• Applied Microscopy
• /
• v.36 no.1
• /
• pp.25-33
• /
• 2006

This study applied a bleaching agent. which is commonly used in the beauty salons, to the hair of normal adult women, collected the hair immediately and 10 days and 20 days from the bleaching, were investigated the degree of degradation of the hair by using scanning and transmission electron microscopes. The surface of hair just after bleaching was observed to be similar to that of normal hair, showing no split or damage of scale. In the hair of 10 days after bleaching, however, the scale came off. From this time, scale on the cuticular layer of hair began to be separated. In 10 days from bleaching, the scale on the cuticular layer was separated from hair and some cytoplasm of cuticular cells was broken into pieces or fell off. The cell remains made the surface coarse and uneven. At this period, damaged scales had a sharp end. In the hair of 20 days after bleaching, scale fell off from the whole surface of the hair and the surface looked rough. On the bleached hair, many vacuoles were formed in the endocuticle of cuticular cells. As a result, deformation caused by the formation of vacuoles in cuticles broke up the cuticular cells.

• Physical Therapy Korea
• /
• v.9 no.4
• /
• pp.53-59
• /
• 2002

본 연구는 컴퓨터 작업시 머리자세가 상부 승모근의 근전도 활성도에 미치는 영향에 대해 알아보기 위해 실시하였다. 대상자는 상지에 근골계질환이 없는 대학생 5명을 대상으로 하였으며, 표면근전도(MP100WS)를 이용하여 근 활성도를 측정하였다. 실험은 10분 동안 머리를 중립자세로 모니터를 보고 컴퓨터 작업을 수행하는 것과 문서걸이(copy holder)를 보기 위해 머리를 $45^{\circ}$ 회전하고 컴퓨터 작업을 하는 두 가지 조건을 $%RVC_{RMS}$를 이용하여 비교 분석하였다. 머리를 중립자세로 했을 때 평균 $%RVC_{RMS}$ 값이 높았으나 머리를 $45^{\circ}$ 회전하여 작업시에는 시간이 지남에 따라 $%RVC_{RMS}$가 지속적으로 증가함을 보여주었다. 따라서 컴퓨터 작업시 문서는 모니터로부터 가까이 하여 머리회전을 최소화시키는 것이 근육의 피로나 부작용을 줄일 수 있을 것이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.1
• /
• pp.221-229
• /
• 2004

In Recent experimental research results of connection method between steel pipe pile and concrete footing are provided based on various experimental observations. It gives a shedding light toward developing better connection method for steel pipe pile at the field application. In this study, the newly developed method is tested for compressive, pull put and combination load including moment with carefully designed monitoring system. The measured data show that new method have at least equivalent or better load resistant capacities compared with those of specified method in Korea Road Design Specification. It is also tried to define and investigate the load transfer mechanism for new method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.80-90
• /
• 2011

The purposes of this study are clarifying the characteristics of women's hair style in the late Joseon Dynasty by inquiring into that hair style and, by extension, having a new understanding of the aesthetic consciousness of women in those times. The typical hair style of married Joseon women was Ungeonmeori and Jjokmeori, with Ungeonmeori being much more popular. Regardless of socioeconomic status, women used a big Gache as long as conditions permitted. Meanwhile, some women who led the trend or followed the national policy did Jjokmeori and wore Jokdoori. The Joseon Dynasty had a strict clothing system. However, giseangs were free from this restriction and they were free at attire. Therefore, they led the fashion trend. Both noble and common women followed the trend, imitating giseangs' attire. Women's hair style was used as a tool to express one's personality in the late Joseon Dynasty when the hierarchy was already weakened. In fact, it seems that women in those times cared more about hair style trend than clothing trend. This means that those women already had such a high quality of aesthetic consciousness that they showed their hair which is the closest to the face to advantage.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.333-341
• /
• 2008

In this paper, a new interpolation model for the head related transfer function (HRTF) was proposed. In the method herein, we assume that the impulse response of the HRTF for each azimuth angle is given by linear interpolation of the time-delayed neighboring impulse responses of HRTFs. The time delay of the HRTF for each azimuth angle is given by sum of the sound wave propagation time from the ears to the sound source, which can be estimated by using azimuth angle, the physical shape of the underlying head and the distance between the head and sound source, and the refinement time yielding the minimum mean square error. Moreover, in the proposed model, the interpolation intervals were not fixed but varied, which were determined by minimizing the total number of HRTFs while the synthesized signals have no perceptual difference from the original signals in terms of sound location. To validate the usefulness of the proposed interpolation model, the proposed model was applied to the several HRTFs that were obtained from one dummy-head and three human heads. We used the HRTFs that have 5 degree azimuth angle resolution at 0 degree elevation (horizontal plane). The experimental results showed that using only $30\sim40%$ of the original HRTFs were sufficient for producing the signals that have no audible differences from the original ones in terms of sound location.

• Proceedings of the Costume Culture Conference
• /
• 2004.04a
• /
• pp.75-77
• /
• 2004

머리형태의 근간이 되는 두개골의 형태는 두개골이 나타내는 선에 따라 인종적 특징을 뚜렷이 나타낼 뿐 아니라 같은 집단 내에서도 개인차가 크며 복잡한 곡면구조를 가지고 있다. 더욱이 머리 형태는 두개부 뿐만 아니라 얼굴부위와 연결되어 매우 세밀하고 복잡한 구조를 지니고 있을 뿐 아니라, 인간의 생명과 직결된 매우 중요한 부위이다. 그러므로 모자와 헬멧을 비롯하여 고글, 안전모, 안경 등 머리 및 얼굴에 착용되는 산업제품의 안전하고 유용한 설계를 위하여 이러한 부위들의 정확한 치수와 형태파악을 필요로 한다. (중략)

• Journal of the Korea Computer Graphics Society
• /
• v.5 no.1
• /
• pp.35-40
• /
• 1999

본 논문에서는 머리카락의 모델링 및 애니메이션을 다룬다. 자연스러운 머리모양의 모델링을 위한 방법을 제시하고 디자인된 머리카락의 애니메이션을 구현한다. 빠른 구현을 위하여 역동적인 충돌감지법을 제안하고 머리카락을 군으로 나누어서 다룬다.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.109-111
• /
• 2006

본 논문은 보행자 머리 상해치 예측을 통해 보행자 보호 법규의 만족여부를 판단하는 시스템을 구축 하는데 있다. 차량의 FE DATA와 더미 DATA를 입력하고, MADYMO solver를 이용하여 해석을 수행한다. 이를 통해 나온 결과 HIC(머리상해치)와 보행자 보호 법규에서 제시하는 HIC(머리상해치)와 비교를 통해 만족여부를 판단한다. 강화되는 보행자 보호 법규를 만족시키기 위해 차량시스템을 개선을 유도 하고 이를 통해 차량 대 보행자 사고 시 보행자의 생명을 구하는데 그 궁극적인 목적이 있다.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.319-325
• /
• 2022

The Study In order to obtain a sharpness Image from Skull PA axial projection (Haas) in a head axial X-ray Examination, this study changed the posture angle using Skull Phantom and evaluated the image subjectively to 5 radiologists who worked in the Department of Imaging at University Hospital. In the prone position, the head was lowered 4 cm from the back of the head, entered 25° toward the head, and the image evaluation score was high with 20 points, such as the back bone, dorsum sellae projected in the large hole, and posterior clinoid process. In addition, the score significance was verified, and the Cronbach Alpha value was evaluated to have good reliability of 0.789. As a result of calculating the signal-to-noise ratio (SNR) by setting the region of interest (ROI) of the image, it was the highest at 5.957 for 25° incident at the back of the head and 6.430 for 30° incident at the back of the head. As a result of the study, in order to obtain a sharp image of the back of the head bone, dorsum sellae, and posterior clinoid process when shooting in the axial direction after the head, it is filmed by tilting 25° toward the head from 4 cm below the back of the head. In order to obtain a sharp image of rock pyramid symmetry, petrous ridge, sagittal suture, and lambdoid suture, it is thought that it will be helpful for clinical use if you shoot it 8cm down from the back of the head and tilt it 30° toward the head.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.94-103
• /
• 2001

The goal of using numerical methods in this study is two-fold: to replicate a set of measured, individualized HRTFs by a computer simulation, and also to visualise the resultant sound field around the head. Two methods can be wed: the Boundary Element Method (BEM) and the Infinite-Finite Element Method (IFEM). This paper presents the results of a preliminary study carried out on a KEMAR dummy-head, the geometry of which was captured with a high accuracy 3-D laser scanner and digitiser. The scanned computer model was converted to a few valid BEM and IFEM meshes with different polygon resolutions, enabling us to optimise the simulation for different frequency ranges. The results show a good agreement between simulations and measurements of the sound pressure at the blocked ear-canal of the dummy-head. The principle of reciprocity provides an effect method to simulate HRTF database. The BEM was also used to investigate the total sound field around the head, providing a tool to visualise the sound field for different arrangements of virtual acoustic imaging systems.