• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.4
• /
• pp.279-290
• /
• 2004

The differential quadrature method (DQM) for a system of coupled differential equations governing the elastic stability of thin-walled curved members is presented, and is applied to computation of the eigenvalues of out-of-plane buckling of curved beams subjected to uniformly distributed radial loads including a warping contribution. Critical loads with warping, which were found to be significant, are calculated for a single-span wide-flange beam with various end conditions, opening angles, and stiffness parameters. The results are compared with the exact methods available. New results are given for the case of both ends clamped and clamped-simply supported ends without comparison since no data are available The differential quadrature method gives good accuracy and stability compared with previous theoretical results.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.21-28
• /
• 2011

Several theoretical soil nonlinear models to predict damping ratio, which is one of the typical dynamic properties of soils, it is impractical to predict damping ratio. The resonant column and torsional shear test(RC-TS) is used to represent the dynamic behavior of soils from intermediate to medium shear strains. A limitation of RC-TS is measure precise shear strain in large strains and the modified equivalent radius($R_{eq}$) was obtained using both modified hyperbolic model and Ramberg-Osgood model. Bonneville clays were tested using RC-TS test to obtain rotation and torque. The measured rotation and torque were then compared with calculated rotation and torque using curve-fitting method. Then, the nonlinear soil model parameters were obtained and the equivalent radius was calculated using the model parameters.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.87-95
• /
• 2000

The two eigenvalues (elastic critical load and natural frequency of lateral vibration) of sinusoidally tapered bats with simply supported ends were determined by the finite element method. For the convenience of structural engineers who are engaged in the structural design or vibration analysis of tapered beam-columns, eigenvalue coefficients were expressed by simple algebraic equations. The validity of each algebraic equation was confirmed by the value of unity for each correlation coefficient. The influence of axial thrust on the lateral vibration frequency was also investigated. For this purpose, the axial thrust was increased successively and the corresponding frequency was calculated. The approximate linear relationship between the axial thrust and the square of the frequency was confirmed lot each of the tapered members.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.237-245
• /
• 2008

We developed a computational method on coupled dynamics of tracked vehicle on seafloor and long flexible pipe. The tracked vehicle is modeled as rigid-body vehicle, and the linked flexible pipe is discretized according to a lumped-parameter model. The equations of motion of the rigid-body vehicle on the soft seafloor are combined with the governing equations of flexible pipe dynamics. Four Euler parameters method is used to express the orientations of the vehicle and the flexible pipe. In order to solve the nonlinear coupled dynamics of vehicle and flexible pipe an incremental-iterative formulation is implemented. For the time-domain integration $Newmark-\beta$ method is adopted. The total Jacobean matrix has been derived based on the incremental-iterative formulation. The interactions between the dynamics of flexible pipe and the mobility of the tracked vehicle on soft seafloor are investigated through numerical simulations in time domain.

• The Journal of Engineering Geology
• /
• v.11 no.1
• /
• pp.63-79
• /
• 2001

This study is aimed for estimating hydraulic parameters using the Cooper-Bredehoeft-Papadopulos, the Hvorslev, and the Bouwer & Rice methods at nineteen test holes in Me. Geumjeong area composed of Bulguksa granites, and for characterizing hydraulic properties at the test holes with relatioll to drill core data. The relation among hydraulic Dammeters obtained by the three methods is also considered. The study area is divided into four sub-areas to consider the hydraulic characteristics. The difference of hydraulic conductivity estimates between the injection and the withdrawal slug test may be due to penncable fracture distlibutions around the test hole and/or the disturbance of fine mateIials in the fractures induced by the pressure variation due to different mechanisms of test initiation. The hydraulic conductivity estimates detennined by the Cooper-Bredehoeft-Papadopulos, the Hvorslev and the Bouwer & Rice methods ranges from 10$^{-8}$ to lO$^{-5}$m/sec, and the ranges of average values are from 10$^{-7}$ to 10$^{-6}$m/sec. Also, the transmissivity ranges from 10$^{-7}$ to 10$^{-5}$$m^2$/sec. Comparing average hydraulic conductivity by the Cooper-Bredehoeft-Papadopulos, the Hvorslev and the Bouwer & Rice methods, by the Hvorslev method has the highest values, then the Bouwer & Rice method, and the Cooper-Bredehoeft-Papadopulos method has the lowest.

• Journal of Korea Water Resources Association
• /
• v.40 no.3
• /
• pp.205-214
• /
• 2007

The objective of this study is to generate the regional scale runoff scenarios by using IPCC SRES A2 climate change scenario for analyzing the spatial variation of water resources in Korea. The PRMS model was adopted to simulate long-term stream discharge. To estimate the PRMS model parameters on each sub-basin, the streamflow data at 6 dam sites and Rosenbrock's scheme are used for model parameter calibration and those parameters are translated to ungauged catchments by regionalization method. The other 3 dam sites are selected for the verification of the adequateness of regionalized model parameters in ungagued catchments. The statistical results show that the simulated flows by using regionalized parameters well agree with observed ones. The generated runoff scenarios by climate change are compared with observed data on 4 dam sites for the reference period. The consequences show that the selection of climate station for generating climate scenario affects the reliability of climate scenario at sub-basin. The comparison results of the stream flows between the 30-year baseline period (1971-2000) and future 90-year (2001-2030, 2031-2060, 2061-2090) show that the long-term mean annual runoff in the Han River has increasing trend, while the Nakdong, the Gum, the Youngsan and the Sumjin Rivers have decreasing trend.

• Journal of Korea Water Resources Association
• /
• v.40 no.2 s.175
• /
• pp.147-158
• /
• 2007

This study attempted to determine a suitable hydrologic model for assessing the impact of climate change on water resources, and to assess the accuracy of streamflow scenarios simulated by the selected hydrologic model using the meteorological scenarios of the Seoul National University Regional Climate Model(SNURCM). Comparison of four water balance models and two daily conceptual rainfall-runoff models for the simulation capability of the Daecheong Dam inflow indicated that the abcd model performs the best among the tested water balance models and performs as well as SSARR that is popular as a daily rainfall-runoff model in Korea. Parameters of the abcd model were then estimated for 12 ungauged subbasins of the Geum River by the regionalization method. The model parameters were first calibrated at nine multi-purpose dams and were then regionalized using catchment characteristics for another four multi-purpose dams, which were assumed to be ungauged sites. The model efficiency(ME) coefficients of the simulated inflows for these four dams were at least 87%. The MEs of the hindcasted meteorological rainfall scenarios of the 12 subbasins of the Geum River were more than 60%. Moreover, the ME of the Daecheong Dam inflow simulated by the abcd model using the SNURCM rainfall scenarios was more than 80%. Therefore, this research concluded that the abcd model coupled with the SNU-RCM meteorological scenarios can be used for impact assessment studies of climate change on water resources.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.265-265
• /
• 2016

호우가 홍수에 미치는 영향의 분석은 수문현상을 이해하고 수공구조물을 설계하는데 반드시 필요한 절차이다. 호우가 홍수에 미치는 영향을 분석하기 위해서 독립된 소유역부터 비독립된 대유역까지 홍수량을 계산하고 그 상관성을 이해해야 하지만 상류쪽의 소유역의 경우 관측자료의 부재가 빈번하여 이러한 전반적인 분석이 쉽지 않다. 그리고 소유역과 대유역의 홍수특성을 연관지어 분석하기 위해서는 비교가능한 홍수특성을 추출해야 하며 이러한 일관된 잣대를 사용한 홍수분석은 중요하다. 본 연구에서는 소유역의 자료부재를 보완하기 위해 자료공간확장 방법을 제안하고 이를 통하여 안동댐 유역내 총 50개 지점의 홍수 시계열자료를 생성하였다. 자료공간확장 방법으로써, 안동댐유역의 1989년부터 2009년까지의 자료의 질이 좋은 20개의 사상을 추출하였고 안동댐유역 내에 위치한 안동댐, 도산, 소천의 수위관측지점의 관측유량자료에 대해 분포형 모형인 GRM 모형의 매개변수를 시행착오법으로 동시에 보정하여 한 개셋의 최적 매개변수를 추정하였다. 이때 모의결과를 평가하기 위하여 Nash-Sutcliffe (NS) 계수를 사용하였으며 20갯 사상의 세군데 관측수위지점에 대해서 모의결과가 전반적으로 0.5 NS 계수 이상으로써 만족할 만한 결과를 얻었다. 이 추정된 매개변수는 47개의 추가적인 관심지점의 유출모의에 사용되었으며 이렇게 모의된 유출시계열 자료는 관측시계열 자료로 가정하여 사용하였다. 이렇게 공간확장되어 생성된 시계열 자료는 이동평균방법을 사용하여 홍수강도-지속시간 곡선으로 변환되었고 50개 유역의 평균강우량 시계열 자료 또한 같은 밥법을 사용하여 강우강도-지속시간 곡선으로 변환되었다. 50개 유역의 비교가능한 일관된 홍수특성을 추출하기 위해 비유량법의 유출계수를 계산하였다. 유출계수를 계산하기 위해 유역별 도달시간을 계산하였으며 이 도달시간에 해당하는 강우강도를 추출하였다. 그리고 유역별 첨두 홍수강도를 유역별 도달시간에 해당하는 강우강도로 나눠줌으로써 유역별 유출계수를 계산하였고 이 유출계수를 유역면적에 대해 도시함으로써 그 경향을 조사하였다. 조사 결과 유역면적이 $100km^2$ 이상으로써 상류에서 하류방향으로 유역이 중첩되면서 증가하는 비독립적인 유역들의 경우 유역면적이 증가함에 따라 유출계수가 작아지거나 커지는 어떠한 경향을 보였다. 하지만 유역면적이 $100km^2$ 이하로써 독립적인 소유역의 경우 유역면적이 증가함에 따라 유출계수는 무작위로 분포되었다. 이것은 비독립적인 유역의 경우에는 호우가 홍수에 어떠한 일관된 영향을 미치나 각각 독립된 소유역의 경우에는 일관된 영향을 미치지 않음으로써 지역화방법에 의한 독립된 인근 미계측유역의 유출추정은 그 신뢰성이 높지 않다는 것을 의미한다.

• Journal of Environmental Impact Assessment
• /
• v.23 no.6
• /
• pp.432-444
• /
• 2014

When the water quality modelling is done with a manual calibration, it is possible that the researcher's opinion may affect the objectivity of the research. Hence, the role of the automatic calibration is highly important. This research applies a technique to automatically calibrate the water quality parameters by implementing an optimization method. This involves estimating the optimum water quality parameters targeting influential parameters towards the lake's BOD, DO, Phosphorus, Nitrogen and Phytoplankton. To accurately calculate the water temperature and hydraulic characteristics of a deep, stratifying lake, EFDC, a 3-dimensional hydraulic model which can be linked to the WASP7 was applied. With EFDC, the segment of the lake is formed and utilized as an input data of the WASP7. For the calibration of the water quality parameters of the WASP7, an influence coefficient algorithm and a genetic algorithm was applied. Of the five water quality variables for calibration, the normalized residuals of the observed and calculated values of DO, TN, CBOD were relatively small and the three water quality variables were calibrated properly. Yet the accuracy of the calibration of TP and Chl-a was relatively low.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.829-833
• /
• 2004

도시지역의 홍수량 산정은 대부분 유출량의 관측기록이 없어서 홍수빈도해석은 물론 강우-유출 모형의 매개변수 검증도 불가하다. 따라서 확률강우량을 Huff 법 등으로 시간분포 시켜 강우-유출모형에 의해 산정된 유출량을 검정절차 없이 설계홍수량으로 채택하고 있다. 본 연구에서는 1961년부터 2002년간의 서울 관측소의 시우량 자료를 각각 Huff 법에 의하여 시간분포 시킨후 강우-유출모형에 의하여 유출수문곡선을 모의하였으며, 모의된 42개년의 첨두 홍수량을 빈도 해석하여 빈도별 확률홍수량을 산정하였다. 유출량의 빈도해석으로 산정된 확률홍수량은 년 최대 강우량을 빈도해석 하여 강우-유출모형에 의하여 모의된 유출량과 비교, 분석하는 방법으로 국내 실무에서 적용하는 홍수량 산정법의 간접 검증법을 제시하였다. 적용결과 대상유역에서의 확률강우량에 의한 유출량은 모의 유출량을 유출 빈도해석 하여 결정된 확률유출량보다 전반적으로 크게 산정되어 서로 상이한 결과가 도출되었다.