• Journal of Korea Multimedia Society
• /
• v.16 no.10
• /
• pp.1196-1203
• /
• 2013

In general, the cost of transceiver for wireless network configuration is more expensive than that for wired network. However, in case of environmental management system in a tunnel, the cost can be minimized by adopting low rate tranceiver because the amount of the exchanged data for tunnel monitoring is very small. When the obtained data from sensor node is sent directly to the corresponding command node, there is no need to consider routing problem of the data transfer. However in this case, sensor nodes are required to be implemented with high power transmitter and experience high energy consumption. To tackle this problem, relay nodes can be used to transfer the data of tunnel monitoring, and suitable routing protocols for selecting optimum path are needed. Therefore, in this paper, we propose a routing algorithm and a self-configuration protocol for environment management system in tunnel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.141-150
• /
• 2013

Simulation is an important technique to test and verify routing protocol correctness. However, simulation does not guarantee that the protocol works expectedly on a real world environment because it needs to rely on assumptions and simplified properties such as radio characteristics and effects of geographical constraints that may not reflect the real world networking environments. Therefore, a real world experiments are necessary to gain a practical insight into the actual performance of ad hoc networks. In this paper, we build a test-bed to evaluate multi-hop ad hoc networks for high speed video streaming inside a building using AODV-UU routing protocol. Our observation indicates that the considered ad hoc network can provide a sufficient performance for a low rate streaming data in terms of throughput, PDR (Packet delivery ratio) and the average delay.

• Journal of Internet of Things and Convergence
• /
• v.1 no.1
• /
• pp.1-4
• /
• 2015

This paper aims to present the mathematical model to find the mean web object transfer latency in the slow-start phase of TCP congestion control mechanism, which is one of the main control techniques of Internet. Mean latency is an important service quality measure of end-user in the network. The application area of the proposed latency model is the narrowband environment including multi-hop wireless network and Internet of Things(IoT), where packet loss occurs in the slow-start phase only due to small window. The model finds the latency considering initial window size and the packet loss rate. Our model shows that for a given packet loss rate, round trip time and initial window size mainly affect the mean web object transfer latency. The proposed model can be applied to estimate the mean response time that end user requires in the IoT service applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2826-2834
• /
• 2013

In mobile ad hoc networks (MANET), power-saving technology of mobile nodes is divided into transmit power control (TPC), power-saving mode (PSM), and routing. TPC and PSM are operated in physical layer but the routing is managed in network layer, so the design of a joint algorithm is needed to provide better performance. Therefore, in this paper, we propose a joint power-saving and routing algorithm for maximizing the network lifetime while satisfying the end-to-end data rate in ad hoc networks. The proposed algorithm first applies the TPC or PSM to reduce the power consumption of mobile nodes and then performs the routing by considering the decided node lifetime in order to maximize the path lifetime. Simulation results show that the proposed algorithm maximize the lifetime while satisfying the required rate according to the number of mobile nodes and the level of interference.

• The KIPS Transactions:PartC
• /
• v.13C no.7 s.110
• /
• pp.897-904
• /
• 2006

In large-scale MANETs, the performance of MANET routing protocols is degraded significantly. To avoid this, zone-based hierarchical architecture is proposed. In this architecture, single large-scale MANET is divided into multiple small-scale MANETs. In this paper, we propose autoconfiguration-coupled MANET routing protocol to reduce routing overhead of mim user nodes. If MANET routing protocol utilizes the autoconfigured information of each user node, its overhead or procedure can be reduced. Proposed method shows the degradation of routing overhead of user nodes via simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1201-1206
• /
• 2007

In this paper, we propose an algorithm that improve network lifetime by adjusting cluster size according to location information of sensor node in wireless sensor network (WSN) using clustering algorithm. The collected sensing information by sensor nodes in each cluster are transferred to sink node using inter-cluster communications method. Cluster head (CH) that located nearby sink node spend much more energy than those of far from sink node, because nearer CH forwards more data, so network lifetime has a tendency to decrease. Proposed algorithm minimizes energy consumption in adjacent cluster to sink node by decreasing cluster size, and improve CH lifetime by distributing transmission paths. As a result of mathematical analysis, the proposed algorithm shows longer network lifetime in WSN.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1191-1194
• /
• 2007

이동 애드혹 네트워크 (MANET)는 기지국과 같은 인프라 없이 구성된 무선 네트워크로 멀티 홉 무선통신을 수행할 수 있다. MANET에서 경로 끊김이 발생하는 이유는 일반적으로 경로를 설정하고 있는 노드들의 이동이나 hidden terminal 과 같은 무선 채널 충돌 때문이다. 무선 채널 충돌처럼 노드들의 위상과 상관없이 패킷들의 충돌 때문에 경로 끊김이 발생하는 현상은 불필요한 경로 재설정이 유발된다. 그리고 이에 따른 제어 메시지의 과도한 생성은 전체 네트워크의 오버헤드를 증가시켜 성능 감소로 이어진다. 특히 일반적으로 MANET에서 사용하는 reactive 방식의 라우팅 프로토콜을 사용하는 네트워크에서는 더 많은 성능 감소가 일어나게 된다. 본 논문에서는 MANET의 이러한 불필요한 경로 재설정을 방지하여 자원을 보다 효율적으로 사용할 수 있는 노드 이동 감지 기법을 제안한다. 이 기법은 HELLO 메시지와 이웃 노드 테이블을 이용하여 무선 채널 충돌과 같은 현상을 예측하고 효율적으로 대처할 수 있게 한다. 성능 분석 결과, 본 논문에서 제안한 노드 이동 감지 기법이 기존 방법들에 비해 패킷 전송률과 라우팅 오버헤드 측면에서 우수한 성능 결과를 보였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.876-882
• /
• 2009

In this paper, we propose a sub-cell coverage control algorithm for enhancement of the cell throughput in OFDMA based relay systems. Relay station (RS) is exploited for improved quality of the received signal in cellular communication systems, especially in shadow areas. However, since a RS requires additional radio resource consumption for the link between the base station (BS) and the RS, we have to carefully control the coverage areas if a mobile station (MS) is serviced via the BS or the RS considering the cell throughput. We consider radio resource reuse as well for the sub-cell coverage configuration by applying various reuse patterns between RSs. We also consider a time varying system by adaptively changing the threshold for coverage depending on the MSs' traffic in the cell. We initially determine the sub-cell coverage of the system depending on the ratio of received signal-interference-noise-ratio (SINR) of the MS from the BS and RSs, respectively. Then, the "sub-cell coverage threshold" varies based on the "effective transmitted bits per sub-channel" with time. Simulation result shows that the proposed "time varying coverage control algorithm" leads to throughput improvement compared to the fixed sub-cell coverage configuration.

• Journal of Korea Multimedia Society
• /
• v.10 no.9
• /
• pp.1165-1174
• /
• 2007

Mobile ad hoc networks suffer from the re-construction of the routing path as a node on the path moves away and/or fails. In this paper we propose a multipath routing scheme, designed for the network based on the directional antennas, in which a new path is quickly recovered by do-touring to an alternative neighbor called braid. Simulations are conducted in random networks with 50 nodes uniformly deployed in a $1,000m{\times}1,000M$ area where, all nodes have a transmission range of 250m and the average node moving speed varies from 0 to 10m/s. The proposed approach under the ideal antenna with K(>1) directional sectors achieves better results compared with the case of K=1, the omnidirectional antenna model, in terms of the metrics: packet delivery ratio and average number of hops for the routing paths. As further study, a scheme to alleviate the heavy amount of latency accompanied by the rout setup is urgently required.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.92-100
• /
• 2008

Ad-hoc network is a collection of wireless mobile hosts forming a temporary network without the aid of any centralized administration or reliable support services such as wired network and base stations. Recently, Ad-hoc networks are evolving to support multimedia contents according to expansion of ad hoc multi-hop communication system. Wireless ad-hoc network is different from the conventional wired network by frequent changes in network topology, number of routers and resources, there are a number of problems in applying conventional routing protocol to ad-hoc network. The AODV routing protocol is proposed for mobile node in ad-hoc networks. AODV protocol that provides to guarantee QoS for data transmission in ad hoc networks that link break frequently occurs. In this paper, AODV routing protocol based NDIS(Network Driver Interface Specification) is implemented. We design high performance image transmission that can operate with software(AODV) for ad-hoc networks without degradation. and verify operation of AODV routing protocol on the test bed.