredients such as blast furnace slag fine powder (BFS), calcium sulfoaluminate (CSA), bentonite, and hydroxypropyl methyl cellulose (HPMC) were used, and the results showed that bentonite showed superior performance compared to HPMC. Afterwards, a MOCK-UP test was conducted to evaluate cracking and drying shrinkage according to the mixing ratio. As a result, when bentonite and a small amount of calcium phosphate were added, drying shrinkage was reduced and cracking was reduced. In particular, a cement mixture consisting of 30 % BFS, 1 % bentonite, and 1 % calcium phosphate showed optimal crack-free performance. It is believed that BFS concrete will contribute to compensating for shrinkage through continuous expansion activity and can be used for field applications.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.35-43
• /
• 2010

We have developed a sodium fluoride containing gelatin and methyl cellulose gel. Cariostatic abilities of those gel were investigated and compared with APF gel and fluoride varnish($Cavityshield^{TM}$). We prepared the bovine tooth samples and divided into two surface, control side and experimental side in same specimen for exclusion of difference between specimens. The experiment was consisted of 4 groups : (I) APF gel : (II) $Cavityshield^{TM}$ : (III) Gelatin F gel : (IV) Methyl cellulose F gel Decalcification were produced by placing each specimen into artificial acidic solution(pH 4.0) for 72 hours. Surface microhardness were measured and depth of demineralization lesion were measured by polarizing light microscope. The results were as follows: 1. The difference of VHN between control and experimental side is smallest in group I (p<0.05). 2. The largest difference was shown in group II (p<0.05). 3. There were no significant difference between group III and IV in microhardness test (p>0.05). 4. The difference of lesion depth is smallest in group I (p<0.05). 5. There were no significant difference between group II, III and IV in lesion depth (p>0.05). The result of the present study indicate that the fluoride containing gelatin and methyl cellulose gel is more effective than APF gel and is similar to fluoride varnish application for prevention of demineralization.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.28-34
• /
• 2004

This study was performed to evaluate the characteristics of the carboxymethylated substrate from high reactive autohydrolyzed cellulose (HRC) and those of commercial α-cellulose (CAC) and refiner mechanical pulp (RMP). Saccharification rates of HRC substrate were achieved over 70% with 12 hr hydrolysis, about 90% with 24 hr, and 99.5% with 72 hr. CMCase and avicelase activities of cellulase onozuka were 4.09 ㎛ G/mg·min and 14.0 ㎛ G/mg·min, respectively. There were no any significant changes in cellulase activities with this substrate. The saccharification rates of CAC and RMP were very low, 57% and 38% with 72 hr, respectively. Those lignin-zero autohydrolyzed substrates, HRC and CAC, were highly carboxymethylated at the high alkali concentration, near 30%, for 3 hr. reaction, and resulted in 1.13-1.15 of D.S., besides 0.85 of D.S. from RMP. Water solubilities of carboxymethylated substrates were increased with an increase of D.S., 98-98.5% from HRC and CAC and 31.5% from RMP. RMP which has low specific surface area showed lower water retention values, compared to high values of 435 and 321% from CAC and HRC, respectively. There were no direct relationship between surface area and swelling ratio of the substrates.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.581-585
• /
• 1999

The surface treated hydroxypropyl methylcellulose(HPMC) which could adjust the soluble time was synthesized when 40 wt % glyoxal solution and $KH_2PO_4$ were sprayed and reacted. And also, the solution dynamic at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion characteristics at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion was observed in the neutral solution and the viscosity was increased after directly dissolved as the solution become alkali condition. But the fine-powder type of HPMC which reacted with glyoxal and $KH_2PO_4$ was dispersed regardless of pH of solution and observed that it was dissolved and its viscosity increased after elapsing some time. With increasing amount of glyoxal and $KH_2PO_4$, the soluble time was delayed. The reaction condition was about 60 min at $75{\sim}85^{\circ}C$. Especially, the removal process of organic solvent after reaction was not required due to reaction under water solution without organic during glyoxal and $KH_2PO_4$ treatment. And also, the HPMC which could adjust the soluble rate in water or organic solvent by changing the degree of substitution of HPMC was synthesized.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.311-316
• /
• 2008

Calcium phosphate cement (CPC) has been used as bone substitute successfully due to good biocompatibility and osteoconductivity. One of the important mechanical characteristics of CPC is flowablility, which can be evaluated by measuring rheological parameters. However, there have been few studies that measured rheological properties of CPC. The purpose of this study was to evaluate the rheological properties of CPC paste mixed with 2 kinds of setting solutions, 2% hydroxyprophyl methylcellulose (HPMC) and 35% polyacrylic acid (PAA). The CPC used was dicalcium phosphate dihydrate (DCPD). Rheological properties of CPC paste were measured using rheometer. The statistical analysis was carried out with Mann-whitney test with Bonferronis collection. CPC with both setting solutions showed shear thinning behavior. CPC with 2% HPMC showed signigicantly higher complex viscosity than CPC with 35% PAA(p<0.05).

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.269-273
• /
• 2010

The primary objective of this work is to find the optimal condition for the granule tablet formulation of alfuzosin-HCl that aims to achieve a sustained drug release. (Hydroxypropyl)methyl cellulose (HPMC) is one of the most widely used polymer as a drug formulation and therefore has been utilized in this study as an excipient. Alfuzosin-HCl granule tablet was developed using the various viscosities of HPMC and the effects of viscosity on drug release was investigated. Fourier transform-infrared (FTIR) and X-ray diffraction (XRD) were employed to investigate the chemical structure and crystallization of alfuzosin-HCl in the formulation. We prepared the granule tablet by a direct compression method and studied the release profile in the stimulated intestinal fluid (pH 6.8). As the viscosity of HPMC increased the release of alfuzosin-HCl decreased, demonstrating that controlled release of alfuzosin-HCl can be achieved by varying the viscosity of HPMC.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.11
• /
• pp.1146-1152
• /
• 2005

Graft copolymers were synthesized from methylcellulose(MC) and acrylic acid(AA) with active carboxyl groups in the presence of potassium persulfate($K_2S_2O_8$) initiator to enhance adsorption capacity of toxic heavy metal such as $Pb^{2+}$ and $Cu^{2+}$ from wastewater. The resulting grafted copolymers(MC-g-AA/PAA) were mixture of the graft copolymers from MC and AA(MC-g-AA) and polyacrylic acid homopolymers(PAA). The degree of palling was increased with rising concentration of monomer and initiator under the reaction conditions at $60^{\circ}C$, 3 hrs. The water insoluble property of MC-g-AA showed more than 19.7% degree of grafting. So that it could be an adsorbent of heavy metals. Adsorption characteristics of the MC-g-AA were evaluated depending on the degree of grading, pH of wastewater, adsorption time, dosage of MC-g-AA and concentration of heavy metals in the different conditions. Degree of grafting, and initial concentration of heavy metal ions increased, the adsorption amount of $Pb^{2+}$ and $Cu^{2+}$ increased, but added MC-g-AA increased, the adsorption amount per unit weight of $Pb^{2+}$ and $Cu^{2+}$ decreased. The MC-g-AA showed the high $Pb^{2+}$ and $Cu^{2+}$ adsorption amount in the range pH $4{\sim}6$. Also all of $Pb^{2+}$ and $Cu^{2+}$ ions reached in adsorption equilibrium in neighborhood 4 hours. The adsorption of heavy metals described by Freundlich isotherm, it was determined the value of l/n of $Pb^{2+}$ and $Cu^{2+}$ that 0.4294 and 0.3453, respectively.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.421-430
• /
• 2009

This research was carried out focusing on the urgent treatment and related studies for paint scribbling on Samjeondobi Monument (Historic Sites No. 101) in 2007. Before the preliminary test, the paint lacquer used on the surface of Samjeondobi Monument was analyzed. The paint lacquer turned out to be the paint lacquer spray composed of $Pb_3O_4$ used for the red pigment in the market. It was proved that the poultice used with the organic solvent was the best way to remove the paint pollutants following the preliminary test for the removal of paint pollutants which was performed with various removal methods by the laser, etc. However, the removing the paint pollutants was found in difficulty in contrast to the preliminary tests because the paint on the spot was hardened so rapidly over time that there was difference from the situation of the laboratory. For that problem, the poultice method with ethylene dichloride of main component from Remover (goods in the market) was the most efficient, therefore the pollutants were removed with the solution of alkyds resin and nitrocellulose and the rest part was removed by the $Laponite^{(R)}$ RD.

• Membrane Journal
• /
• v.15 no.3
• /
• pp.213-223
• /
• 2005

We prepared an anti-adhesion membrane made of sodium hyaluronate/sodium carboxymethylcellulose (HA/CMC) and evaluated its effectiveness for adhesion prevention in a rat model. The anti-adhesion membrane was prepared by lyophilizing HA/CMC solution and cross-linking properly with 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDAC). In a cecum/abdominal wall abrasion model of Sprague-Dawley rat, cecal serosa and abdominal wall were abraded in $1\times2\;(cm^2)$ with a bone burr after peritoneal midline incision and sutured at 3 points around the injured surface. The denuded cecum was covered with HA/CMC membrane (experimental group), or nothing (control group) and apposed to the abdominal wall. Most of the control group represented 3 or more of adhesion grade at POD 7, 14, 21, and 28, whereas $60\~70\%$ of the experimental group was 2 or less of adhesion grade at 14, 21, and 28. It was similar in the adhesion strength. In a general manner, the adhesion grade and strength showed gradual increasing until POD 14, almost same or a little increasing POD 21, but decreasing POD 28. Also the control group was much higher in adhesion grade, strength, and area than the experimental group. It is expected that the anti-adhesion membrane will have a good clinical result in postoperative adhesion prevention.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.48-48
• /
• 2011

국내 염색가공업에 종사하는 중소기업은 약 1,700여개 업체로써, 평균 50억/년 매출을 하고 있으며, 생산의 대부분을 임가공에만 의존하고 있는 실정이다. 이들 염색가공업체들은 섬유제품의 품질 향상 등을 위해 전처리, 염색, 가공이라는 섬유습식공정을 행하게 되는데 그 공정이 따로 분리되어 있어 임가공 업체 입장에서는 시간과 비용 차원에서 비효율적인 면이 존재하여 왔다. 따라서 공정합리화, 원가합리화를 위해 따로 분리되어 있는 위 공정을 통합하려는 시도를 많이 했지만 전처리/염색 공정의 통합에서 일부 성과가 있었을 뿐 효과면에서는 아직 미흡한 실정이다. 또한 가공이란 공정은 그사용 약제의 특수성에 따라 기존 Padding-Drying-Curing이라는 3 step process를 반드시 필요로 하고 있기 때문에 가공 공정의 통합은 시도조차 이루어지지 않고 있는 것이 현실이다. 따라서 염색공정과 가공공정의 통합을 시도하기 위해서는 관련 약제 개발이 출발이라 할 수 있으며 그 첫 대상은 염색 공정의 소핑과 가공공정의 유연처리를 동시에 행할 수 있는 소핑유연제로 선정하려 한다. 즉 셀룰로오스계 섬유의 반응성 염색 후 소핑 공정에서 일액형 소핑유연제, 한가지 제품만을 간편하게 사용해도 소핑효과와 유연효과를 동시에 얻어 후속 유연처리 공정을 생략할 수 있는 것이다. 그렇게 되면 시간적으로나 비용적으로 큰 절감 효과를 가져와 임가공 업체의 부담을 덜어 줄 수 있을 뿐만 아니라 공정 통합을 통해 배출되는 폐수의 양도 상당량 감소시킬 수 있을 것으로 기대된다. 본 연구 결과, 폴리옥시에틸렌 트리데실 에테르 타입의 계면활성제와 개질된 디메틸폴리실록산 계열의 실리콘 오일, 그리고 이들의 상용성을 확보하기 위한 특수 용제 및 첨가제를 최적의 비율로 배합하여 안정한 일액형 복합 소핑유연제를 제조할 수 있었다. 제조된 소핑유연제는 유백색 반투명 액상의 외관을 가지며 pH(10%solution)는 $7{\pm}1$, 고형분은 $13.5{\pm}0.5%$이었다. 이 소핑유연제의 성능 평가결과, 소핑력은 기존의 소핑제와 동등 수준으로 세탁견뢰도 4급이상의 성능을 보였고, 유연성 면에서도 기존의 유연제와 동등 수준으로 평가되었다. 이로써 기존의 분리된 소핑 공정과 유연공정을 개발된 제품을 이용하여 통합할 수 있어 염색현장의 비용절감, 공정단축의 효과를 기대할 수 있게 되었다.