• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.11a
• /
• pp.113-116
• /
• 2003

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2005.09a
• /
• pp.7-10
• /
• 2005

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.3
• /
• pp.425-434
• /
• 2023

An analysis was conducted on landfill gas generation and surface emission by major routes for three landfill sites of S Landfill in the metropolitan area. LS1, which had a total landfill gas generation ratio of 10.9%, accounted for 49.4% of the total surface emissions. The total surface emission of methane alone was 13.6 Nm³/min in the three landfill sites. Among them, the surface emission of methane at LS1, LS2, and LS3 was 8.4(61.7%), 4.0(29.4%), and 1.2 Nm³/min(8.9%), respectively. By emission path in the upper, slope, and dike, it was 7.3(53.2%), 6.4(46.7%), and 0.02 Nm³/min(0.1%). The dike section of the major surface emission areas showed the largest oxidation rate at 87.5%, followed by the upper at 72.3%, and the slope at 71.8%. Based on methane generation, LS1 had the largest surface emission contribution rate, with 61.7% of the total by S Landfill. By major emission path, the slope section of LS1 accounted for 41.7% of the total, the upper section of LS2 24.4%, and the upper section of LS1 20.0%, which accounted for 86.1% of the total methane surface emission of S Landfill. Therefore, it is concluded that intensive management will be necessary.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.45-48
• /
• 2007

Thermochemical 2-step methane reforming, involving the reduction of metal oxide with methane to produce syn-gas and the oxidation of the reduced metal oxide with water to produce pure hydrogen, was investigated on ferrite-based metal oxide mediums and $WO_{3}/ZrO_{2}$. Thermochemical 2-step methane reforming were accomplished at 900 $^{\circ}C$(syn-gas production step) and 800 $^{\circ}C$(water-splitting step). In syn-gas production step, it appeared carbon deposition on metal oxides with increasing react ion time. Various mediums showed the different starting point of carbon deposition each other. To minimize the carbon deposition, the reaction time was controlled before the starting point of carbon deposition. As a result, $CO_{x}$ were not evolved in water-splitting step, Among the various metal oxides, $Mn-ferrite/ZrO_{2}$ showed high reactivity, proper $H_{2}/CO$ ratio, high selectivity of undesired $CO_{2}$ and high evolution of $H_{2}$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.5
• /
• pp.473-481
• /
• 2007

Compared to other types of fuel cells, SOFC has advantages like a wide output range and the direct use of hydrocarbon fuel without the process of external reforming. Particularly because the direct use of fuel without reforming reaction is closely linked to overall system efficiency, it is a very attractive advantage. We tried the operation with methane. However, although methane has a small number of carbons compared to other hydrocarbon fuels, our experiment found the deposition of carbon on the surface of the SOFC electrode. To overcome the problem, we tried the operation through activating internal reforming. The reason that internal reforming was possible was that SOFC runs at high temperature compared to other fuel cells and its electrode is made of Ni, which functions as a catalyst favorable for steam reforming.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.5
• /
• pp.11-16
• /
• 2010

Methane hydrate is crystalline ice-like compounds which formed methane gas enters within water molecules composed cavity and each other from physically-bond at specially temperature and pressure condition. $1m^3$ of methane hydrate can be decomposed into the maximum of $216m^3$ of methane gas under standard condition. If these characteristics of hydrate are utilized in the opposite sense, natural gas can be fixed into water in the form of a hydrate solid. Therefore the use of hydrate is considered to be a great way to transport and store natural gas in large quantity. However, when methane hydrate is formed artificially, the amount of gas that is consumed is relatively low, due to the slow reaction rate between water and methane gas. Therefore for practical purposes in the application, the present investigation focuses on increasing the amount of gas consumed by adding chemically oxidized OMWCNTs to pure water. The results show that when 0.003 wt% of oxidation multi-walled carbon nanotubes was added to pure water, the amount of gas consumed was almost four times more than that of pure water indicating its effect in hydrate formation and the hydrate formation time decreased at alow subcooling temperature.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.12
• /
• pp.769-775
• /
• 2011

Methane hydrate is formed by physical binding between water molecules and methane gas, which is captured in the cavities of water molecules under the specific temperature and pressure. $1m^3$ hydrate of pure methane can be decomposed to the methane gas of $172m^3$ and water of $0.8m^3$ at standard condition. Therefore, there are a lot of practical applications such as separation processes, natural gas storage transportation and carbon dioxide sequestration. For the industrial utilization of hydrate, it is very important to rapidly manufacture hydrate. So in this study, hydrate formation was experimented by adding THF and oxidized carbon nanotubes in distilled water, respectively. The results show that when the oxidized carbon nanofluids of 0.03 wt% was, the amount of gas consumed during the formation of methane hydrate was higher than that in the THF aqueous solution. Also, the oxidized carbon nanofluids decreased the hydrate formation time to a greater extent than the THF aqueous solution at the same subcooling temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.81-81
• /
• 2010

태양광 또는 자연의 힘을 이용한 에너지의 생산은 가까운 미래에 화석연료의 고갈과 이들의 소모로 인해 발행하는 이산화탄소로 인한 지구 온난화등의 문제로 인하여 그 중요성이 점증되고 있는 실정이다. 특히 태양광으로부터 전기에너지를 얻는 발전 방식은 오래전부터 연구되어 왔고 또한 상용화되어 국부적으로 보조 에너지원으로 이용되어 지고 있다. 동작 원리에 따라 이종접합에서 오는 전위차를 이용하는 방법, 동종 물질의 pn접합을 이용하여 기전력을 얻은 방법 및 연료 감응형 종류가 있다. 이 중에서 물질의 이종접합을 이용하는 방법은 아주 오래된 태양전력을 얻는 방식이나 그 동안 연구가 미비하였던 것이 사실이다. 이에 우리는 새로운 재료인 그래핀을 이용하여 산화구리와의 이종접합 태양전지의 제작및 특성을 분석 하였다. 화학기상증착법 (CVD)을 이용해 그래핀을 구리 박편 표면에 성장하였다. 적절한 온도(섭씨 약 1000도)에서 아주 적은 양의 수소 및 메탄을 흘려 주었을때 손쉽게 단일 원자층의 그래핀이 코팅된 구리박편을 얻을 수 있으며, 이 박편을 고온에서 산화 시키면 그래핀은 산화되지 않고 구리만 산화되어 손쉽게 쇼트키타입 태양전지를 얻을 수 있다. 이때 그래핀은 다른 공정 없이 투명전극의 역할을 한다. 간단한 전극을 부착하여 태양전지를 성능을 평가 하였고 그래핀 및 산화구리의 계면효과를 분석하였다. 효율면에서 III-V족 및 실리콘계의 태양전지에 비해 떨어지나 산화구리의 결정화 순도및 산화구리와 금속간의 계면개선 연구를 통해 극복가능 할 것으로 생각된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.78-78
• /
• 2010

그래핀(Graphene)은 탄소원자가 육각형 벌집(honeycomb)구조로 빼곡히 채워진 2차원의 단원자 층으로 역학적 강도와 우수한 화학적/열적 안정성 및 흥미로운 전기 전도 특성을 가지고 있다. 이러한 그래핀의 우수한 특성으로 인하여 현재 기초연구뿐만 아니라 응용연구 등 많은 연구들이 진행되고 있다. 일반적으로 그래핀의 우수한 물리적 특성들은 그래핀의 층수, 모서리(edge)구조, 결함(defect), 불순물 등에 의해 크게 좌우되는 것으로 알려져 있다. 따라서 그래핀의 구조 및 결함정도를 자유로이 제어하고 그에 따르는 특성 변화를 관찰하는 것은 기초연구의 측면에서 뿐만 아니라 향후 그래핀 응용에 있어서도 매우 중요하다고 할 수 있다. 본 연구에서는 그래핀의 내산화 특성을 연구하기 위하여, 그래핀을 열 및 플라즈마 산화 분위기에 노출시킨 후, Raman 분광법을 이용하여 광학적, 구조적 변화를 분석함으로써 그래핀의 내산화 특성에 대하여 조사하였다. 그래핀은 실리콘 웨이퍼에 전자빔증착법으로 니켈박막을 증착한 후 열화학증기증착법으로 합성하였으며, 메탄가스를 원료가스로 $900^{\circ}C$ 전후에서 합성하였다. 합성한 그래핀은 산화반응 시 기판의 영향을 제거하기 위하여 트렌치 구조의 기판 위에 전사(transfer)함으로써 공중에 떠있는 구조를 구현하였다. 열 산화의 경우, 합성한 그래핀을 대기분위기의 고온($500^{\circ}C$) 챔버에 넣고 처리시간에 따른 특성변화를 살펴보았다. 플라즈마 산화의 경우는 공기를 이용하여 직류플라즈마를 발생시킨 후 0.4 W의 낮은 플라즈마 파워를 이용하여 플라즈마 산화처리와 특성평가를 매회 반복하였다. 그래핀의 특성분석은 Raman분광기와 광학현미경, 원자힘현미경(AFM) 등을 이용하여 분석하였으며, 상기 결과들은 향후 산화환경에서의 그래핀 응용소자 개발에 유용할 것으로 예상된다.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.74-80
• /
• 1994

Synthesis of benzophenone by oxidation of diphenylmethane at room temperature is studied using Aliquat 336 as phase transfer catalyst and potassium tert-butoxide as base. No other study has shown that diphenylmethane can be oxidized to benzophenone with quaternary ammonium salt as phase transfer catalyst. However, in presence of Aliquat 336, higher than 30% of benzophenone was yielded. The conversion of diphenylmethane was increased with increasing amount of Aliquat 336 and Potassium tert-butoxide. Higher partial pressure of oxygen favored conversion of diphenylmethane and selectivity of benzophenone by increasing the concentration of oxygen in organic solvent A reaction mechanism involving the role of Aliquat 336 was also proposed.