• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1998.09a
• /
• pp.36-39
• /
• 1998

불규칙파를 스펙트럼파로 파악하여 조석 조건하 천해역에서 천수, 굴절, 회절, 마찰 및 쇄파 등에 의하여 불규칙파가 변이하는 현상을 해석하였다. 지배방정식은 에너지보존식과 파수백타보존식인데 파수벡타보존식에 회절효과를 고려하는 항을 포함하였다. 스텍트럼형상을 재현하기 위하여는 선형누적법을 사용하였으며, 스펙트럼파에 대한 대표 마찰계수를 간단히 산정하는 약산식을 사용하여 마찰손실효과를 고려하였다. (중략)

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1990.11a
• /
• pp.1-15
• /
• 1990

엔진 성능의 향상에 맞추고 에너지 절약을 위한 방법으로써 엔진 오일의 마찰 마모 특성등 오일의 성능을 높이려는 노력이 꾸준히 시도되고 있다. 특히 마찰력 손실을 감소기키기 위해서 낮은 마찰특성을 갖도록 몰리브데늄(Mo)을 유용성인 금속 착화합물로 만든 Mo-DTP를 제조하여 현재 첨가제로 널리 사용되는 Zn-DTP와 대체시키려는 연구가 활발하고 최근엠 많은 논문이 발표되고 있다. 또 일부 윤활유 제조 회사에서는 몰리브레늄을 첨가 시키는 등 제품 기술을 향상시켜 오일 교환의 기간이나 자동차 주행 거리를 대폭적으로 늘려줄 수 있는 상품도 생산되고 있다. 윤활 첨가제로써 Mo-DTP를 Zn-DTP와 대체시켜 기유에 혼합한 경우에는 마찰 감소 기능이 매우 향상 되었고 내 마모성도 비교적 좋으나 산화 억제 능력이 부족하고 온도의 상승에 따른 점도 지수의 증가도 비교적 크다는 단점을 갖고 있음이 발표된바 있다. 따라서 Mo-DTP의 단점을 보완하려는 연구가 필요되고 그의 한 방법으로써 현재 첨가제로 가장 많이 사용되는 Zn-DTP와 혼합하여 첨가 하였을 경우에 대한 연구를 하였다. 이때 기본 윤활유에 Mo-DTP와 Zn-DTP를 적당한 혼합 비율로 첨가하고 하중, 온도를 변화 시키면서 마찰, 마모등의 성질고 산화 안정성 및 마모 입자 분석 등 전반적인 윤활유로써의 특성을 살펴 보았다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1996.10a
• /
• pp.184-187
• /
• 1996

기존의 항만 부진동현상 해석은 대부분 완전유체라는 가정하에 선형이론에 기초하여 개발된 수치 모델에 의해 수행되고 있다. 실제의 경우에는 해저면의 마찰, 고체경계면을 따른 에너지 손실, 단면의 급 축소 및 확대에 따른 에너지 손실 등이 존재하므로, 이와 같은 에너지의 손실을 고려하지 않고 선형해석을 수행하게 되면 실제와는 다른 과장된 결과를 얻게 된다. 특히, 항 입구의 폭이 좁은 경우에는 실제와는 다르게 증폭비가 대단히 크게 예측된다. (중략)

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.169.2-169
• /
• 2001

• 수도
• /
• v.23 no.1_2 s.76_77
• /
• pp.71-81
• /
• 1996

• Nuclear Engineering and Technology
• /
• v.26 no.2
• /
• pp.179-189
• /
• 1994

A performance of reactor coolant pump in two-phase flow is examined using the pump geometric conditions and the performance of the pump in single-phase flow. Wall friction loss of the reactor coolant pump in single-phase flow is prdicted using the Truckenbrodt boundary layer theory, and the head loss in two-phase flow is predicted with calculated well friction loss and separation loss coefficients. The analysis results are compared with the Combustion Engineering pump test data. The effect of two-phase multiplier on the peak clad temperature in Loss-of-Coolant Accident is also examined using the RELAP5 and the results indicate the importance of its accuracy.

• Journal of Korea Water Resources Association
• /
• v.34 no.1
• /
• pp.31-43
• /
• 2001

The friction factor of commercial pipe varies with wide range depending on pipe type and pipe size. Various methods can describe the wide variation of friction factor with good accuracy, but they normally require an iteration process even for solution of a simple case. Power law can result in an explicit form of solver so that the power law is rigorously employed for the development of direct solution technique. The parameters used in the present form of power law are allowed to haute some variation with pipe size and Reynolds number as well as pipe type for wider coverage with good accuracy, while Hazen-Williams equation permits limited variation which accounts only for the roughness or the pipe type. Furthermore secondary loss is considered in the development of explicit equations for design of commercial pipes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.689-695
• /
• 2012

The friction factor in a rod bundle and the loss coefficient at a spacer grid were examined. As a test section, 25 smooth rods, 9.5 mm in diameter and 2000 mm in length, were prepared and installed in a $5{\times}5$ square array in a square channel. In this case, the P/D (Pitch-to-Diameter ratio) was 1.35. In this work, plain (i.e., no mixing vanes), split-vane, and hybrid-vane spacer grids were tested. In a bare rod bundle (i.e., no spacer grid), the measured friction factors were in good agreement with the previous correlations. Among the spacer grids tested, the hybrid-vane spacer grid presented the largest friction factor in the rod bundle and loss coefficient. This may be because of the flow pattern change induced by large relative plugging of the flow cross section and mixing vane geometry. At Re=$5{\times}10^5$, the predicted loss coefficients of plain, splitvane, and hybrid-vane spacer grids were approximately 0.79, 0.80, and 0.88, respectively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.554-570
• /
• 1990

he rolling contact behaviors between a smooth ball and a flat rough surface under dynamic load are intricately affected by many factors, such as the diameter of a ball, normal load and the roughness of a flat surface etc. Accordingly, the experimental study is done to find them on the base of elastic hysteresis loss as theoretical approach is very difficult. The experimental apparatus composed of damped-free vibration system is used. This paper investigates the damping characteristics on the rolling contact area through rolling friction force and logarithmic decrement versus displacement obtained in accordance with the variations of those factors, and presents a new experimental method to find out contact width using the relations of logarithmic decrement and rolling friction force with displacement.

• Tribology and Lubricants
• /
• v.26 no.4
• /
• pp.224-229
• /
• 2010

A new test rig is presented to measure friction losses at journal bearings in a reciprocating compressor. This rig consists of a test bearing, torque sensor, driving motor and loading parts especially for vertical shaft. Friction losses are obtained by measuring torque between motor and test bearing. The experiments are carried out at several rotational speeds and temperatures. The test results are presented and discussed.