• Title/Summary/Keyword: 마이크로 터빈 발전기

Search Result 21, Processing Time 0.041 seconds

Study on the Monitoring and Control System for Micro Gas Turbine (마이크로 가스 터빈의 감시 제어 시스템에 관한 연구)

  • Cho, Chang-Hee;Park, Min-Kook;Ahn, Jong-Bo;Kim, Sung-Shin
    • Proceedings of the KIEE Conference
    • /
    • 2005.07b
    • /
    • pp.1733-1735
    • /
    • 2005
  • 최근의 소형 분산 전원의 보급 필요성의 커짐으로 전력과 열에너지를 동시에 생산, 이용함으로서 종합 에너지 효율이 높고 공해 배출 및 소음 특성이 우수한 초소형 가스터빈 발전 시스템에 대한 수요가 급증하고 있다. 본 논문은 마이크로 가스터빈 시스템과 그 제어장치의 동작 상태를 모니터링 및 제어하기 위한 마이크로 가스터빈 감시 제어장치와 사용자 인터페이스 프로그램을 소개한다. 마이크로 가스 터빈은 초고속(수만$\sim$10만 RPM)으로 회전하여 발전을 하므로 터빈 및 전동기 설계 기술과 더불어 고성능의 제어 시스템을 필요로 한다. 마이크로 가스터빈의 감시 제어 시스템은 터빈, 발전기 및 전력 변환장치를 제어하는 고성능의 DSP 제어장치들과 고속 직렬 통신 방식으로 연결되어 시스템의 제어 및 상태 감시를 위한 최적의 솔루션을 제공함으로서 마이크로 가스터빈의 개발자와 운용자의 보조 역할을 담당한다.

  • PDF

Study of power generation used low pressure steam on small sacle waste incinerator (중소형폐기물소각설비의 폐증기를 활용한 저압발전에 관한 연구)

  • Jeon, Kuem-Ha
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.06a
    • /
    • pp.794-797
    • /
    • 2009
  • 중소형 폐기물 소각설비의 폐열보일러에서 생산되는 10 $kg/cm^2$미만의 저압증기를 이용한 증기터빈발전에서 증기의 건도를 높이이 위한 증기 전처리가 필수적이며, 건도를 증가시킨 증기를 이용하여 발전실험을 하였다. 본 연구에 적용된 증기터빈발전기는 마이크로 축류식 증기터빈으로 배압식을 채택하였으며, 증기터빈에 공급되는 증기압력의 증가에 따라 증기공급량, 발전량이 증가하였으며, 이에 따른 발전 효율은 설비의 효율에 따라 변하였다. 또한, 배압식 증기터빈의 경우, 공급.배기측의 증기 압력의 차이가 증가함에 따라 발전을 위한 증기 소비율이 감소하고 발전 효율이 증가함을 볼 수 있었다.

  • PDF

Analysis on Economic Dispatch in Islanded Microgrid System (독립 마이크로그리드 시스템의 경제급전 분석)

  • Joung, Kwang Woo;Choi, DongHee;Park, Jung-Wook
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.523-524
    • /
    • 2015
  • 신재생 에너지는 발전 시 연료가 들지 않는다는 특징과 친환경적인 이유로 각광 받고 있다. 이러한 특징으로 인해 에너지 독립 계통을 구성하는 데 주요 역할을 한다. 풍력, 태양광, 에너지 저장 장치 등이 분산 전원으로서 계통을 구성하게 되는데, 낮은 효율과 높은 초기 설치비용으로 인해 디젤 발전기나 마이크로 터빈 등 소형 발전기를 예비 전력으로서 부착하는 경우가 대부분이다. 이러한 분산 전원들은 가격이 제각각이며 기존의 화석연료 발전기처럼 비용 함수 모델링이 어려워 경제적 분석이 어려웠다. 이 논문은 이러한 신재생 에너지를 사용한 독립 마이크로그리드를 경제적 관점에서 분석하는 것이 목적이다. 따라서 계통을 분석하는 가장 보편적인 방법인 최적 조류 계산(OPF, Optimal Power Flow)방법과 가격을 최소화하는 점을 찾는 경제급전(ED, Economic Dispatch)방법을 사용하였다. 두 가지 방법의 결과를 비교하여 발전 비용을 줄일 수 있는지에 대해 조사하였다. 7-Bus 가상 계통을 만들어 사용하였고, OPF와 ED의 발전 비용은 PowerFactory$^{(R)}$ 프로그램을 통해 시뮬레이션 하여 데이터를 얻었다.

  • PDF

Prediction of Power and Efficiency Requirement of Motor/generator for 500W Class Micro Gas Turbine Generator Considering Losses (손실을 고려한 500W급 마이크로 가스터빈 발전기용 전동발전기의 요구동력 및 요구효율 선정)

  • Park, Cheol-Hoon;Choi, Sang-Kyu;Ham, Sang-Yong
    • The KSFM Journal of Fluid Machinery
    • /
    • v.14 no.5
    • /
    • pp.24-30
    • /
    • 2011
  • 500W class MTG(Micro turbine generator) operating at 400,000 rpm is under development. From the cycle analysis, it is decided that the self-sustaining speed of MTG is 200,000rpm and the generating speed is 400,000 rpm. Therefore, motor should be designed so that it is able to rotate the rotor up to 200,000rpm and generator should designed so that it is able to generate 500W output at 400,000rpm. First step to design motor/generator is to determine the power and efficiency requirement. Not only the power into the compressor and from the turbine at the operating speed but also the mechanical and electrical losses should be considered in determining the power and efficiency requirement. This study presents the procedure and the results of determining the power and efficiency requirement considering the mechanical and electrical losses depending on the rotating speed which is measured from the experiment.

Experimental Study on Thermal Insulation and Cooling for Rotor/Bearing Area in 500W Class Micro Gas Turbine Generator (500W급 마이크로 가스터빈 발전기 회전체-베어링부의 단열 및 냉각 성능에 대한 실험적 연구)

  • Park, Cheol Hoon;Choi, Sang Kyu;Ham, Sang Yong
    • The KSFM Journal of Fluid Machinery
    • /
    • v.17 no.3
    • /
    • pp.19-24
    • /
    • 2014
  • Development of long-term mobile energy sources for mobile robots or small-sized unmanned vehicles are actively increasing. The micro gas turbine generator (MTG) is a good candidate for this purpose because it has both of high energy density and high power density, and 500W class MTG is under development. The designed MTG can be divided into 2 main parts. One part consists of motor/ generator and compressor, and the other one consists of combustor, recuperator and turbine. 500W class MTG is designed to operate at ultra-high speed of 400,000 rpm in high turbine temperature over $700^{\circ}C$ to improve the efficiency. Because the magnetism of NdFeB permanent magnet for the motor/generator could be degraded if the temperature is over $150-200^{\circ}C$, MTG needs the thermal insulation to block the heat transfer from combustor/turbine side to motor/generator side. Moreover, the motor/generator is allocated to get the cooling effect from the rapid air flow by the compressor. This study presents the experimental results to verify whether the thermal insulator and air flow are effective enough to keep the motor/generator part in the low temperature less than $100^{\circ}C$. From the motoring test by using the high temperature test rig, it was confirmed that the motor/generator part could maintain the temperature less than $50^{\circ}C$ under the condition of 1.0 bar compressed air.

Optimization of Controller Execution Cycle Time for Digital Speed Governor (디지털 조속기용 제어기 실행주기 최적화)

  • Kim, Byoung-Chul;Jung, Chang-Gi;Kim, Jong-An;Choi, In-Kyu;Woo, Joo-Hee
    • Proceedings of the KIEE Conference
    • /
    • 2006.07d
    • /
    • pp.1883-1884
    • /
    • 2006
  • 원자력발전소는 원자로의 증기발생기에서 생산한 증기의 압력으로 터빈발전기를 돌려서 발전을 하고 있다. 터빈속도를 제어하는 디지털식 터빈 조속기는 마이크로프로세서를 기반으로 하는 디지털식 제어기가 널리 사용하고 있으며, 조속기에 사용되는 제어기는 빠른 제어 응답성과 높은 신뢰성을 요구하고 있으므로 제어 프로그램의 실행속도에 따라서 제어의 특성과 질이 좌우 될 수 있다. 디지털식 제어기는 제어프로그램을 순차적으로 반복 실행하며, 중요도에 따라서 몇 개의 그룹으로 나누어 실행 주기를 달리함으로써 제어기의 과도한 부하율을 피하고 있다. 이렇게 함으로써 빠른 제어 응답성과 시스템 안정성을 모두 만족하는 실행주기로 최적화하는 과정이 필요하여 본 시험을 하였으며 이러한 제어특성을 사전에 확인하여 원자력발전소의 아날로그식 조속기를 디지털식 조속기로 개선을 하고자 시험한 사례를 소개한다.

  • PDF

Development of Test Facility for Micro Gas Turbine (마이크로 가스터빈 시험 장치 개발)

  • Lim, Hyung-Soo;Choi, Bum-Seog;Park, Moo-Ryong;Hwang, Soon-Chan;Park, Jun-Young;Seo, Jeongmin;Bang, Je-Sung;Lim, Young-Chul;Oh, In-Kyun;Kim, Byung Ok;Cho, Ju Hyeong
    • The KSFM Journal of Fluid Machinery
    • /
    • v.18 no.5
    • /
    • pp.42-48
    • /
    • 2015
  • To improve the core technology of the micro gas turbine, the performance test facility was developed. This paper is focusing on the explanation of the characteristics of micro gas turbine and its assist devices. Major part of micro gas turbine were radial type of compressor, annular type of combustor, radial type of turbine, thrust foil bearing, radial foil bearing and generator. The assist devices were consist of exhaust duct, inverter, data acquisition system, load bank and test cell. Before building up the test facility, the component test was previously conducted to confirm the component performance. After the test facility was prepared, the motoring test was conducted to investigate the rotor dynamic characteristics of the micro gas turbine. Also, the part load performance test was performed. With a developed micro gas turbine test facility, the improved core technology about the micro gas turbine can be suggested to the related industries.