• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.27-33
• /
• 2023

In this study, it was analyzed with the dyeing pattern of Diospyros kaki Thunb (persimmon) and was tried to numerically evaluate how the dyeing pattern in silk fabrics and cells was changed by different mordants. When the dyed silk fabrics were sufficiently dried, the silk fabrics were found to have a pale yellow color. Interestingly, iron II sulfate mordant changed the color change the most, silk fabrics were dyed with a color close to brown or dark purple. For numerical analysis, 19% and 62.5% color changes could be induced by sodium tartrate plus citric acid and copper acetate, respectively. Iron II sulfate induced the greatest difference than that of untreated mordants at 88%. About 5% and 10% of Chinese hamster ovary (CHO) cells were stained by sodium tartrate plus citric acid and copper acetate, respectively. The staining effect induced by iron II sulfate was about 2.4 times higher than the staining effect by sodium tartrate plus citric acid. In previous studies, staining results have been visually confirmed. However, this results not only visually confirmed the dyeing, but also quantified the color change. In particular, if numerical results are continuously integrated into big data, any researcher will be able to easily obtain similar results even if the method, time, volume, etc. are changed. In addition, the numerical data of this study is considered to be an important basis for building a database for IoT construction and computer analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.90-98
• /
• 2006

The purpose of this study was to estimate natural dyeing properties of Korean traditional paper (Hanji). Korean traditional paper, which made from bleached bast fiber pulp of Broussonetia kazinoki was used as base paper. As dyestuffs, hot water extractives of Phellodendron amurense bark, Rosa multiflora leaf and stalk, and Rubia cordifolia root and methanol extractives of Lithospermum erytrorhizon root were used. $Al_2(SO_4)_3$ and $Fe(OH)(CH_3COO)_2$ 0.5% solution were used as mordant. Soybean juice (10%), chitosan (0.1%), and skim milk (2%) solutions were used as auxiliary dyeing agents. Accelerated aging treatments of natural dyed Korean traditional papers were undergone at following conditions: exposure temperature, $80^{\circ}C$ relative humidity, 60%; wavelength, 340 nm; UV irradiance, $0.67W/m^2/nm$ exposure time, 24, 48, and 72 hours. Colors, color difference, and color fastness were examined for estimation of natural dyeing characteristics. The auxiliary dyeing agents treated Korean traditional papers were more superior the dyeing effectiveness about dyestuffs than untreated Korean traditional papers. The dyeing effectiveness of soybean juice treated Korean traditional paper was superior to the others. The color fastness of Korean traditional paper, which was dyed with Rubia cordifolia root extractives, was most inferior to the others.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.75-85
• /
• 2004

The natural dyes from Gardenia jasminoides, Carthamus tinctorius L., Rhus javanica, Lithospermum erythrorhizon, Caesalpinia sappan L., and Castanea crenata were extracted under different pH in distilled water, As the pH in distilled water went from acid to alkali, the much deeper colors in the same color tone were generated from the individual plant species. Before dyeing, wood species were treated by different mordants including AI, Cu, Cr and Fe for color-fixing between wood and the natural dyes. Each mordant could develop independent color on the surface of the woods. The wood species dyed by the natural dyes created deep-tone colors according to higher pH and temperature of the dyeing solution, leading to deeper penetration of the dyes into the wood tissues. Finally through the computer modelling of natural-dyed wood furniture, it was confirmed that the colored furniture can adequately be compatible with the current interior spaces of diverse colors.

• Journal of Convergence for Information Technology
• /
• v.11 no.8
• /
• pp.201-206
• /
• 2021

The aim of this study was to examined the dermatoxicity of ferrous chloride (FeCl2) and the antioxidative effect of Stachys japonica Miq (SJ) extract on FeCl2-induced cytotoxicity. For this study, superoxide anion-radical (SAR)-scavenging and superoxide dismutase (SOD)-like abilities with cell viability were done. FeCl2 showed a significant decrease of cell viability in dose-dependent manner, and it was mid-toxic. The caffeic acid showed a significant increase of cell viability against FeCl2-induced cytotoxicity. In the protective effect of SJ extract on FeCl2-induced cytotoxicity, it showed SAR-scavenging and SOD-like abilities with a significant increase of cell viability. From these results, the cytotoxicity of FeCl2 is correlated with oxidative stress, and SJ extract effectively protected the cytotoxicity of FeCl2 by antioxidative effect. Conclusively, the natural resources like SJ extract may be a useful fundamental materials for the development of an alternative antioxidant.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.216-217
• /
• 2001

인류문명과 같이 시작한 천연염색은 생산량의 한정 염색물의 견뢰도 불량, 염색시 얼룩생성의 용이 등의 문제점으로 인해 화학염료가 발명되면서 점차 쇠퇴되었다. 그러나 천연염료로 염색한 염색물은 합성염료로 염색한 염색물에 비하여 그 색상이 자여스럽고 우아하며, 염색재료 대부분 한약재인 것이 많아 약리 효과를 갖는것이 많고, 최근 대두되고 있는 공해문제 해소에도 많은 장점을 가지고 있어 이에 대한관심이 점차 높아지고 있다. 일반적으로 동물성 섬유(견, 모)는 단백질 섬유로서 매여제를 쓰지 않고도 염색이 잘되는 편이지만, 식물성 섬유인 면, 마 등은 섬유소이므로 색소의 흡착이 불량하여 염색보조제로 전처리 한 다음, 주매염제를 처리해야 좋은 결과를 얻을 수 있다ㅣ. 식물성 섬유의 일종인 인피섬유로 이루어진 한지의 천연염색 효과 향상을 위해 염색 보조제로 전처리 한 것과 무처리 한지의 염색특성을 구명하기 위해 본 실험을 실시하였다.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.417-423
• /
• 2005

In order to investigate effects of dyeing conditions on the dyeing characteristics in silk during natural dyeing using indigo plants , various dyeing conditions including the temperature of dyeing solution, dyeing period, the concentration and pH of dyeing solution and mordants were treated. As the temperature of dyeing solution decreases low, the color of silk surface showed lower b value. The color of silk surface showed G line when the dyeing solution was $-5^{\circ}C$ and room temperature and GY line at more than $40^{\circ}C$. Coloring degree increased high as the temperature increases. Dyeing period showed no effect on the surface color, but as dyeing period was longer the coloring degree increased. When the concentration of dyeing solution was $1\~4\%$, the silk was colored to BG line and $5\%$ to B line. The coloring degree increased as the concentration of dyeing solution more increased. The pH of dyeing solution sensitively affected coloring of silk. The pH lower than 7 showed G line, pH 8 showed GY line and pH 9 showed YR line. Coloring degree decreased as pH was more increases. Surface color of silk was different according to the kinds of natural mordants and coloring degree was increased by the natural mordants.

• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.648-659
• /
• 2012

This research categorizes fundamental data needed to develop eco-friendly fabrics treated with bamboo leaf & pine leaf extracts. The effect of mordant on those fabrics was analyzed through the measurement of mechanical properties and the estimation of primary hand values for cotton and silk fabrics dyed with bamboo leaf and pine leaf extracts that were later treated with various mordants. When cotton was dyed with bamboo leaves and pine leaves extracts, EM, WT, 2HB, 2HG, 2HG5, LC, T, and W increased however, RT, SMD, and RC decreased compared to raw cotton fabric. The B, G, and MIU increased after mordant treatment to the dyed cotton and resulted in a stiffer and rougher cotton's hand. EM, WT, RT, MIU, WC, T, and W increased (in terms of silk); however, LT, B, 2HB, G, 2HG, 2HG5, MMD, SMD, and LC decreased compared to raw silk fabric. Similar to the dyed cotton, mordant treatment increased the MIU and LC of dyed silk subsequently, the hand became stiffer and rougher. A greater tannin adsorption results in an increased mechanical property and the primary hand value. For both fabrics, mordant treatment made its smoothness drop. However, the scale of drop for cotton was significant, while the scale of the drop for silk was minor. In terms of type of mordant, femordant and natural-mordant treatment influenced the tensile, shear, surface properties of fabrics, and primary hand values more than Cu-mordant and synthetic-mordant in addition, this increased the stiffness, hardness, and roughness of fabrics.

• Journal of Fashion Business
• /
• v.11 no.1
• /
• pp.136-148
• /
• 2007

African marigold is a common plant easily available in many flower beds. It has been reported as a practical and prospective resource of dyes since the dyes can be extracted from their bodies as well as petals. In this research, cotton and ramie fabrics which are made from natural cellulose were dyed using the extract of the African Marigold which is a variety of marigold. Dyeing tests were carried out under different pH of the dye solution and mordants. Dyeability was evaluated by examining and measuring surface color, K/S value, and the changes in the maximum absorption wavelength. The probability of improving dyeability was investigated by pre-mordanting with pre-treated chitosan. For the dyeing with marigold extract, the color tone did not differ by pre-mordanting and non-mordanting. Reaction with post-mordanting was excellent, which was colored in various yellow series. The best dyeability was achieved in dye solution of pH 6.5-7.0 which is not conditioned. The largest K/S value and color difference were obtained in tin mordanting. The dye uptake was greatly increased in chitosan pre-treated mordanting compared with the post-mordanting without chitosan pre-treatment. Due to its high heat resistance, African Marigold extract is easy for dye extraction and dyeing, and its dyeability is excellent for natural cellulose fibers. Also, colorfastness was proved to be practically usable.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.2
• /
• pp.175-179
• /
• 1996

The sappan wood dyeing conditions and mordanting methods suitable for ramie as well as silk were investigated. The HVC values of dyed silk ramie fabrics were varied by the amount of sappan wood in the dyeing bath, while the optimum weight of sappan wood for the extraction of dye was around 15g/l. The K/S value of dyed silk fabric showed no significant difference in the pH range of 3.5 to 6.5. However, the K/S values of dyed ramie fabric was increased proportion to the pH value of dye bath. The K/S value of dyed silk and ramie fabrics were most increased at the highest dyeing temperature in the range of 30 to 9$0^{\circ}C$. By various mordantings, the HVC values of dyed silk and ramie fabrics were differentiated and it's color fastness could be improved.

• The Research Journal of the Costume Culture
• /
• v.13 no.3 s.56
• /
• pp.380-390
• /
• 2005

The effect of high purity chitosan was studied on its application to the natural dyeing using Rhusjara ica. In the dyeing experiment, examinations were introduced on the difference between the chitosan treated fabrics and chitosan untreated fabrics, and on the difference according to the type of mordanting agents and the mordanting methods. Dyeing was carried out for the chitosan treated and untreated fabrics under the conditions of non-mordanting and Al, Sn, Fe mordanting. As a result, we found that, in the case of cotton, chitosan untreated fabrics were not dyed enough, and the dyeing effect was not developed even though the mordanting was introduced. However, the chitosan treated fabrics developed excellent dyeing result even in the non-mordanting case. Through the results of cotton fabric dyeing, it was presumed that the dyeing affinity of the chitosan toward the Rhusjara ica, which prefer specific dyestuff (mainly black color), is selectively high. In the case of nylon, the dyeing effect is not developed easily under all conditions regardless of the chitosan treatment or the mordant treatment. It was inferred that a certain portion of the Rhusjara ica dyestuff made direct bonding with the functional elements in the nylon molecules without the help of the mordant. Through the results of nylon fabrics, it was presumed that some functional elements of the nylon molecules had selective affinity toward the specific colorant (mainly yellow color) of the Rhusjara ica.