• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.7
• /
• pp.619-626
• /
• 2007

The analysis of the frictional energy of the rubber block with contact to the surface is necessary to study the wear for rubber. It is important to define the relationship of the frictional energy and wear, as the most theory of the wear of rubber product is based on the frictional energy of rubber block. To predict the life of the rubber block, the most of research has been focused on the use of the finite element analysis or the actual experiments which need the many time and expensive costs.Therefore, this research is achieved the successful results of the analysis to the frictional energy by analytic method. This frictional energy is function of the material properties, the shape of block, the vertical and horizontal load and the block moving speed. The analytical results are compared with the test results of this paper which can be used for the analysis of the friction behavior for the wear estimation of the rubber products.

• Science of Emotion and Sensibility
• /
• v.21 no.3
• /
• pp.141-150
• /
• 2018

The purpose of this study is to investigate three-dimensional embroidery techniques for creating conductive fabric materials. Such techniques can increase the efficiency of energy harvesting by increasing the fabric's area during rubbing and brushing. We also investigate the fabric structure of the triboelectric energy harvesting type. Two experiments were conducted for this purpose. In Experiment I, the three-dimensional embroidery technique(satin technique, file technique) and the conductive fabric material(copper-based MPF, nickel-based MPF) were selected as the main variables affecting the efficiency of triboelectric energy harvesting from the human body. Four samples were fabricated according to a combination of two variables. In Experiment II, the harvesters fabricated by the three-dimensional embroidery method showing the highest efficiency were subjected to brushing processes and the voltages generated after processing were analyzed. As a result, in both conductive fabric materials, the pile embroidery fabric structure showed a higher efficiency than the satin structure. These results show the triboelectric energy harvesting principle, which is proportional to the charge density and the generated voltage. It can be seen that the structure of pile embroidery fabric with a large friction area is advantageous for increasing efficiency compared to satin embroidery-fabric structure with a relatively small friction area. Moreover, the energy harvesting efficiency after brushing was higher than that before processing due to the increased friction area, and it was found that the brushing method is advantageous for increasing the triboelectric-energy harvest.

• 기계와재료
• /
• v.10 no.4 s.38
• /
• pp.97-110
• /
• 1998

플라이휠 에너지 저장시스템은 입력되는 잉여전기에너지를 플라이휠의 관성을 이용, 회전 운동에너지로 변환하여 저장하고 필요시 전기에너지로 순시에 출력하는 장치로 배터리와 같은 화학적 에너지 저장장치에 대비되는 기계적 에너지 저장방식 (Electro-mechanical Battery)이다. 플라이휠 시스템은 많은 에너지를 단시간에 저장하고 이를 순발적으로 활용할 수 있는 고효율, 장수명, 무공해의 청정 에너지저장/재생장치로 선진국에서는 무공해 교통수단(전기자동차 등)의 차세대 보조 동력원을 비롯한 각종 민수용, 국방용으로 응용연구가 활발히 진행되고 있다(전력저장용, 인공위성의 태양광 에너지 저장 및 자세제어용, 무소음 적진침투용 차세대 전차의 보조동력원 등). 고효율의 에너지 저장 및 재생을 위해 플라이휠 에너지 저장시스템은 크게 .고속화, 고에너지저장을 위한 복합재 플리이휠 로터.공기 마찰손실 저감용 자가 진공펌프(Self Vacuuming system).지지부 접촉마찰로 인한 에너지 손실 저감용 자기베어링/제어부.플라이휠 구동 및 발전을 위한 Motor/generator.고효율 에너지 입출력 제어부 등의 첨단기술부품으로 구성되어 있는 바, 본 논문에서는 이러한 플라이휠 에너지 저장기술의 국내외 개발현황을 소개하고 현재까지 파악된 기술적 문제점 및 향후 기술개발 전망에 대해 논하고자 한다.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.116-120
• /
• 2010

Overall total length of hydraulic pipe to transport the hot water in the domestic district heating network is above 3,000 Km approximately. This long pipe network requires a lots of the transport pumping power by surface friction of fluid. In this study, the drag reduction(DR) of Amin Oxide $C_{18}$ as non-ionic surfactant according to the fluid velocity, temperature and surfactant concentration under the condition of above $80^{\circ}C$ fluid temperature were investigated experimentally. Results showed that new amin oxide $C_{18}$ surfactant had DR of maximum 30% in fluid temperature of $80^{\circ}C$ and had 15% DR in fluid temperature over $100^{\circ}$ under short time test condition. And amine oxide had 155 hours duration time to keep the DR characteristic in the fluid temperature of $80^{\circ}$ and 1000 ppm concentration. But duration time of DR was decreased when fluid temperature increased.

• The Journal of the Korea Contents Association
• /
• v.16 no.4
• /
• pp.614-623
• /
• 2016

Grid(pipe network) design is an important element of Smart Water Grid, which essential to estimate hydraulic parameters such as the pressure, friction factor, friction velocity, head loss and energy slope. Especially, friction velocity in a grid is an important factor in conjunction with energy gradient, friction coefficient, pressure and head loss. However, accurate estimation friction head loss, friction velocity and friction factor are very difficult. The empirical friction factor is still estimated by using theory and equation which were developed one hundred years ago. Therefore, in this paper, new equation from maximum velocity and friction velocity is developed by using integration relationship between Darcy-Weisbach's friction head loss equation and Schlichting equation and regression analysis. To prove the developed equation, smooth pipe data areis used. Proposed equation shows high accuracy compared to observed data. Study results are expected to be used in stability improvements and design in a grid.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2080-2093
• /
• 2008

Disk brake system take charge of maximum braking energy among the mechanical brake systems for high speed train. For this reason, Metallic friction materials and heat resistant steel disk is adopted at disk brake system for high speed train. It was investigated tribological characteristics(friction coefficient, friction stability, wear rate and braking temperature) between some kinds of metallic friction materials and heat resistant steel disk. Cu-based friction material for high speed train have suitable tribological characteristics.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1991.07a
• /
• pp.11-17
• /
• 1991

현재 사용중인 대부분의 항만부진동 예측을 위한 수치모형은 Lee(1969), Chen and Mei(1974)의 경우와 같이 Helmholtz 방정식을 사용하고 있으나 여기에는 경계면에서의 에너지 흡수 및 해저면 마찰에 의한 에너지 감쇠가 제외되었다. 그러나, 항내 파랑응답 문제에서는 경계면에서의 흡수와 해저면 마찰에 의한 에너지 감쇠가 중요한 역할을 하는 것으로 보고되고 있다(Ganaba et al., 1982).(중략)

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.648-653
• /
• 2002

2차원 개별요소법을 이용하여 철도사면에 있어서 낙석이 발생되었을 경우 낙석에 의한 운동에너지, 위치에너지 및 마찰에 의한 에너지변화를 사면과 낙석사이의 마찰계수를 매개변수로 하여 분석하였다. 낙석의 낙하양태(미끄러짐과 회전)에 따라 변화하는 1차지면 충돌시간, 2차지면 충돌시간, 2차충돌까지의 비산거리, 1차지면 충돌 후 도약높이, 사면 운동 동안의 낙석 회전횟수 등을 구하였다.

• The Korean Journal of Rheology
• /
• v.7 no.1
• /
• pp.50-59
• /
• 1995

겨울용 타이어인 '발포고무 타이어'의 트레드에 적용되는 발포고무의 물성과 마찰 및 마모특성을 조사하였다. 천연고무인 SMR-CV60과 합성고무인 BR-01(Cis-1, 4 Polybutadiene)을 70:30 비율로 혼합하였고 발포제로는 개질화된 azodicarbonamide (상품 명:UNICELL AD#2)을 변량 첨가하여 다양한 발포도의 발포고무를 준비하였다. 발포도의 증 가로 발포고무의 Young's modulus와 파괴에너지는 점진적으로 감소하였으나 Tan $\delta$ 는 일정한 값을 유지하였다. 매끄러운 유리표면위에서 높은 마찰계수를 보인 발포고무는 발포 도의 증가로 크게 감소하였고 거친 표면일수록 마찰계수는 상승하였다. 이같은 마찰계수의 증감경향이 교차되는 발포도는 30~40%이었다. $0^{\circ}C$에서의 마찰계수도 유리 표면에서감소하 고 거친표면에서 상승하는 경향을 보였으며 증감경향이 교차하는 발포도는 20%로 낮아졌 다. 마찰표면을 마그네시아 분말로 처리하면 전반적으로 마찰계수는 감소하였고 발포도의 크기에 관계없이 마찰표면이 거칠수록 큰 마찰계수를 나타내었다. 발포고무의 발포도가 커 지면 마모손실량도 비례하여 증가하였으며 발포도가 낮은 고무에서는 비교적 규칙적인 융기 간격이 보였으나 발포도가 30%이상으로 되면 불규칙적인 마모표면과 더불어 많은 마모 부 스러기가 관찰되었다.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.760-766
• /
• 2010

In this paper, The static friction torque and viscous friction torque including hydraulic motor-load system driven by hydraulic proportional control valve analysis. The basic experimental was performed toward characteristic in pressure and flow rate in hydraulic system energy. The variable of friction torque was experiment on brake pressure variable using pneumatic brake system. The analysis of nonlinear friction and linear friction was perform ed toward friction characteristic of hydraulic system.