• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.3
• /
• pp.125-131
• /
• 1998

The paper deals with the application of Boundary-Fitted Coordinate System (BFCS) to the two wave models of parabolic and hyperbolic types developed on a rectangular grid system. Since the BFCS conforms the boundaries of the region in such wary that boundary conditions or calculation process can be accurately represented, improvement in predicting the wave fields can be achieved. The numerical results show a good agreement with the analytical results for either waves propagating or reflecting along a circular channel of constant depth. Simulation of reflecting waves in a parabolic wave model is accomplished by the backward calculation as if waves approached at the cross wall take a turn in the opposite direction and propagate against a channel.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1481-1485
• /
• 2010

강원지역은 산지가 89%를 차지하고 있어 도로의 대부분이 하천을 끼고 발달되어 있어서 집중호우 시 하천 만곡 수충부에서 급격한 홍수위 상승과 하상세굴이 발생되고 산지의 수로나 계곡 등에서 토석류가 발생되기 때문에 극심한 도로피해가 빈발하고 있다. 산지하천은 지형 및 지질적인 요인으로 경사가 급한 만곡 수충부가 많이 발달되어 있기 때문에 홍수시 유속이 매우 빠르고 만곡 수충부에서 수위상승과 횡방향 수위변동이 심하다. 따라서 산지유역의 하천과 도로의 방재설계를 위해 평창 속사천 시험유역의 운영을 통하여 신뢰성 있는 고품질의 산간유역 수문자료를 지속적으로 확보하고자 한다. 강우-유출구조 규명을 위한 강우관측소와 수위관측소 등의 계측시스템을 설치와 실시간 수문관측 자료의 전송 및 정기적인 현장 방문으로 수집된 수리수문자료에 대해 DB를 구축을 실시하였다. 또한 홍수시 하천으로 유입되는 토석류의 조도계수 산정을 통해 하천유역내의 수리 구조물의 설계 및 유지관리, 하천개수 및 하도의 안정 등을 평가할 수 있을 것이다. 하천계획에 필요한 유사량을 측정하여 유역의 수문.수리특성에 대한 보다 정확한 규명과 관측된 자료를 이용한 장/단기 수문순환 및 수리모형의 개발을 위한 검정 및 검증자료의 제공할 것으로 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.480-480
• /
• 2023

본 연구에서는 섬진강 하류에서 2차원 흐름 모형인 Nays2DH 활용하여 섬진강댐 하류, 송정 구간의 식생밀도를 고려한 부등류 계산을 통해 하도의 수위 및 유속을 예측 모의하는 방법론을 제시하고 모의결과를 분석하였다. 현장조사를 실시하여 하도의 식생밀도를 산정하였으며. 식생밀도는 섬진강댐 하류 1.15 m-1, 송정 0.35 m-1로 조사되었다. 모의결과, 섬진강댐 하류에서 원심력에 의해 만곡부 외측에서 수심이 가장 깊게 나타났으며(최대 7.48 m), 최대유속도 동일지점에서 5.58 m/s로 형성되었고 하안침식으로 인한 하도변화 예측결과, 유속이 빠른 만곡부 외측에서 세굴되었으며, 내측에서는 퇴적되었고 만곡부가 끝난 지점부터 중앙사주가 발달하며 흐름이 하도 좌안으로 집중하여 세굴이 진행되었다. 송정구간에서 저수로 폭이 좁아지는No.40+200 지점에서 수심이 가장 깊으며(15.8 m), 유속은 하폭이 좁고 경사가 급해지는 No.39+800 지점에서 최대 7.97 m/s 로 나타났다. 하안침식으로 인한 하도변화 예측결과, 하폭이 넓어지는 No.40+800에서 유속이 감소하여 사주가 발달하였다. 본 연구에서는 섬진강 하류의 실제 식생밀도를 반영하여 수치모의를 하였기 때문에 흐름과 식생관리에 따른 실무적 대책방안 마련에 도움이 될 것으로 판단되며, 본 연구에서 활용한 분석방법과 결과들은 섬진강 유역의 하천관리 방안을 구축하기 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• Journal of Korea Water Resources Association
• /
• v.37 no.7
• /
• pp.527-540
• /
• 2004

In order to investigate characteristics of the primary flow and the secondary currents in the meandering channel, laboratory experiments were conducted in the meandering channel made up of alterative bends haying 120。 arc angle. Experiments were performed in two types of cross-sections, a rectangular cross-section and a curved cross-section which was made to adopt a beta probability function. Three-dimensional velocity fields were measured using a micro-ADV. As the result of experiments, in case of the rectangular cross-section, the primary flow occurred taking the shortest course, which is similar to the result of previous researches. In case of the curved cross-section, the primary flow was expected to occur along the thalweg. but it occurred almost along the shortest way. This is considered due to effects of bottom roughness and sinuosity Not only a main cell but also a secondary cell of secondary currents were clearly shown by mean of the stream function. The secondary current intensity has the maximum value near the apex of the second bend for cases of both rectangular and curved cross-sections. However, the value of the secondary current intensity for the curved section is slightly larger than that for the rectangular cross-section. Also, in case of the rectangular cross-section, the higher the ratio of width to depth is, the larger the secondary current intensity is.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2009

Rapid visualization of flood area of downstream according to the dam effluent in flood season is very important in dam management works. Overlay zone of river bight should be removed to represent flood area efficiently based on flood stage which was modeled in river channels. This study applied drainage enforcement algorithm to visualize flood area considering river bight by coupling Coordinate Operation System for Flood control In Multi-reservoir (COSFIM) and Flood Wave routing model (FLDWAV). The drainage enforcement algorithm is a kind of interpolation which gives to advantage into hydrological process studies by removing spurious sinks of terrain in automatic drainage algorithm. This study presented mapping technique of flood area layer considering river bight in Namgang-Dam downstream, and developed system based on Arcobject component to execute this process automatically. Automatic extraction system of flood area layer could save time-consuming efficiently in flood inundation visualization work which was propelled based on large volume data. Also, flood area layer by coupling with IKONOS satellite image presented real information in flood disaster works.

• The korean journal of orthodontics
• /
• v.38 no.1
• /
• pp.52-59
• /
• 2008

Objective: This study analyzed the morphologic changes of the fourth cervical vertebra body to determine the skeletal age of orthodontic patients during growth. Methods: Eighty-one female patients aged from 11 to 14 who had cephalograms taken on the same day were examined. The subjects were divided into three groups depending on the depth of the concavity of the lower border of the fourth cervical vertebra (Group A: less than 1.05 mm, Group B: 1.05 - 2.07 mm, Group C: greater than 2.07 mm). Menarcheal timing, SMI stage, length, width and ratio of length and width of the fourth cervical vertebra body were analyzed and the following results were obtained. Results: The average SMI stage of group A, B and C were $5.67{\pm}2.57,\;8.73{\pm}2.41,\;and\;10.00{\pm}1.47$, respectively. Length, width, ratio of length and width, and SMI stage were greater in group B than group A and in group C than group B. Mean menarcheal timing was $11.64{\pm}0.92$ years. Concavity depth, length, width, ratio of length and width showed a significant positive correlation with SMI stage, especially with the concavity depth. Conclusion: The results of this study propose a simple method for determining the timing of orthopedic treatment by measuring the concavity depth of the fourth cervical vertebra on the cephalogram.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.2
• /
• pp.141-149
• /
• 2019

Purpose: To compare the results of two different instruments made of stainless steel and titanium alloy for correction of single thoracic adolescent idiopathic scoliosis (AIS) using pedicle screw instrumentation. Materials and Methods: A total of 141 patients with single thoracic AIS treated with pedicle screw instrumentation and selective thoracic fusion were retrospectively reviewed after a follow-up of 2 years. The patients had a main thoracic curve of 40° to 75° and were divided into two groups based on instrument materials; S group (stainless steel, n=90) and T group (titanium alloy, n=51). The diameter of the stainless steel rod used was 7.0 mm while that of the titanium alloy rod was 6.35 mm or 6.0 mm. Standing long-cassette radiographic measurements including various coronal and sagittal parameters for the preoperative, early postoperative and 2-year postoperative followup were analyzed. There were no significant differences in the preoperative curve characteristics between the two groups. Results: In the S group, the preoperative main thoracic curve of 51.3°±8.4° was improved to 19.0°±7.6° (63.1% correction) and the lumbar curve of 32.3°±8.4° spontaneously decreased to 12.7°±8.2° (62.9% correction) at 2 years postoperatively. In the T group, the preoperative main thoracic curve of 49.5°±8.4° and the lumbar curve of 30.3°±8.9° was improved to 18.8°±7.4° (62.2% correction) and 11.3°±5.4° (63.3% correction), respectively. The corrections of coronal curves were not statistically different between the two groups (p>0.05). The thoracic kyphosis was changed from 16.8°±8.5° to 24.3°±6.1° in the S group and from 19.6°±11.2° to 26.6°±8.5° in the T group. There were no significant differences in the changes of sagittal curves, coronal and sagittal balances at the 2-year follow-up and the number of fused segments and used screws between the two groups (p>0.05). Conclusion: When conducting surgery for single thoracic AIS using pedicles screw instrumentation, two different instruments made of stainless steel and titanium alloy showed similar corrections for coronal and sagittal curves.

• 대한치과보철학회:학술대회논문집
• /
• 1997.11a
• /
• pp.60-60
• /
• 1997

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2005.05a
• /
• pp.106-108
• /
• 2005

• Water for future
• /
• v.10 no.2
• /
• pp.61-65
• /
• 1977